Just to clarify, the diseqc switches mentioned do not work reliably
with any of the D-Sat cards in my PC (one Skystar HD2 DVB-S/DVB-S2,
three Skystar 2 (DVB-S only)), the VP-1041 driver is not the issue -
it was best to remove the switch as they can be troublesome, in my
case they tend to
Simeon,
It doesn't matter re: the diseqc commands, with no switch present will
be nothing listening, assuming there is nothing else connected such as
a rotor.
Tim.
On 8 Mar 2008, at 01:27, Simeon Simeonov wrote:
Thanks for the answer Tim!
That's a good point - I do have a switch. I
Tim Hewett wrote:
Simeon,
It doesn't matter re: the diseqc commands, with no switch present will
be nothing listening, assuming there is nothing else connected such as
a rotor.
The SEC equipment should work fine AFAICS. The bad aspect of the tests
were that no one really came up with
Hi,
I am curious to find out if anybody is able to use Twinhan/Azurware VP-1041 with
the mantis drivers to tune to standards other than DVBS - DVBS2 and DSS?
Thanks,
Simeon
Looking for last minute
Yes, I have the Skystar HD2 tuning to DVB-S2 transponders using the
replacement szap.c mentioned on the wiki page, then listing the
channels using 'scan -c -a n' to prove proper reception, all using
the current mantis tree. No hacks were needed, it works out of the box
every time now that
Thanks for the answer Tim!
That's a good point - I do have a switch. I will try bypassing it but
do you still send the diseqc commands or I have to get rid of them?
Simeon
- Original Message
From: Tim Hewett [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Tim Hewett [EMAIL PROTECTED];
