Hi all,
trying to confirm that it is not a problem related with the USB
stick (I guess it isn't since I've seen no messages in the list about
that point), I've tried to watch TV from Windows with the same usb
stick from Freecom... four hours [CSI Las Vegas, Miami and New York +
ads]
Hi,
I have a Terratec Cinergy Hybrid T XS USB and I followed the instructions found
on :
http://www.linuxtv.org/v4lwiki/index.php/Em2880#Installation
I've compiled the modules and installed them (modprobe em28xx and modprobe
em2880-dvb). Everything is ok and I can see the TV.
But now, I have
Hi everybody,
I sent in the following three patches for three times now, and they are still
not even part of the mm-tree.
The first one is a documentation fix synchronizing the current as-is-state of
kernel compilation.
The second one makes a module called dvb-pll.c deselectable as it is
I've build the drivers from http://linuxtv.org/hg/~pb/v4l-dvb, but the
frontend on the stick is still not recognized - (on FC6) I get:
usb 2-8: new high speed USB device using ehci_hcd and address 20
usb 2-8: configuration #1 chosen from 1 choice
dib0700: loaded with support for 2 different
Em Ter, 2006-11-14 às 17:47 +0100, Uwe Bugla escreveu:
Hi everybody,
Number ONE:
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -9,9 +9,15 @@
Please see Documentation/dvb/cards.txt = o Cards based on the Conexant
Bt8xx PCI bridge:
Compiling kernel please
Hi,
the Freecom dvb-t receiver that I bought last week gives the following error
in dmesg:
dvb-usb: recv bulk message failed: -110
the device uses the dvb-usb-tt200u driver and identifies in lsusb as
Bus 004 Device 002: ID 14aa:0226 AVerMedia (again) or CE
This is also mentioned in some
Steven,
What kernel are you using? I had this problem which seemed to resolve itself
when I changed kernels 2.6.16-2.6.17 IIRC. However, I never resolved the
tuning offset issues.
Cheers
Mark
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Mark Howells wrote:
Steven,
What kernel are you using? I had this problem which seemed to resolve
itself when I changed kernels 2.6.16-2.6.17 IIRC. However, I never
resolved the tuning offset issues.
I have the kernel 2.6.18-ck1 as can be seen in the dmesg. Do you think it
has something to
Dave Leatherdale wrote:
Hi
I recently got a few of the Hauppauge nova-t stick devices. I tried using
the latest source from http://linuxtv.org/hg/v4l-dvb and the /~pb/v4l-dvb
trees but I always get no frontend was attached. I'm running Ubuntu 6.10
powerpc on a mac mini.
dmesg output:
[
I get a very slightly different output if it helps
[ 107.404506] DVB: registering new adapter (Hauppauge Nova-T Stick).
[ 107.595411] I2C read failed on address 9
[ 107.595747] I2C read failed on address 40
[ 107.596288] I2C read failed on address 9
[ 107.596293] DiB7000M:i2c read error on
Graham Leggett wrote:
Hi all,
I have been searching for a USB2 DVB-S receiver that is capable of
receiving a full transport stream, with working Linux drivers.
The last time I looked, the only USB capable receivers out there were
v1.1, and incapable of receiving a full TS as a result.
Are
11 matches
Mail list logo
