Hi,
On Tue, Mar 27, 2007 at 07:43:19AM +0200, [EMAIL PROTECTED] wrote:
Has anyone had success in compiling this driver?
Only with a 2.6.16 or 2.6.17 kernel. I don't remember it. But the driver
did not worked for me.
I have taken the snapshot from the linuxtv.org website. I have tried
to
Hi Artem,
Quoting Artem Makhutov [EMAIL PROTECTED]:
Hi,
On Tue, Mar 27, 2007 at 07:43:19AM +0200, [EMAIL PROTECTED] wrote:
Has anyone had success in compiling this driver?
Only with a 2.6.16 or 2.6.17 kernel. I don't remember it. But the driver
did not worked for me.
I have taken the
Juha Ruotsalainen wrote:
I shut down the machine after 38 hours oops-free running. Do you guys
have any idea what has caused this increase in stability? Firmware 01,
never hg drivers, ...
It could be the Linux USB drivers for the host USB controller on the card (the
VIA chip set). I have
I've been thinking along the same lines, i.e. the culprit may be in
USB, not in dvb layers.
On 3/27/07, Chris Johns [EMAIL PROTECTED] wrote:
Juha Ruotsalainen wrote:
I shut down the machine after 38 hours oops-free running. Do you guys
have any idea what has caused this increase in
Hello
Setup: 2 x Technotrend DVB-C 1500, one has CI module connected
Tuning to all channels work fine in 2.6.18.1. I have tried 2.6.20 and
2.6.20.4, czap is not getting lock with channels on 138 Mhz. Other
(higher) frequencies work fine. Anyone have idea what has changed to
cause this
Hi,
I can't seem to get the miniDiseqc to switch to input B with the drivers
included in kernel 2.6.19.
It worked in 2.6.15 with the snapshot from 28 march 2006, but checking
the cvs I don't find anything obvious
that could affect that.
Has anyone else seen this, or have I simply busted the card
I'm having tuning problems with my nova-t 500 and kaffeine.
While doing tuning with AUTO and both positive and negative offsets
checked, kaffeine reports Invalid section length or timeout. I'm
wondering what that means? Kaffeine doesn't report any channels even
though it locks on the signal.
