Many thanks Jan. I have never managed to tune to all my four frequencies
before. 554 was ok, 530 and 586 were unstable and 570 didn't work at all.
With this extra register write all four tune on my laptop with 2.6.19.
#Jonkoping- Sweden
T 58600 8MHz 2/3 NONE QAM64 8k 1/8 NONE
T 55400
Magnus Hörlin wrote:
Many thanks Jan. I have never managed to tune to all my four frequencies
before. 554 was ok, 530 and 586 were unstable and 570 didn't work at all.
With this extra register write all four tune on my laptop with 2.6.19.
#Jonkoping- Sweden
T 58600 8MHz 2/3 NONE QAM64 8k
On Sun, 21 Jan 2007 16:11:21 -0500
Michael Krufky [EMAIL PROTECTED] wrote:
I believe that as of today, I´ve caught up on all of the pending
changesets to the megasky tree.
Please test the two following trees to confirm proper operation:
http://linuxtv.org/hg/~mkrufky/megasky(expected
Aapo Tahkola wrote:
I actually tested both trees until realizing differences between
them didn't weren't related my stick. :)
I am going to shuffle some patches around, and set things such that I
can merge m920x while holding gl861 and au6610 behind until we can
resolve the issue with that
On Tue, 23 Jan 2007 21:13:34 +0200
Antti Palosaari [EMAIL PROTECTED] wrote:
heissan,
moro
Aapo Tahkola wrote:
This patch fixes USB1.1 support.
Antti, You can test this by removing ehci_hcd driver.
But I don't have m9206 stick... Removing ehci_hcd drops USB 2.0 =
1.1?
Yep. I saw
On Tue, 23 Jan 2007 14:35:02 -0500
Michael Krufky [EMAIL PROTECTED] wrote:
Aapo Tahkola wrote:
I actually tested both trees until realizing differences between
them didn't weren't related my stick. :)
I am going to shuffle some patches around, and set things such
that I can merge
heippa!
here comes test report:
HW: Megasky GL861 and Sigmatek DVB-110 au6610.
freqs: fi-Oulu
Note: My Megasky gives following errors kernel: zl10353_read_register:
readreg error (reg=8, ret==0). This only happens my 'fast' (Athlon X2
3800+) computer, not in older and slower laptop. I checked
