Am Dienstag, den 13.11.2007, 15:49 +0800 schrieb kevin liu:
Dear everyone:
How could I use mplayer to play my composite tv program.
I use this command mplayer tv:// -tv
driver=v4l2:device=/dev/video0:norm=NTSC:noaudio
Seems no result.
:-(
Hi,
look at what mplayer prints
Hi!
I noticed that a few commits concerning tuner xc3028 have started to be
done in the mercurial tree. Is the support for this tuner already usable
(at least for testing purposes)?
One month ago I was told in this mailing list that you were still
working on the firmware part but apart from that
Hi all,
I tried to run the af9015 driver from http://jusst.de/hg/af901x/ on the
A-Link DTU (m) dongle (USB ID 15a4:9016). The firmware seems to load
fine, but there are a few errors from mt2060, after which the driver
apparently tries to reload the firmware. Running dvbscan with the
fi-Espoo
Hi,
On Tuesday 13 November 2007 10:34:40 aldebaran wrote:
I noticed that a few commits concerning tuner xc3028 have started to be
done in the mercurial tree. Is the support for this tuner already usable
(at least for testing purposes)?
One month ago I was told in this mailing list that you
On 11/13/07, aldebaran [EMAIL PROTECTED] wrote:
Hi!
I noticed that a few commits concerning tuner xc3028 have started to be
done in the mercurial tree. Is the support for this tuner already usable
(at least for testing purposes)?
One month ago I was told in this mailing list that you were
I've been going through the code for the gnutv app and the libdvbapi. It
looks like the way that a demux and output method is set up is that a
filter structure is created including the tuning information, output
method and pids to demux/decode. Now it seems that there is only
enumerated values
I have a Hauppauge Nova-S-Plus DVB-S I am having an
issue where by when I attempt to do an initial scan a
transponder I am unable to tune to this transponder.
I am reasonably sure that the transponder is accurate
and my dish is aimed I can get this tp on my fta
receiver When I use kaffeine it
Hi,
Is there a chance to grab the audio out and play it over a std soundcard?
The old wintv pci cards had such a alsa module and I could get audio stream
without connecting the two cards with an audio cable.
Any chance to get this working?
Thanks
Halim
--
Halim Sahin
E-Mail:
On 11/13/07, Markus Rechberger [EMAIL PROTECTED] wrote:
On 11/13/07, aldebaran [EMAIL PROTECTED] wrote:
Hi!
I noticed that a few commits concerning tuner xc3028 have started to be
done in the mercurial tree. Is the support for this tuner already usable
(at least for testing purposes)?
On 11/13/07, James Klaas [EMAIL PROTECTED] wrote:
On 11/13/07, Markus Rechberger [EMAIL PROTECTED] wrote:
On 11/13/07, aldebaran [EMAIL PROTECTED] wrote:
Hi!
I noticed that a few commits concerning tuner xc3028 have started to be
done in the mercurial tree. Is the support for this
Hello, guys.
Can anybody recommend PCI card, working with ATSC standard and with v4l?
Ideally, it must do all that can for example TT-1500.
thank you for you time
PS. sorry if my question is incorrect, I am trying to understand how all
this stuff works.
--
Anton P. Linevich
I thank you very much for your quick reply Michel, Markus and Mauro!!
Here are some updates:
@Markus
Thank you for your reply!
I tried installing your v4l branch following the steps you provided me
in http://mcentral.de/wiki/index.php/Em2880#Installation and all went
fine, except that the card
moikka
known problems... we are working for fix this. Current situation of this
driver is that i2c-bus implementation is broken. And I like that current
implementation is far too complex too :) Communication is done just
sending BULK packet to EP2 and after that receive reply from EP1 like
Hi,
It's worth pointing out the current state of the HVR1500 support under
Linux.
1. None of it's functions are currently supported, they are awaiting a
xc3028 driver change. I have some patchsets which will add support, but
they reply on the xc3028 change.
Based on an IRC discussion, Mauro
On Nov 13, 2007 11:16 AM, aldebaran [EMAIL PROTECTED] wrote:
I thank you very much for your quick reply Michel, Markus and Mauro!!
[snip]
[ 789.484000] cx23885 driver version 0.0.1 loaded
[ 789.484000] ACPI: PCI Interrupt :04:00.0[A] - GSI 17 (level, low)
- IRQ 17
[ 789.484000]
On 13/11/2007, Darren Salt [EMAIL PROTECTED] wrote:
[relevant context restored]
I demand that Simeon Walker may or may not have written...
I demand that Simeon Walker may or may not have written...
Can anyone tell me about the different versions of the Nova-T USB Stick?
I see the model
Michel Ludwig wrote:
Hi Steven,
On Tuesday 13 November 2007 17:20:56 you wrote:
It's worth pointing out the current state of the HVR1500 support under
Linux.
1. None of it's functions are currently supported, they are awaiting a
xc3028 driver change. I have some patchsets which will add
There are some bugs that prevent working of remote control with
Hauppauge HVR1300 cards. I don't know what a convention for submitting
bugs and patches here, so i simply post to mailing list.
First, there is missing break statement in probe of Z8F0811 controller
in ir-kbd-i2c.c in function
I demand that Simeon Walker may or may not have written...
[snip]
Ok, I have the stick now and it looks like it should work. It's in a
plain white box labelled:
MODEL 99063-001
WINTV-NOVA-T-STICK-LITE
On the back of the it says:
M/R: 70009/C1B5 #4906
That's good enough; I've added it to
Swap the cards.
- If the errors moves to saa7146(0), the card might be broken.
- If the errors still come from saa7146(1), try a different PCI slot.
(I2C errors might be caused by noise on power supply lines.)
Hmm, so changing the PSU for a better one could solve i2c problems??
Waw is it
Hi!
Am Dienstag, den 13.11.2007, 15:44 -0800 schrieb Brandon Philips:
Hello Mauro,
Please review and pull from http://ifup.org/hg/v4l-dvb for:
Brandon, that above link is dead for me.
Likely not related to all what you try to fix currently, maybe I have to
read the recent patch policy
Am Dienstag, den 13.11.2007, 21:31 -0800 schrieb Brandon Philips:
On 05:27 Wed 14 Nov 2007, hermann pitton wrote:
Am Dienstag, den 13.11.2007, 15:44 -0800 schrieb Brandon Philips:
Please review and pull from http://ifup.org/hg/v4l-dvb for:
Brandon, that above link is dead for me.
My
Am Mittwoch, den 14.11.2007, 07:27 +0100 schrieb hermann pitton:
Am Dienstag, den 13.11.2007, 21:31 -0800 schrieb Brandon Philips:
On 05:27 Wed 14 Nov 2007, hermann pitton wrote:
Am Dienstag, den 13.11.2007, 15:44 -0800 schrieb Brandon Philips:
Please review and pull from
Here is a patch against linux-2.6.22.1
- Original
Sender: Patrick Boettcher [EMAIL PROTECTED]
Receiver: Shuhao Chang [EMAIL PROTECTED]
CC: linux-dvb@linuxtv.org
Date: Mon, Oct 22 15:39:12 +0800
Subject: Re: [linux-dvb] is dib7070m supported?
Hello,
As you have received a development
24 matches
Mail list logo