That indeed looks OK to my eyes. I have to admit that I never took a look
into the IR-code from DiBcom...
In any case, especially to that problem with unknown key code I think it
is time to change the IR-behavior of the DVB-USB.
My problem is, I don't know how.
My naive idea would be, that
Hi,
an OpenSource driver is not in sight for that card. There are some NDA
problems... I will see what I can do.
Patrick.
On Sat, 16 Feb 2008, Ali H.M. Hoseini wrote:
On 2/14/08, CityK [EMAIL PROTECTED] wrote:
Ali H.M. Hoseini wrote:
Hi,
I searched linuxtv.org http://linuxtv.org/
Hi,
On Tue, 19 Feb 2008, Nicolas Will wrote:
I would suggest creating a netlink device which lircd (or similar) can
read from.
Be ready to discount my opinion, I'm not too good at those things.
Wouldn't going away from an event interface kill a possible direct link
between the remote and
Aah now I remember that issue, in fact it is no issue. I was seeing that
problem when send the sleep command or any other firmware command without
having a firmware running. In was, so far, no problem.
Patrick.
On Fri, 15 Feb 2008, Holger Dehnhardt wrote:
Hi Albert, Hi Mauro,
I have
For the DiB7000 the code I sent is requiring a 5.2 IF firmware.
Although it should be possible to recover an offset of 200kHz I would
recommend to use this firmware.
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Fri, 15 Feb 2008, Mauro Carvalho
The latest dib0700-firwmare is dvb-usb-dib0700-1.10.fw not
dvb-usb-dib0700-03-pre1.fw.
Patrick.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Acked-By: Patrick Boettcher [EMAIL PROTECTED]
Patrick.
On Thu, 7 Feb 2008, Hartmut Hackmann wrote:
So here is the patch that make the the 22kHz tone a config option.
Please be aware that i have no means to test it, so please report
Signed-off-by: Hartmut Hackmann [EMAIL PROTECTED
Hi,
On Sun, 3 Feb 2008, Bodo Eggert wrote:
Roel Kluin [EMAIL PROTECTED] wrote:
'!' has a higher priority than '': bitanding has no effect.
+++ b/drivers/media/video/tvaudio.c
@@ -1571,14 +1571,14 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip,
ctrl-value=chip-muted;
On Wed, 30 Jan 2008, Jonas Anden wrote:
If you're not going to use the sensor, disable the RC polling by
adding the following line to your modprobe.conf:
options dvb_usb disable_rc_polling=1
That's a cleaner solution in my opinion.
That one is for the wiki.
Is there
Hi Hartmut,
On Mon, 28 Jan 2008, Hartmut Hackmann wrote:
As Hartmut is saying in his email: I need to check whether this pach is
valid for all combinations of chips. - the answer is no ;)
please help,
Patrick.
This bit defines whether the chip provides a modulated 22kHz signal or
Hi,
On Wed, 30 Jan 2008, Hartmut Hackmann wrote:
If i understand the LNBp21 and isl64xx datasheets correctly, these chips
will
always use their internal 22kHz oscillator, it can just be turned on and
off.
I don't see how to turn on 22kHz on LNBP21. How can this be done?
Hi,
In
http://www.linuxtv.org/pipermail/linux-dvb/2007-June/018757.html
there is a patch which breaks support for the Pinnacle 400e USB device.
I just updated yesterday to the head of hg and noticed that it wasn't
working anymore.
I tracked all patches since I had a working version up to
I adapted you change to all other dibcom-demods.
Thanks,
Patrick.
On Mon, 21 Jan 2008, Soeren Moch wrote:
Hello!
The attached patch solves all my vdr tuning problems on a dib7000p
nova-t stick as far as I could check within the last weekend.
Perhaps this patch can also help
Hi Mauro,
Can you please pull from
http://linuxtv.org/hg/~pb/v4l-dvb/
for a bunch of changes for DiBcom-based hardware.
All users, can you please test, whether I broke something committing all
of that.
Thanks to everyone who contributed to improved device-quality and
support.
best
replying, please edit your Subject line so it is more specific
than Re: Contents of linux-dvb digest...
Today's Topics:
1. PULL request for a bunch of DiBcom-based changes
(Patrick Boettcher)
2. Re: dib7000p tuning problem solved (Patrick Boettcher
Hi Ivor,
how sure are you that really the new firmware was downloaded?
It is not possible to download another firmware, once a firwmare was
downloaded. Meaning you cannot stop the firmware running already, it will
simply continue to run. When the new firmware downloaded is only slightly
Hi Albert,
On Wed, 16 Jan 2008, Albert Comerma wrote:
Hi, I would like to build a driver for Pinacle 320CX card based on this
chips combination, I already managed to get the card detected and firmware
downloaded to dibcom chip.
For dvb CX25843 is useless, so it can be skiped, but the problem
Hi all,
all of you have either contacted me directly or written an email to the
linux-dvb-list about the SkyStar2 rev.27.
All I can say is, I started some time ago with porting the itd1000-driver
to linux-dvb and stopped after having some troubles which lead to
rebooting the PC each time
Hi all,
I'm not sure whether the patch to make this board initially work has be
sent to the list or not:
In fact it is not yet a patch:
In dib0700_device.c in function stk7070p_frontend_attach change:
dib0700_set_gpio(adap-dev, GPIO6, GPIO_OUT, 1);
to
Hi all,
The new year starts well, maybe: We found something which was in our
drivers from the beginning and nobody saw it. See attached.
I'm not sure whether it fixes something, but it might be possible. Can
everyone try it please?
Patrick.
On Tue, 8 Jan 2008, Nicolas Will wrote:
On Tue,
on the problem channel is worse, if it´s any help to anyone just
specify what tests you need and I will try to deliver.
/Henrik
On Jan 8, 2008 10:52 AM, Paul Elliott [EMAIL PROTECTED] wrote:
Hi Patrick,
On 08/01/2008, Patrick Boettcher [EMAIL PROTECTED] wrote:
The new year
:
Patrick Boettcher wrote:
It affects all dib0700-based devices.
Patrick.
I hoped this patch would solve my Nova-T-Stick problems, but - when
looking
closer - this patch changes nothing for single-channel dib0700-based
devices (like the Nova-T-Stick), or have I missed the point
On Fri, 14 Dec 2007, Jesper Taxbøl wrote:
I tried applying the changes mentioned in this thread:
http://www.linuxtv.org/pipermail/linux-dvb/2007-December/022181.html
It works, and I can tune channels.But, my problem is that the signal
quality is poor. I keep getting square artifacts in the
If Tomi sends the patch against a recent v4l-dvb hg checkout with a
signed-off-by-line, I think we could integrated it. (I think it could be
useful to have a diffstat output at the some time - including the removal
of the cinergyT2-driver.)
Patrick.
On Fri, 7 Dec 2007, Tino Keitel wrote:
Hi all,
did someone started to write a driver for that device combination for
LinuxTV?
I'm about to start that, but maybe it is already done ;)
regards,
Patrick.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
It is most likely no mt2060-based device, but DiB7070P-based (Tuner+Demod
in a package). Funny that Hauppauge chose 0x7070 as Product ID ;).
In the latest drivers there is preliminary support for that device in
dib0700_device.c try to add the device ID of your card in
stk7070p-section.
, Sebastian wrote:
Hey guys, you ROCK!!!
Am Sonntag, den 02.12.2007, 18:43 +0100 schrieb Patrick Boettcher:
It is most likely no mt2060-based device, but DiB7070P-based (Tuner
+Demod
in a package). Funny that Hauppauge chose 0x7070 as Product ID ;).
In the latest drivers
On Sun, 2 Dec 2007, Yousef Lamlum wrote:
Nice one. I did much the same as you a couple of weeks ago to get my
Artec T14BR working.
Patrick, what is the process for adding these patches to the main
repository? I submitted my patches a week or two back and am yet to see
them added to the main
Hi Craig,
How did you integrate the IDs ? Can you send the output of hg diff ?
Patrick.
On Wed, 28 Nov 2007, Craig Hair wrote:
Hi all,
I just wanted to ask if the new Compro U500 device ID could be
properly added to the source as I am having trouble getting it to work
by just changing the
There are several patches mixed. For some I have the signed-off-by-line
for some not.
Can you resent your patch with a Signed-off-by-line or point me to the
Emails in the list-archives in case I missed it?
I only have: Re: [linux-dvb] Artec T14BR patches (was Adding patches to
main
Hi Yousef,
Thanks for your patch. But something is wrong with it. There is a -
where there should be a +
I think you create the patch wrongly: correct should be:
patch -ur(other options) old_directory new_directory
Can you please send it again?
Don't forget your Signed-off-by-line like that:
On Thu, 22 Nov 2007, CityK wrote:
You two are guilty of multiple infractions of top posting. As
punishment for this crime, I sentence you both to run your email clients
for two weeks without any sort of spam filtering. ;) In future,
please don't top post as it makes reading continuity
Hi again,
DiB7000PC is the DVB-T demodulator, DiB0070 is the RF tuner. They are put
into one package which is called DiB7070P.
On Thu, 22 Nov 2007, Yousef Lamlum wrote:
My DVB device (Artec T14BR) uses the DiBcom 7070P frontend, however
v4l-dvb is reporting the device as being based on a
On Tue, 20 Nov 2007, Tomas Blaha wrote:
However nowadays, different version called 2001e is saled under the same
name. (On the official pages there is even newer version showed with dark
case.)
Hi Thierry,
unfortunately it is not possible to re-download a firmware after having a
firmware downloaded with dib0700 (currently).
The only way is to replug the device (which is hard on the Nova T 500).
Patrick.
On Wed, 14 Nov 2007, Thierry Lelegard wrote:
Hello,
This has already been
Hi all,
the driver is already merged inside the main v4l-dvb. Except that the USB
IDs are not the same. (I'm refering to your previous email saying the PID
is 0x0233 - whereas the one of the device I had was 0x228 and it was
called DVB-T Flash).
To give it a try, just go the dib0700_devices.c
Hi,
I don't know anything about this device. Maybe it uses the bcm3510-demod
in this case it could work with the flexcop-driver. But also this means
that there is only USB1.1 support (useful bitrate less than 8MBit/s with
Airstar DVB-T).
sorry for the late answer, though I HTH.
Patrick.
--
Hi,
I know it is very late, but
Thanks, committed.
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Sat, 8 Sep 2007, Jaroslav Barton wrote:
Add remote controller support for Leadtek Winfast DTV Dongle based on
DiB7700P, MT2060 and using last
Merci, committed.
Patrick.
On Tue, 6 Nov 2007, dominik wrote:
Sorry for spamming and replying in the wrong place,
I did forget the attached file
@+
dom
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Hi Alexander,
I was starting in 2006 to write a driver the SS2 Rev 2.7A. I'm not sure
how much different the V-version is, but all my work so far can be found
here: http://linuxtv.org/hg/~pb/v4l-dvb.skystar2.rev27/
I'm also having a driver source from BBTI (from 2005) (the software
that the Starbox one
displays the model as 7021 while the Starbox II shows 7021A. Not sure
how accurate that is.
Thanks again, I'll go get a Starbox II then.
Greg
On Nov 2, 2007 11:01 AM, Patrick Boettcher patrick.boettcher at
desy.de wrote:
There are two versions
Hi,
On Tue, 6 Nov 2007, Nicolas Will wrote:
On Wed, 2007-09-26 at 11:42 +0200, Patrick Boettcher wrote:
Hi all,
it seems that there still problems related to USB with the latest
firmware.
In order to figure out what is the problem I would like to gather some
information about
the model as 7021 while the Starbox II shows 7021A. Not sure
how accurate that is.
Thanks again, I'll go get a Starbox II then.
Greg
On Nov 2, 2007 11:01 AM, Patrick Boettcher patrick.boettcher at
desy.de wrote:
There are two versions.
Only the StarBox2 is supported
In my hg repository the patch is committed. Due to time limitations I
could not prepare it for 2.6.24 ... sorry.
Patrick.
On Sat, 3 Nov 2007, Michael Baudinne wrote:
Namaste,
I have a Nova-TD usb stick on Debian Etch with the latest hg v4l-dvb
tree compiled against the backports kernel
There are two versions.
Only the StarBox2 is supported. There is no way (at least I don't know it)
to figure out whether you have a 2 or a 1.
If it it does not work I guess you have a StarBox1.
Patrick.
On Fri, 2 Nov 2007, Greg Suarez wrote:
Which kernel version are you using? I'm
Hello,
As you have received a development board from DiBcom you most likely have
a contact at DiBcom. Try to ask them to have a driver (for windows at
least).
The DiB7070M can be used in Linux with v4l-dvb but not without some work.
Have a look at dib0700_devices.c to find how the DiB7070P is
Have you tried the latest drivers from v4l-dvb? People are reporting that
everything works better with it.
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Sat, 13 Oct 2007, ludovic pollet wrote:
Hello,
I use the dib3000mc driver my a LITE-ON USB
Hi Ole,
On Thu, 11 Oct 2007, Ole wrote:
cat /dev/dvb/adapter0/dvr0 test.mpg (while tzap -r is running)
will give me a zero sized file.
status 0b | signal 234e | snr | ber 001f | unc |
status 1b | signal 21e5 | snr | ber 001f | unc | FE_HAS_LOCK
status 1b
Hi,
I think there is support for this device since August 2007 .
Did you try the latest v4l-dvb?
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Fri, 21 Sep 2007, [EMAIL PROTECTED] wrote:
Hi,
is anybody working on support for pinnacle 280e
On Thu, 4 Oct 2007, Henrik Beckman wrote:
Hi,
I´ve posted some yesterday and I´ve done some more poking around and it just
doesn´t find any signal in linux
I´ve tried with two different antenna feeds who both works with windows, if
I spilt my primary feed I can still run the t-500 PCI card
Hi all,
it seems that there still problems related to USB with the latest
firmware.
In order to figure out what is the problem I would like to gather some
information about the affected systems:
Can everyone (people who still have the disconnects and the ones who
don't) please reply directly
Hi,
On Tue, 18 Sep 2007, Wolfgang Wegner wrote:
On Tue, Sep 18, 2007 at 11:35:31PM +0200, Patrick Boettcher wrote:
I don't understand your conclusion.
sorry, probably my wording was all wrong.
Try this doc
http://www.dvb.org/(RoxenUserID=cc5cd761bc596bbccaf4820a0a017e74
Hi Simon,
On Tue, 18 Sep 2007, Simon Farnsworth wrote:
I have no datasheet for the tda10046, so I don't know whether the code
is right, or the caps setting was right. I'm assuming the caps setting
is wrong, since the driver works with HIERARCHY_AUTO and has code to
support it; however, none
On Tue, 18 Sep 2007, Wolfgang Wegner wrote:
Hi Patrick,
On Tue, Sep 18, 2007 at 04:36:33PM +0200, Patrick Boettcher wrote:
Hi Simon,
And even if they would be hierarchically transmitted, it would not be
possible to receive them: The LinuxTV API as of today is not capable
Hi again,
On Tue, 18 Sep 2007, Wolfgang Wegner wrote:
Each stream is a standalone MPEG2 transport stream. So if hierarchy is
used, the user has to select the stream he wants.
Thank you, although this sounds really unlogical to me, because I always
thought this was targeted at
Hi all,
Some time has gone by and there have been some fixes.
Can everyone please try the latest firmware from
http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-1.10.fw
?
Don't forget to either change the referring firmware filename in
dib0700_devices.c or
On Mon, 10 Sep 2007, Nicolas Will wrote:
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote:
Some time has gone by and there have been some fixes.
Can everyone please try the latest firmware from
http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb
On Mon, 10 Sep 2007, Maillist wrote:
Hi all,
Some time has gone by and there have been some fixes.
Can everyone please try the latest firmware from
http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-1.10.fw
?
Don't forget to either change the
Hi Tomi,
On Sat, 8 Sep 2007, Tomi Orava wrote:
I've had quite a lot of problems with the existing Cinergy T2-driver
(keyboard hangs sooner or later). Therefore I've converted the existing
driver to use dvb-usb framework as used in the vp7045-driver. The current
version of the converted
Hi,
On Fri, 31 Aug 2007, zhenhao huang wrote:
* * I had been trying to work with demod board ,but i haven't been able to
communicate
with the part of tuner,so anyone can advice me how to set demodulator i2c
interface in
bridge mode.
Here is our platform i2c write mode.
Write mode
The Linux-DVB API is currently not able to handle ISDB-T . I.e. there is
no userspace application which could talk (correctly) to a device.
Furthermore there is no device-driver yet there which could lock on a
ISDB-T signal.
But starting the discussion on that, would be a great idea:
Committed, thanks.
I will ask Mauro to pull it to main, soon.
Patrick.
On Sun, 5 Aug 2007, Alan Nisota wrote:
I've been pretty lax with this, and there are now 4 different versions of the
GENPIX USB adapter. The newest 'Skywalker' models are fully self-contained,
and need no additional
Committed, thanks.
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Wed, 1 Aug 2007, Darren Salt wrote:
Signed-off-by: Darren Salt [EMAIL PROTECTED]
diff -r ad9b95d2aac4 linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
---
Committed, thanks.
Patrick.
On Wed, 1 Aug 2007, Darren Salt wrote:
k
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Working with my Nova-T Stick (70001) with remote control model A415.
Untested with other dib0700m/dib0700p devices.
Signed-off-by: Darren Salt [EMAIL
Committed, thanks.
Patrick.
On Wed, 15 Aug 2007, Michael Mauch wrote:
Hi,
modinfo dvb-usb shows incomplete/mixed parameter descriptions:
parm: force_pid_filter_usage:int
parm: disable_rc_polling:force all dvb-usb-devices to use a PID
filter, if any (default:
Hi,
On Wed, 1 Aug 2007, lwtbenben wrote:
?2007-07-31,Patrick Boettcher [EMAIL PROTECTED] ??:
Just use hg clone http://linuxtv.org/hg/v4l-dvb
and you will get the complete /media tree for compilation outside the
kernel.
Yeah, I tried this and it can compile correctly.
But what should I do
On Wed, 1 Aug 2007, Christophe Thommeret wrote:
Le lundi 30 juillet 2007 22:04, Patrick Boettcher a écrit :
Args, stupid mistake.
It should be fixed (w/o warranty)!
Patrick.
Hi Patrick,
I've tried this new firmware with my nova-t stick (DiBcom 7000MA/MB/PA/PB/MC).
kernel
, but I can see a new module parameter there.
Thanks,
Matt
Patrick Boettcher wrote:
Hi Matt,
Based on your Idea I just committed something which will fix your problems
using a module parameter.
I don't know why Hauppauge has splitted the fix into two, it is not useful,
both
Yes.
Nova-T 500 is having a real USB2.0 controller on-board
Patrick.
On Tue, 31 Jul 2007, Markus Ingalsuo wrote:
Is the Nova-T 500 capable of passing the whole transport stream through
it's USB controller? According to the wiki the controller is a USB 1.1
device and if I can recall, 1.1
That sounds like music in my ears.
But you reported that one kind of hardware was not working anymore? Which
one was it again?
Patrick.
On Tue, 31 Jul 2007, Soeren Moch wrote:
Patrick Boettcher wrote:
Can you please try the following?
http://www.linuxtv.org/pipermail/linux-dvb/2007
On Tue, 31 Jul 2007, Torgeir Veimo wrote:
Is the diversity feature (using two tuners to get better reception than
one) a hardware feature, or is it simply a software feature?
It is a hardware feature. The diversity combination is done per
carrier transferred on a dedicated bus between the
Just use
hg clone http://linuxtv.org/hg/v4l-dvb
and you will get the complete /media tree for compilation outside the
kernel.
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Tue, 31 Jul 2007, lwtbenben wrote:
I want to compile the dvb-usb-cxusb
On Mon, 30 Jul 2007, Darren Salt wrote:
No still problems here... oh, did you mean still have problems? ;-)
My German/French/English-mess in my brain is comming through
Hardware is a Nova-T Stick 70001.
The new firmware is in /lib/firmware as both dvb-usb-dib0700-01.fw and
On Tue, 31 Jul 2007, Soeren Sonnenburg wrote:
On Tue, 2007-07-31 at 12:10 +0200, Patrick Boettcher wrote:
That sounds like music in my ears.
But you reported that one kind of hardware was not working anymore? Which
one was it again?
err stop, that was me. not to be mixed up
OK,
I found a bug which affected the dib7000m-driver, please try again.
Patrick.
On Tue, 31 Jul 2007, Patrick Boettcher wrote:
On Tue, 31 Jul 2007, Soeren Sonnenburg wrote:
On Tue, 2007-07-31 at 12:10 +0200, Patrick Boettcher wrote:
That sounds like music in my ears.
But you
Thanks. Committed.
Patrick.
On Tue, 31 Jul 2007, Matt Doran wrote:
Hi Patrick,
No wonder I was confused. :)
I haven't had a chance to test yet and it mostly looks good. However you've
got a copypaste bug in the module param description for both the dib3000mc
and the dib7000p. See
Hi all,
I just asked Mauro to pull all my changes regarding the dib0700-based
device into the main repository.
I'm quite happy with the results I already received and to reach more
users before the next kernel integration I think it should be merged.
The dib0700-firmware seems to be OK -
Dear all,
In case you are owning a DiB7070P-based design:
- STK7070P or STK7070PD DiBcom reference design
- Pinnacle PCTV Dual DVB-T Diversity Stick
- Pinnacle PCTV DVB-T Flash Stick
Can you please try http://linuxtv.org/hg/~pb/v4l-dvb/ to see whether
it works properly or not and report?
I did
Dear all,
Can all of you using a dib0700-based-design with problem please try the
following firmware
http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-03-pre1.fw
and the latest drivers from
http://linuxtv.org/hg/~pb/v4l-dvb/
to see whether you have still
. It
has two coaxial inputs at the back so it can strengthen weak signals.
They call this the diversity feature. The existing drivers for the
Nova-T 500 don't work, they must have changed the chip or something.
On Sun, 2007-07-29 at 17:08 +0200, Patrick Boettcher wrote:
Are you sure the device
On Mon, 30 Jul 2007, Nicolas Will wrote:
How should we go about this?
Would this be OK?
$ hg clone http://linuxtv.org/hg/~pb/v4l-dvb/
Yes.
I can, given a test procedure.
What sort of problems are we talking about?
Disconnects?
Scanning?
Is the remote stuff in there?
I committed those two patches into my repository:
http://linuxtv.org/pipermail/linux-dvb/2007-July/019349.html
I will ask Mauro to pull it to main later.
Thanks for your patches,
Patrick.
On Mon, 30 Jul 2007, Nicolas Will wrote:
All right.
Anybody has issues about this? Corrections?
It is supported now using my repository:
http://linuxtv.org/hg/~pb/v4l-dvb/
Though the diversity feature is not working yet, but you can use the card
as a dual-tuner one.
Patrick.
On Wed, 27 Jun 2007, Tobias Stoeber wrote:
Hi,
does anyone know,whether the Pinnacle PCTV DUAL DVB-T
Can you please try the following?
http://www.linuxtv.org/pipermail/linux-dvb/2007-July/019368.html
And report whether it works or not?
Patrick.
On Mon, 4 Jun 2007, Soeren Moch wrote:
Last week I bought a Hauppauge Nova-T Stick, which is almost unusable
with vdr.
USB-IDs of Stick:
this patch? Does it look right?
I wasn't sure what to call the module option, or how to describe the options
... if you have any suggestions I'd be happy to adjust the patch.
Regards,
Matt
Patrick Boettcher wrote:
Hi,
I nothing really important happens I'm trying to provide
let me
know :)
Cheers,
Mike
Patrick Boettcher wrote:
Hi,
It seems that there will be some time that can be spent on linux-dvb in the
close future. Just be patient.
best regards,
Patrick.
___
linux-dvb mailing list
linux
Args, stupid mistake.
It should be fixed (w/o warranty)!
Patrick.
--
Mail: [EMAIL PROTECTED]
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Mon, 30 Jul 2007, Nicolas Will wrote:
On Mon, 2007-07-30 at 18:30 +0200, Patrick Boettcher wrote:
Dear all,
Can all of you using
On Mon, 30 Jul 2007, Janne Grunau wrote:
On Monday 30 July 2007 18:35:18 Patrick Boettcher wrote:
If you have such a card we can try to make it work.
There are already cards out there. Hauppauge official name seems to be
Nova-TD 500
We need to know
which components are used
Are you sure the device carries the name Nova-T 500 Diversity?
Patrick.
On Sun, 29 Jul 2007, D McNally wrote:
Are drivers for the diversity model of Hauppauge Nova-T 500 being
developed? If so, when can we expect them?
Dave
___
linux-dvb
Based on the idea of a previous report, we were able to reproduce the
problem (at least for the STK7700P (DiB7700 + MT2060)).
It seems we have a partial solution. Tomorrow I will try to make a new
firwmare release. It would be nice, if you all can test whether it
improves the disconnect
On Fri, 27 Jul 2007, lwtbenben wrote:
Thank you for ur advice but do we have any material which describes these
dvb_usb about data structures?
No.
Are you joking?
This *IS* linux.
You're expecting NCC-1701-ready docs? Come on.
I do not expect that, but I just want to know what is
On Fri, 27 Jul 2007, lwtbenben wrote:
In dvb-usb-dvb.c, where we want to register our frontend to the DVB core,
we have these condition checked;
if (adap-props.frontend_attach(adap) == 0 adap-fe != NULL)
I think this was just done to do a santiy check whether the
On Fri, 27 Jul 2007, lwtbenben wrote:
?2007-07-27,Patrick Boettcher [EMAIL PROTECTED] ??: On Fri, 27
This field gives the size of the buffer to be allocated by the
data-transfer part of dvb-usb per URB.
Depending on your USB-controller or its firmware this value can vary. You
can try 4096
On Fri, 27 Jul 2007, lwtbenben wrote:
if (adap-props.frontend_attach(adap) == 0 adap-fe != NULL)
When the first condition is checked, my_own_frontend_attach() function is
called, using dvb_attach() macro to gain the adap-fe pointer, in my driver
it is successful.
But my driver
Hi,
I'm planning to work on an updated release of the dib7000-drivers during
this week and next week. (still there is no solution for the
dib0700-problems)
Can you send some good patches with Signed-Off-By - so that we can
include it in the mainstream?
Patrick.
On Mon, 16 Jul 2007, [EMAIL
/linux-dvb/2007-April/017065.html).
Patrick Boettcher indicated that it relates to some peculiarities with
the DVB broadcast
(http://www.linuxtv.org/pipermail/linux-dvb/2007-April/017102.html).
The Hauppauge windows drivers now have a registry key
(HKEY_LOCAL_MACHINE\System
On Mon, 11 Jun 2007, Soeren Moch wrote:
Patrick Boettcher wrote:
Hi,
The biggest problem is, that we have no time to investigate the issue
and
it is no problem on the Windows-platform (because of a different call
sequence).
It has nothing to with the I2C-gating used
It is _no_ hardware restriction.
The symptoms described by Soeren is correct, but the conclusion is wrong.
In fact this behaviour seems to be specific to the open source driver, we
don't have this problem in our reference driver.
If I only would have time, I would take a look.
Did you try
the problem.
I filed the problem to the correct guys at DiBcom - they will see (sooner
or later).
Sorry,
Patrick.
On Thu, 7 Jun 2007, Soeren Moch wrote:
Hello Patrick!
Patrick Boettcher wrote:
It is _no_ hardware restriction.
The symptoms described by Soeren is correct
Hi
can you please send your Signed-off-by-line so that we can accept the
patch.
thanks,
Patrick.
On Mon, 30 Apr 2007, pat-lkml wrote:
Having used this patch against multiple kernels starting at 2.6.17, and
having shared it with others and they have all had success, I would like
to see it
1 - 100 of 251 matches
Mail list logo