Hi guys, I'm just wondering how the development for the DViCO FusionHDTV
DVB-T Dual Digital 4 driver is going. I'm keen to get my card working, if I
can lend a hand at all let me know though I'm only a java/c# developer and
not had any experience with kernel development.
I have one of these cards
'afternoon all,
Yes, I'm back on the list to show off my cluelessness some more!
An update on my saga. I have moved to OpenSUSE 10.2 (sorry Mattias
:-) in an attempt to get my DViCO FusionHDTV DVB-T Dual Digital rev
1.4 card working. The card is in fact recognised OOTB, but I could
not get it
Hi all,
I'm newbi on this mailing-list...Excuse-me, I'm a French guy. I'm not
very good at English. I hope you will understand what I write on my mail.
I've got a problem in order to use my "grey" pinnacle remote
I've tried to use the ideas from this mail
http://lists.zerezo.com/video4linux/
heissan
attached patch adds a little delay before usb-control message sending to
avoid i2c timeouts (unwanted message log errors) seen many people.
Looks like gl861 usb-controller messes up and stops responding if i2c
messages are send too fast. This happens especially with faster
computers.
I have successfully installed kernel 2.6.20 and the v4l cvs driver to
get my Twinhan Starbox 2 running. But when loading the module i get an
error:
Linux video capture interface: v2.00
saa7146: register extension 'dvb'.
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: not r
e9hack wrote:
Mattias Bergsten wrote:
However:
The Patch changes the following things:
- Added the KNC ONE Plus DVB-C card with the id 1894:0022
The KNC1 DVB-C Plus card I'm thinking of buying has the Windows ID
"PCI\VEN_1131&DEV_7146&SUBSYS_00231894", that is 1894:0023 - not
1
On Tue, 13 Feb 2007 21:14:24 +0100, "David Härdeman" <[EMAIL PROTECTED]>
said:
> I would recommend that you use input-kbd from input-utils to create a
> custom keymap and load it each time your machine boots. This way you
> won't have to change any sources and you'll be sure that it will keep o
On Monday 12 February 2007 23:54:28 e9hack wrote:
> Hi,
>
> it exist some new DVB-C budget cards, which are based on the KNC ONE
> (Terratec, Setalco) design. They are using a new tuner with the
> TDA10023 as demodulator. The main work to support this chip was done
> by Georg Auer. He has implement
On Tue, Feb 13, 2007 at 06:30:21PM +, Darren Salt wrote:
I demand that Jouni may or may not have written...
[snip]
I am using a learning remote, which has same numpad keys and some other
keys as the one bundled with the card. And I also collected some additional
commands from other rc5(Phil
Mattias Bergsten wrote:
>
> However:
>
>> The Patch changes the following things:
>> - Added the KNC ONE Plus DVB-C card with the id 1894:0022
>
> The KNC1 DVB-C Plus card I'm thinking of buying has the Windows ID
> "PCI\VEN_1131&DEV_7146&SUBSYS_00231894", that is 1894:0023 - not
> 1894:0022.
>
> A
On Tue, 13 Feb 2007 18:30:21 +, "Darren Salt"
<[EMAIL PROTECTED]> said:
> If with the original remote control that is the case, then there's a bug
> (and the card's PCI ID is needed so that it can be fixed).
Oops, sorry, it after all was not the same numpad keyset on my learning
remote that
Hello,
I tried to track the problem, and it is almost as if the CAM module
isn't actually reset when the driver is unloaded/loaded.
The CAM succesfully initializes if the CAM wasn't initialized .
If the CAM was allready initialized once without being ejected the
CAM will not initialize suc
I demand that Jouni may or may not have written...
[snip]
> I am using a learning remote, which has same numpad keys and some other
> keys as the one bundled with the card. And I also collected some additional
> commands from other rc5(Philips)-remotes, so that all available keys had a
> sensible
Hello,
I am using the AverMedia DVB-T Volar USB tuner. With 2.6.18-gentoo kernel
it worked fine. Now I upgraded to 2.6.20-gentoo and the firmware file
dvb-usb-dib0700-01.fw was newly needed to run it.
I would like to report what I consider a bug - the device stays permanently
ON - the blue LED
On Tue, 13 Feb 2007 01:43:44 +0100, "David Härdeman" <[EMAIL PROTECTED]>
said:
> Are you using the remote that was sold with the card or some other
> remote? Looking at the dmesg you posted, I think the rc5_device number
> of your remote is 5, so could you try loading the module with
> "rc5_de
David Härdeman wrote:
> On Tue, February 13, 2007 6:29, Oliver Endriss said:
> > Well, it might be better but it is not correct yet. ;-)
> > ...
> > For a long keypress the driver must produce '1-2-2-2-2-...-2-0' Key
> > events (Reset events omitted).
>
> I know that. The driver has never gotten t
Halim Sahin wrote:
> I found this in my syslog:
> dvb-ttpci: __av7110_send_fw_cmd(): timeout waiting for COMMAND idle
> dvb-ttpci: av7110_send_fw_cmd(): av7110_send_fw_cmd error -110
> dvb-ttpci: av7110_fw_cmd error -110
>
> What is the reason for this?
>
> I am searching what causes my ts-continu
Op 12-feb-2007, om 22:55 heeft Kristof Pelckmans het volgende
geschreven:
Is this budget-av module also required for a Technotrend Premium
card ? I tried inserting the module, but it doesn't seem to do much...
Ah, I perhaps assumed to much. It might not be a 'budget' card. I
tried figur
On Tue, February 13, 2007 6:29, Oliver Endriss said:
> Well, it might be better but it is not correct yet. ;-)
> ...
> For a long keypress the driver must produce '1-2-2-2-2-...-2-0' Key
> events (Reset events omitted).
I know that. The driver has never gotten this right (neither in the old
versio
Hello
I found this in my syslog:
dvb-ttpci: __av7110_send_fw_cmd(): timeout
waiting for COMMAND
idle
dvb-ttpci: av7110_send_fw_cmd(): av7110_send_fw_cmd error -110
dvb-ttpci: av7110_fw_cmd error -110
What is the reason for this?
I am searching what causes my ts-continuity errors while recording
Is there any status on the twinhan1027 drivers?
I currently have 2 of them and I can't get the interface to work.
Unrecognized - won't make any dvb devices in /dev
It uses the cx23883 & mb86a16l
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://ww
21 matches
Mail list logo
