이진봉 wrote:
> fixup needed in changing of fw-data for Big endian system.
> If don't fix this problem, Big endian system can't probe this dvb device.
>
> This patch make dvb device to be able probe & active both of Little endian
> system and Big endian System.
I've tested your patch on my machine,
Title: Samsung Enterprise Portal mySingle
fixup needed in changing of fw-data for Big endian system.
If don't fix this problem, Big endian system can't probe this dvb device.
This patch make dvb device to be able probe & active both of Little endian system and Big endian System.
*** cxusb.
On Sunday 11 February 2007 12:46, Nico Sabbi wrote:
> already done: dvbstream from cvs can already stream to multiple
> unicast/multicast/file streams
> repeating pids to each of them, and it's very lightweight (although I
> have to admit it's a bit untidy).
> http://sourceforge.net/projects/dvbtoo
I demand that Teemu Suikki may or may not have written...
[snip]
> It would be nice if the keys could be configured from user space..
That was the point of converting budget-ci to use ir-common - so that the
configuration could be done with standard tools. input-utils will do this
job; it's proba
I've tested your patch (in v4l-dvb repository). It worked fine, once I
increased the delay to 15us. I refined the patch a bit to be able to set
the access gap time with a module parameter.
System specs:
CPU: AMD 4200+ X2 CPU
Motherboard: Asus M2NPV-VM
Memory: 1G DDR2 PC6400 CL5 Dual-Channel
/ Jon
Hello
I have a problem with a KNC1 DVB-C card, first was not recognized by the
system, and on a lspci -vv reported :
00:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: KNC One: Unknown device 0022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VG
Hello,
Kernel 2.6.20 gives me the messages like at the end of this email.
I found the patch at
http://www.linuxtv.org/pipermail/linux-dvb/2006-December/014951.html
which should help but does not fix my problem.
I have a HZ of 250 (I think) and am using a VIA Epia EN12000 (1.2 Ghz C3
Esther CPU)
A
Excellent, though I'm in Australia, I will certainly give it a try and let
you know within the coming days how it's gone.
-Brett.
On 2/14/07, Michael Krufky <[EMAIL PROTECTED]> wrote:
Brett Ryan wrote:
> Hi guys, I'm just wondering how the development for the DViCO FusionHDTV
> DVB-T Dual Digi
Hi Janne,
Thank you very much for this specific answer. Do you know why this limitation
exists ? Is this related to bandwidth available with USB busses or too many
interrupts generated by 5 cards (10 tuners) at the same time ?
Regards, Florian
Selon Janne Grunau <[EMAIL PROTECTED]>:
> On Wednes
On Wednesday 14 February 2007 16:18:53 Florian FAINELLI wrote:
> Hi all,
>
> I just saw that the 5 Hauppauge Nova-T 500 cards that I have set up
> are well recognized by the "lsusb" command.
>
> The dib0700 driver loads fine for 4 cards, but the fith generates an
> error "dvb-usb: Hauppauge Nova-T
Hi all,
I just saw that the 5 Hauppauge Nova-T 500 cards that I have set up are well
recognized by the "lsusb" command.
The dib0700 driver loads fine for 4 cards, but the fith generates an error
"dvb-usb: Hauppauge Nova-T 500 Dual DVB-T error while loading the driver
(-23)".
I did not yet dig th
Fix works great man! I commented the lines out provided by Jonas Larsson and
added yours.
Now I can even switch channels faster then before (seems like the do while took
to much time).
And it's even easier to fix the gl861 module (cause you just need to add 1
line).
Don't know if you have to cha
I have somewhat similiar problems to you. I have a Dvico Fusion HDTV5 Gold
card which also uses the cx88-dvb driver. Most of the frequencies work fine
for me except for two. For me they are both lower frequencies: 543Mhz and
549Mhz. 543Mhz exhibits a problem similar to yours. It will lock for
On 2/14/07, Ali H.M. Hoseini <[EMAIL PROTECTED]> wrote:
Janne Grunau wrote:
> On Wednesday 14 February 2007 13:09:33 Ali H.M. Hoseini wrote:
>
>> Hi all,
>>
>> I've searched this mailing list, and internet, and found that is
>> possible to have 6 dvb cards simultaneously with newer linux kerenls.
Janne Grunau wrote:
> On Wednesday 14 February 2007 13:09:33 Ali H.M. Hoseini wrote:
>
>> Hi all,
>>
>> I've searched this mailing list, and internet, and found that is
>> possible to have 6 dvb cards simultaneously with newer linux kerenls.
>> But is it possible to have more than 6 dvb cards? f
moi
Could you test to add one i2c write to zl10535 code as Jan has done:
http://linuxtv.org/pipermail/linux-dvb/2007-January/015518.html
http://linuxtv.org/pipermail/linux-dvb/2007-January/015544.html
This IO bit has something to do with QT1010 tuner AGC (QT1010 has AGC
support "Both wide-band a
Brett Ryan wrote:
> Hi guys, I'm just wondering how the development for the DViCO FusionHDTV
> DVB-T Dual Digital 4 driver is going. I'm keen to get my card working, if I
> can lend a hand at all let me know though I'm only a java/c# developer and
> not had any experience with kernel development.
>
tim belina wrote:
[snip]
> However, the card doesn't work properly:
>
> 1) I see only a single card in YaST, which describes the card as a
> FusionHDTV DVB-T Dual Digital. Perhaps that is correct, but I'm unsure
> if I should see one for each of the "dual" receivers.
Do, "modprobe cx88-dvb" ...
On Wednesday 14 February 2007 13:09:33 Ali H.M. Hoseini wrote:
> Hi all,
>
> I've searched this mailing list, and internet, and found that is
> possible to have 6 dvb cards simultaneously with newer linux kerenls.
> But is it possible to have more than 6 dvb cards? for example 8 dvb
> cards?
Eight
Hi,
I (disappointingly) just purchased one of these sticks, without realising
there were quite so many problems with Linux-DVB. My bad. :-(
I seem to be having the same problem as everyone else, has a fix been
released yet? I am running on 2.6.19.2 with drivers from a HG pull this
morning.
I am
With 13 cards, imagine what kind of copyright violation device you could make!
MPAA would have a field day with you.
DAMN why the hell doesn't this list have a reply-to header???
On 2/14/07, Ali H.M. Hoseini <[EMAIL PROTECTED]> wrote:
Hi all,
I've searched this mailing list, and internet, and
Hi all,
I've searched this mailing list, and internet, and found that is
possible to have 6 dvb cards simultaneously with newer linux kerenls.
But is it possible to have more than 6 dvb cards? for example 8 dvb cards?
I've an industrial pc from icp electronics that lets me to install up to
13 pci
Hello.
The attached patch adds better shifting and masking of SNR and signal
strength to stv0297 frontend. This makes the frontend report more
reasonable strength and SNR values to user space.
I tested the patch only with my Cablestar 2 so mileage with other cards
may vary. Please test and let m
Hi,
I hope this is the right list to post this on - if it's not please
direct me to the correct list.
I'm having a strange problem with tuning and locking some channels on
this card. After a cold boot, it will always lock to any channel, but
after a while (20 minutes or so) it will refuse t
Hi,
I'm facing some tuning problems with my MSI Megasky 580 GL861. Currently I can
tune only to 1 of 3 transponders in my area (fi-Oulu). My other DVB-T receiver
(ASUS P7131 Dual) is working just fine - so it's not a problem with the signal
strength. Tuning to all transponders has worked someti
Can nobody help me with the problem below?
It's got to be something simple as it appears everything is working
apart from the frontend being registered? HELP!!!
I've attached the results of 'lsusb -v' in case it may be of any help.
Thanks in advance.
Dom
-Original Message-
From: [E
On Wed, 14 Feb 2007 10:14:20 +0200 (EET), "Teemu Suikki"
<[EMAIL PROTECTED]> said:
> It would be nice if the keys could be configured from user space..
It is and they can be, see this previous D. Härdeman's post:
http://www.linuxtv.org/pipermail/linux-dvb/2007-February/015905.html
I configured
Good afternoon:
You may remember me, I had a Kernel Panic in a 2.4 smp kernel while trying to
stop dvbx_y. We had the following hints from the list:
> Rev 1.62 of dvb_net.c contains a fix which might solve your problem:
> 'Fix locking to prevent Oops on SMP systems when starting/stopping
>
On Tue, 13 Feb 2007, Jouni wrote:
> Would it be the best solution for me to make a custom ir-keymaps.c?
That's what I did.. I didn't even bother looking at the actual keys, I
just made a keymap where every possible keycode produces some simple
printable output. :) It doesn't matter where the keys
29 matches
Mail list logo