Re: [PATCH v6 4/5] arm64: dts: sdm845: Add serial console support
On 05/23/2018 08:43 PM, Doug Anderson wrote: > Rajendra, > > On Tue, May 22, 2018 at 11:30 PM, Rajendra Nayak> wrote: >> >> >> On 03/30/2018 10:38 PM, Karthikeyan Ramasubramanian wrote: >>> From: Rajendra Nayak >>> >>> Add the qup uart node and geni se instance needed to >>> support the serial console on the MTP. >>> >>> Signed-off-by: Rajendra Nayak >>> Signed-off-by: Karthikeyan Ramasubramanian >>> --- >> >> Andy, is it possible to pull this one in for 4.18? >> Sorry, I only realized we somehow missed this after looking at your pull >> request. >> >> This is the only patch that prevents linux-next from booting up my sdm845 MTP >> to a minimal console shell. > > It was in Andy's tree but then got dropped. Unfortunately the clock > bindings didn't land early enough so it's a bit difficult to land any > device tree changes that use the clock bindings until the next kernel > revision... ah, okay, did not realize that. Thanks for clarifying. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v6 4/5] arm64: dts: sdm845: Add serial console support
Rajendra, On Tue, May 22, 2018 at 11:30 PM, Rajendra Nayakwrote: > > > On 03/30/2018 10:38 PM, Karthikeyan Ramasubramanian wrote: >> From: Rajendra Nayak >> >> Add the qup uart node and geni se instance needed to >> support the serial console on the MTP. >> >> Signed-off-by: Rajendra Nayak >> Signed-off-by: Karthikeyan Ramasubramanian >> --- > > Andy, is it possible to pull this one in for 4.18? > Sorry, I only realized we somehow missed this after looking at your pull > request. > > This is the only patch that prevents linux-next from booting up my sdm845 MTP > to a minimal console shell. It was in Andy's tree but then got dropped. Unfortunately the clock bindings didn't land early enough so it's a bit difficult to land any device tree changes that use the clock bindings until the next kernel revision... -Doug -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v6 4/5] arm64: dts: sdm845: Add serial console support
On 03/30/2018 10:38 PM, Karthikeyan Ramasubramanian wrote: > From: Rajendra Nayak> > Add the qup uart node and geni se instance needed to > support the serial console on the MTP. > > Signed-off-by: Rajendra Nayak > Signed-off-by: Karthikeyan Ramasubramanian > --- Andy, is it possible to pull this one in for 4.18? Sorry, I only realized we somehow missed this after looking at your pull request. This is the only patch that prevents linux-next from booting up my sdm845 MTP to a minimal console shell. Thanks, Rajendra > arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 41 > + > arch/arm64/boot/dts/qcom/sdm845.dtsi| 39 +++ > 2 files changed, 80 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > index 979ab49..17b2fb0 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts > @@ -12,4 +12,45 @@ > / { > model = "Qualcomm Technologies, Inc. SDM845 MTP"; > compatible = "qcom,sdm845-mtp"; > + > + aliases { > + serial0 = > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > + { > + geniqup@ac { > + status = "okay"; > + > + serial@a84000 { > + status = "okay"; > + }; > + }; > + > + pinctrl@340 { > + qup-uart2-default { > + pinconf_tx { > + pins = "gpio4"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + pinconf_rx { > + pins = "gpio5"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + qup-uart2-sleep { > + pinconf { > + pins = "gpio4", "gpio5"; > + bias-pull-down; > + }; > + }; > + }; > }; > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi > b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 32f8561..71801b9 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -6,6 +6,7 @@ > */ > > #include > +#include > > / { > interrupt-parent = <>; > @@ -194,6 +195,20 @@ > #gpio-cells = <2>; > interrupt-controller; > #interrupt-cells = <2>; > + > + qup_uart2_default: qup-uart2-default { > + pinmux { > + function = "qup9"; > + pins = "gpio4", "gpio5"; > + }; > + }; > + > + qup_uart2_sleep: qup-uart2-sleep { > + pinmux { > + function = "gpio"; > + pins = "gpio4", "gpio5"; > + }; > + }; > }; > > timer@17c9 { > @@ -272,5 +287,29 @@ > #interrupt-cells = <4>; > cell-index = <0>; > }; > + > + geniqup@ac { > + compatible = "qcom,geni-se-qup"; > + reg = <0xac 0x6000>; > + clock-names = "m-ahb", "s-ahb"; > + clocks = < GCC_QUPV3_WRAP_1_M_AHB_CLK>, > + < GCC_QUPV3_WRAP_1_S_AHB_CLK>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + status = "disabled"; > + > + uart2: serial@a84000 { > + compatible = "qcom,geni-debug-uart"; > + reg = <0xa84000 0x4000>; > + clock-names = "se"; > + clocks = < GCC_QUPV3_WRAP1_S1_CLK>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <_uart2_default>; > + pinctrl-1 = <_uart2_sleep>; > + interrupts = ; > + status = "disabled"; > + }; > + }; > }; > }; > -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v6 4/5] arm64: dts: sdm845: Add serial console support
From: Rajendra NayakAdd the qup uart node and geni se instance needed to support the serial console on the MTP. Signed-off-by: Rajendra Nayak Signed-off-by: Karthikeyan Ramasubramanian --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 41 + arch/arm64/boot/dts/qcom/sdm845.dtsi| 39 +++ 2 files changed, 80 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 979ab49..17b2fb0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -12,4 +12,45 @@ / { model = "Qualcomm Technologies, Inc. SDM845 MTP"; compatible = "qcom,sdm845-mtp"; + + aliases { + serial0 = + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + + { + geniqup@ac { + status = "okay"; + + serial@a84000 { + status = "okay"; + }; + }; + + pinctrl@340 { + qup-uart2-default { + pinconf_tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf_rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup-uart2-sleep { + pinconf { + pins = "gpio4", "gpio5"; + bias-pull-down; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 32f8561..71801b9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -6,6 +6,7 @@ */ #include +#include / { interrupt-parent = <>; @@ -194,6 +195,20 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_uart2_default: qup-uart2-default { + pinmux { + function = "qup9"; + pins = "gpio4", "gpio5"; + }; + }; + + qup_uart2_sleep: qup-uart2-sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + }; }; timer@17c9 { @@ -272,5 +287,29 @@ #interrupt-cells = <4>; cell-index = <0>; }; + + geniqup@ac { + compatible = "qcom,geni-se-qup"; + reg = <0xac 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = < GCC_QUPV3_WRAP_1_M_AHB_CLK>, +< GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + uart2: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0xa84000 0x4000>; + clock-names = "se"; + clocks = < GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <_uart2_default>; + pinctrl-1 = <_uart2_sleep>; + interrupts = ; + status = "disabled"; + }; + }; }; }; -- Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html