Johann Friedrichs schrieb:
I get no lock on any QAM-256 channel with my C-2300 after applying that
patch.
I've seen two different values for the carrier offset on Windows XP for a
TT-C2300. Registers 20/21h
are programmed with 3c0a or 3ba4 (carrier offset 6763 or 6718). The value
depends on
2007/10/28, e9hack [EMAIL PROTECTED]:
I've seen two different values for the carrier offset on Windows XP for a
TT-C2300. Registers 20/21h
are programmed with 3c0a or 3ba4 (carrier offset 6763 or 6718). The value
depends on the driver
revision. On a TT-C1500, this value is 4000 (carrier
Dual pci Nova-T's, Ubuntu Gutsy.
Just moved house recently, set my machine up and reception was very
poor on a particular multiplex (the itv ch4 one) I assumed I'd need to
rescan as maybe I need to be tuning to a different transmitter now.
Did a full scan with MythTV but still poor reception and
On Wednesday 24 October 2007 16:41, Daniel Golle wrote:
For info I've spotted a newer repo over here http://jusst.de/hg/multiproto/
(spotted in one of manu's mails about multiproto)
but I think the older driver could be better at the moment as with the
newer driver the device doesn't
On Wednesday 24 October 2007 01:42, [EMAIL PROTECTED] wrote:
at this point the results are the same (meter lights up but not much else)
so I can't say if this is better or worse at this point
although I've noticed the LED is staying at orange when it should be going
green in both cases,
Il Thursday 25 October 2007 04:07:19 Hong Yin Lim ha scritto:
Hi,
I've tried to use the following command to capture the TS from a
DVB-C card:
$ dvbstream -f 594000 -s 6875 -0 8192 test.ts
However, I get the follwoing result:
*dvbstream v0.7 - (C) Dave Chapman 2001-2004
**Released
Hi,
Added a VIA usb controller card and attached my TD stick to that instead of
the nforce 430 controller and since it has been 100% stable.
If it´s a bug in any driver or if it´s my hardware that´s bad I don´t know.
/Henrik
___
linux-dvb mailing list
-- Forwarded message --
From: James Fidell [EMAIL PROTECTED]
Date: Oct 28, 2007 12:44 AM
Subject: [mythtv-users] Nova-T 500 musings...
To: Discussion about mythtv [EMAIL PROTECTED]
Anyone else have a Nova-T500 tuner and still getting mt2060 I2C write
errors?
I'm running CentOS5
Hi, I compile d the official repository http://linuxtv.org/hg/v4l-dvb/ on
Ubuntu amd64
em28xx seems to load fine but em2880-dvb won't:
dmesg output is:
[ 951.511747] em28xx v4l2 driver version 0.0.1 loaded
[ 951.511944] usbcore: registered new interface driver em28xx
[ 955.263862]
Hi Oliver, Hartmut
I have to modify my last statement concerning this patch. I forgot that
I had to use a frequency shift in av7110.c to achieve a good reception.
If I set this shift to 0 and use the new value of initial_demod_freq I
get a lock again on QAM256-channels with reception as good as
moro,
Files attached. Is there anything else we should put DVB-H tuning files?
Scan does not handle DVB-H files yet, although those can be used when
changing first letter H to T in tuning file.
I put also Nokia Oulu development network to own file because it is not
public as others. I wonder
You can change the GPIO1 initialisation to 0x02 instead of 0x82.
this will switch the led to green when the frontend gets open()'ed.
To switch it back to orange insert
stb0899_write_reg(state, STB0899_GPIO01CFG, 0x82);
in the stb0899_sleep() function.
(this should be somehow limited to the
On Sun, 28 Oct 2007 10:54:32 +0100, [EMAIL PROTECTED] wrote:
Are you sure you have used the DVB-S2 enabled szap?
Manu posted a link a few days/weeks ago
Currently only the new tuning API does work.
Thanks!
That was the missing piece of the puzzle! By using szap2 I can tune in
and receive all
From: Daniel Golle [EMAIL PROTECTED]
Date: 2007/10/28 Sun PM 03:14:15 GMT
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Pinnacle PCTV Sat HDTV Pro USB (PCTV452e)
On Sun, 28 Oct 2007 10:54:32 +0100, [EMAIL PROTECTED] wrote:
Are you sure you have used the DVB-S2 enabled szap?
Manu
Hi Oliver and Marco,
The patch looked good to me.
Some comments:
IMO, instead of creating an emum for vidmode, I would instead just store
v4l2_std_id there.
if (std-id V4L2_STD_PAL) {
- av7110-vidmode = VIDEO_MODE_PAL;
+ av7110-vidmode =
The attached is the output of running w_scan -x. I found that the file
in /usr/share/dvb/scan/dvb-t/uk-Oxford was incomplete.
--
# #####
## /######
/# / /
I see similar things (on dvb-t) on eg five life and five us, e
specially movies on five us. I assume that the transmission might be in 540
horisontal pixels.
Which channels do you see this on?
I've just uploaded an example where it is easy to see it:
On Sun, 28 Oct 2007 17:24:55 +, [EMAIL PROTECTED] wrote:
Thanks!
That was the missing piece of the puzzle! By using szap2 I can tune
in
and receive all DVB-S channels FTA on 19.2E,
cat dvr0 | mplayer
works almost perfectly; got some glitches from time to time, but
that
was
sorry, posted with a wrong subject before... (shame on me)
On Sun, 28 Oct 2007 17:24:55 +, [EMAIL PROTECTED] wrote:
Thanks!
That was the missing piece of the puzzle! By using szap2 I can tune
in
and receive all DVB-S channels FTA on 19.2E,
cat dvr0 | mplayer
works almost
From: Daniel Golle [EMAIL PROTECTED]
Date: 2007/10/28 Sun PM 09:36:53 GMT
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Pinnacle PCTV Sat HDTV Pro USB (PCTV452e)
sorry, posted with a wrong subject before... (shame on me)
On Sun, 28 Oct 2007 17:24:55 +, [EMAIL PROTECTED] wrote:
On Fri, 21 Sep 2007, Michael Krufky wrote:
Bonne Eggleston wrote:
Hi All,
I just got this device and was able to get the tv section working really
quickly thanks to all your fine efforts.
I'd like to get the remote working, so if there is anything I can do to
help out I'd be glad to.
Greetings,
I have a AverMedia Super 007 DVB-T Card (because my supplier
was out of stock of the card I requested and swapped in this card
instead). I'm running Fedora 6 with MythTV, and I found the
patch to enable this card, did the kernel rebuild etc., but
there are a couple of problems:
- The
Mauro Carvalho Chehab wrote:
Hi Oliver and Marco,
The patch looked good to me.
Some comments:
IMO, instead of creating an emum for vidmode, I would instead just store
v4l2_std_id there.
if (std-id V4L2_STD_PAL) {
- av7110-vidmode = VIDEO_MODE_PAL;
+
23 matches
Mail list logo
