Hi list,
Am Montag, 16. April 2007 09:59 schrieb Joachim Banzhaf:
Hi list,
I have very unstable video and sound with my nova-s plus, and wonder, if
anyone has the same problem or can help me out?
the quest continues...
I have a system, that works perfectly now.
It's an Intel p4 ~3GHz, HT,
William Davy wrote:
Hi all,
I recently acquired a equinux TubeStick for my Mac which uses the
Afatech AF9015 chipset. It is a fantastic little dongle that has nice
but basic software on Mac OS X and it also works in Windows with the
correct Afatech drivers. However, I would like to get
I have a bttv based card which doesn't work on Bttv/dvb-bt8xx set-up..I want
to try to get it to work with this new driver thus helping with the testing
and potentially adding a new (old) card to the list of supported cards.
I am having a problem in getting to a position where I can compile
I have a KWorld DVB-T 300U (identical to the ADSTech PTV-333) but when I
plug it in I dont get a frontend registered. I was using Ubuntu Edgy
and for 3 or 4 days it worked perfectly, just plugged it in and it
worked. Then it stopped working and nothing seemed to help. I
installed the V4L
At least I now know that it is not just me. Can anyone else throw any light on
this?
Cheers,
Dom
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andreas
Nettsträter
Sent: 11 May 2007 10:09
To: Bryant, Dominic (UK); linux-dvb@linuxtv.org
Subject: Re:
Hi,
i have got a similar problem. I own a DVB-T Twinhan VisionPlus card and
it used to work properly under Debian. But for a few weeks the frontend
cannot be found or installed for this card. I am not able to get the card
back working. Here is the accordingly dmesg output, I am using a 2.6.18
Am Freitag, 11. Mai 2007 09:52 schrieb Mike Booth:
I have a bttv based card which doesn't work on Bttv/dvb-bt8xx set-up..I
want to try to get it to work with this new driver thus helping with the
testing and potentially adding a new (old) card to the list of supported
cards.
I am having a
Am Freitag, 11. Mai 2007 11:09 schrieb Andreas Nettsträter:
Hi,
i have got a similar problem. I own a DVB-T Twinhan VisionPlus card and
it used to work properly under Debian. But for a few weeks the frontend
cannot be found or installed for this card. I am not able to get the card
back
Manu,
any chance to send you some special informations about that theme out of
the forum?
regards
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Am Sonntag, 6. Mai 2007 13:59 schrieb Christoph Pfister:
Hi,
Am Freitag, 4. Mai 2007 23:08 schrieb Albrecht Lohoefener:
Hi,
Could somebody please update the following file in:
/dvb-apps/util/scan/dvb-t/
Regards,
Albrecht
As this file was changed recently (March '07) I'm adding the
Hi
Could someone add this new channel info file to the dvb-apps repository?
thanks
Mick
es-Sevilla
# DVB-T Sevilla (Andalucia)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
T 76200 8MHz 2/3 NONE QAM64 8k 1/4 NONE # Mux 57 RTVE
T 79400 8MHz 2/3 NONE QAM64
Hi all,
I previously posted a patch for v4l-dvb-experimental based on Roger's
work which provided partial support for the Dual Digital 4 in Australia.
After a lot of investigation and experimentation, I have been able to
greatly improve the patch such that it provides the same level of
Hi Daniel,
On 5/11/07, System Administrator [EMAIL PROTECTED] wrote:
Hi all,
I previously posted a patch for v4l-dvb-experimental based on Roger's
work which provided partial support for the Dual Digital 4 in Australia.
After a lot of investigation and experimentation, I have been able to
--- System Administrator [EMAIL PROTECTED] wrote:
I am still experiencing problems with
SBS (UHF channel 36, 585.625MHz) which, as before, could be caused by
either the set_frequency offset or bad signal quality.
Hi Daniel,
Can you confirm you need the extra 125kHz offset from the centre
On 5/12/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
--- System Administrator [EMAIL PROTECTED] wrote:
I am still experiencing problems with
SBS (UHF channel 36, 585.625MHz) which, as before, could be caused by
either the set_frequency offset or bad signal quality.
Hi Daniel,
Can you
Can you confirm you need the extra 125kHz offset from the centre frequency
regarding the specs the different offset is needed for that version of
the firmware.
I'll implement it within the next 1-2 hours though :-)
Markus
Hi Markus,
Is the extra 125kHz offset band specific or
On 5/12/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Can you confirm you need the extra 125kHz offset from the centre frequency
regarding the specs the different offset is needed for that version of
the firmware.
I'll implement it within the next 1-2 hours though :-)
Markus
Hi
On Sat, 2007-05-12 at 03:23 +0200, Markus Rechberger wrote:
Regarding the firmware I believe that
for Australia we should be able to use any xc3028 firmware which will work
with
the board by appending, minus the first byte, my xc3028.au.fw file to the
7MHz
firmware file and using
18 matches
Mail list logo