On 9/26/07, Patrick Boettcher [EMAIL PROTECTED] wrote:
Hi all,
it seems that there still problems related to USB with the latest
firmware.
In order to figure out what is the problem I would like to gather some
information about the affected systems:
Can everyone (people who still have
Typo! I am on the latest firmware, although I listed the wrong one
below :-/.
Now I am getting usb disconnects without the I2C errors too.
On 15 Oct 2007, at 21:14, Nicolas Will wrote:
On Mon, 2007-10-15 at 20:36 +0100, David Harvey wrote:
After recently saying that I had a week of clear
Can anyone point me in the right direction, on how to get this working??
- Original Message -
From: Simon Baxter [EMAIL PROTECTED]
To: linux-dvb@linuxtv.org
Sent: Friday, October 12, 2007 6:49 PM
Subject: [linux-dvb] VDR and pay-per-view on TT-2300 CAM
I have DVB-C and Alphacrypt CAM
Now I have another dmesg output shortly before disconnect, this is
seriously strange considering the length of smooth running before
utter chaos now!
dib0700: RC Query Failed
dvb-usb: error while querying for an remote control event.
.
:-/
On 15 Oct 2007, at 21:14, Nicolas Will wrote:
On
On 10/14/2007 07:54 PM, Oliver Endriss wrote:
Oliver Endriss wrote:
P. van Gaans wrote:
On 10/14/2007 12:11 AM, Oliver Endriss wrote:
P. van Gaans wrote:
Today I was testing some stuff and downloaded and installed the newest
v4l-dvb from hg. After a while I figured out that FTA channels on
On Sun, 2007-10-14 at 19:47 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
On Fri, 2007-10-12 at 02:24 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
I am unfortunately 100% sure that it is caused by the saa7146 driver, as
I have an uptime of over a week now that it is
Ralf Jelinek wrote:
paolo wrote:
hello,
is dvbscan or scandvb working with tt s2-3200? i could not get it
working using latest multiproto or stb0899 (not -c5)... i'll get a lot
of kernel messages and finally get stb0899 get tired (in dmesg)
Francesco Schiavarelli wrote:
Manu Abraham wrote:
I guess it uses FEC short Frames and a Rolloff of 20%.
Currently we use FEC normal frames and a Rolloff of 35%. I will check
on this though.
Do you mean Rolloff and FEC type are somehow hardcoded in current
linuxtv STB0899 driver?
@ all
Reinhard Nissl wrote:
Hi,
video:/var/log # bzcat messages-*.bz2 | cat - messages | grep 'Read
error, Reg' | sed -e 's/.* video kernel: //g' | sort | uniq -c
1 _stb0899_read_reg: Read error, Reg=[0xf000], Status=-121
1 _stb0899_read_reg: Read error, Reg=[0xf000], Status=-5
P. van Gaans wrote:
On 10/14/2007 07:54 PM, Oliver Endriss wrote:
Oliver Endriss wrote:
P. van Gaans wrote:
On 10/14/2007 12:11 AM, Oliver Endriss wrote:
P. van Gaans wrote:
Today I was testing some stuff and downloaded and installed the newest
v4l-dvb from hg. After a while I
Hi,
Konstantin Dimitrov wrote:
about the modprobe problem: what i was tried to explain earlier is
that when i run into that problem i can get rid of it only after 2-3
shutdowns of my computer, i was thinking that my card is dead and then
after the second or third power-up (using the power-up
Hi,
Manu Abraham wrote:
One question to all the folks how are having I2C transaction errors.
Do you have the CI board connected ? If so can you please try the
same _without_ the CI board connected ?
FYI: as you can see from my picture posted earlier in this thread, I do
not have a CI
Hi,
On Mon, Oct 15, 2007 at 11:22:37PM +0200, Artem Makhutov wrote:
Hi,
On Tue, Oct 16, 2007 at 01:18:12AM +0400, Manu Abraham wrote:
[...]
A question here. Is your PCI ID still changing randomly ?
No, it seems to be stable now.
$lspci
02:05.0 0480: 1131:7146 (rev 01)
Reinhard Nissl wrote:
Hi,
Manu Abraham wrote:
One question to all the folks how are having I2C transaction errors.
Do you have the CI board connected ? If so can you please try the
same _without_ the CI board connected ?
FYI: as you can see from my picture posted earlier in this
Artem Makhutov wrote:
Hi,
On Mon, Oct 15, 2007 at 11:22:37PM +0200, Artem Makhutov wrote:
Hi,
On Tue, Oct 16, 2007 at 01:18:12AM +0400, Manu Abraham wrote:
[...]
A question here. Is your PCI ID still changing randomly ?
No, it seems to be stable now.
$lspci
02:05.0 0480: 1131:7146
Hi,
On Tue, Oct 16, 2007 at 09:23:10PM +0200, Marco Schluessler wrote:
Hi Arthem,
Artem please :)
i help you. :-)
thx
Can you show that the modules are loaded?
Can you make after install a depmod -a.
When that not help can you make a modprobe stb6100, modprobe lnbp21
and modprobe
Hi,
I run some tests with the current HG (changeset 5885):
Trying to tune to ProSiebenHD - DVB-S2 100 times:
Failes: 8
Tunes: 92
Trying to tune to ProSieben - DVB-S 100 times:
Failes: 44
Tunes: 56
Trying to tune to Das Erste - DVB-S 100 times:
Failes: 26
Tunes: 74
Trying to tune to RTL
Soeren Sonnenburg wrote:
On Sun, 2007-10-14 at 19:47 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
On Fri, 2007-10-12 at 02:24 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
I am unfortunately 100% sure that it is caused by the saa7146 driver,
as
I have an
Hi,
since there was no reply on the DVB ML:
Is anyone maintaining the DVB part of the saa7134 driver?
Can this patch be accepted?
CU
Oliver
-- Forwarded Message --
Subject: [linux-dvb] [PATCH] Spezial Lifeview DVB-S Card without eeprom
Date: Sunday 14 October 2007 22:12
From:
Am Mittwoch, den 17.10.2007, 02:34 +0200 schrieb Oliver Endriss:
Soeren Sonnenburg wrote:
On Sun, 2007-10-14 at 19:47 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
On Fri, 2007-10-12 at 02:24 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
I am unfortunately 100%
Am Mittwoch, den 17.10.2007, 02:50 +0200 schrieb Oliver Endriss:
Hi,
since there was no reply on the DVB ML:
Is anyone maintaining the DVB part of the saa7134 driver?
Can this patch be accepted?
CU
Oliver
Oliver,
de facto there is no saa713x maintainer anymore since half a year.
We
On Wed, 17 Oct 2007, Oliver Endriss wrote:
since there was no reply on the DVB ML:
Is anyone maintaining the DVB part of the saa7134 driver?
Can this patch be accepted?
It has a few problems:
Is there no sub-system data for this board? It should be added to
saa7134_pci_tbl
#include
On 16/10/2007, at 8:21 PM, Henrik Beckman wrote:
My guess is reception
Yep, I can now confirm reception is a problem. I had almost 2 weeks
of non-stop goodness until the wind and rain picked up here recently
(Melbourne, Australia) and I've now had recordings lost on 2 out of
the last 4
On Wed, 2007-10-17 at 14:45 +1000, Dan Harper wrote:
On 16/10/2007, at 8:21 PM, Henrik Beckman wrote:
My guess is reception
Yep, I can now confirm reception is a problem. I had almost 2 weeks
of non-stop goodness until the wind and rain picked up here recently
(Melbourne, Australia)
24 matches
Mail list logo
