Hi
I'd like to ask what the status of support for this card is. Is there
even any driver in the works? I've attached pictures of the card for
clarity. It says its a TechniSat SkyStar2 rev2.8A and the dealer told me
that TechniSat doesn't ship anything other than those anymore.
have chris pascoe intrested but he is very busy so could be a while before he
looks into it
the new card has a new hardware id last 2 digits is 98 not 78
am working with a mate who has a revision 1.1 card
if i change the v4l-dvb haidware id to mine
linux will pick it up and install the driver
Manu Abraham wrote:
What do you use to play back ? is the distortions seen with dvb-s2/h.264
only ?
I'm using vdr-1.5.12 with Reinhard Nissls h.264 patch and xine.
Just for comparison... Tuning with the TT S2-3200 works for DVB-S and
DVB-S2 channels. The picture quality great, no distortion
have chris pascoe intrested but he is very busy so could be a while
before he looks into it
the new card has a new hardware id last 2 digits is 98 not 78
am working with a mate who has a revision 1.1 card
if i change the v4l-dvb haidware id to mine
linux will pick it up and install the
Simeon Simeonov wrote:
I don't know if is the same but with the latest mantis tree I get 100%
success.
Reverting to changeset mantis-100d4b009238 (which I think corresponds to
multiproto 7200)
I do NOT any locks on the same transponder.
For the mantis tree, please test this changeset: 7275
nothing in dmesg
firmware in folder
chris asked me for a ssh box
is installed and ready to go
only thing loaded is chris's v4l tree
if you wanted to have a look ill email you the details
heres the lsusb
Bus 005 Device 003: ID 0fe9:db98 DVICO
Bus 005 Device 002: ID 0fe9:db98 DVICO
Note the hw
nothing in dmesg
firmware in folder
chris asked me for a ssh box
is installed and ready to go
only thing loaded is chris's v4l tree
if you wanted to have a look ill email you the details
If Chris is looking into it then that's good, I'm not exactly an expert
in these sorts of things.
[Resending patch with proper signed-off-by and updated description, but
otherwise unchanged]
Hi there,
Currently (in linux-2.6.24, but linux-dvb hg looks similar), the
dmx_output_t in the dmx_pes_filter_params decides two things: whether
output is sent to demux0 or dvr0 (in
hi guys,
I'm experiencing problems with DVB playback with MythTV. The problems
are restricted mainly to one channel.
Suggestions most welcome.
Setup
The tuner is a Leadtek WinFast DTV USB dongle (driver dib3000mc).
I got firmware from
Fellow dvb'ers,
My friend bought a AVerTV Hybrid Volar HX A827 for is linux pc and hoped
it would work. After he spent a day to get it working he asked my help.
I tried a hole list of things, and went through the code. I tried to get
it working with the a800 driver and added some device ID's
2008/2/28, Jelle de Jong [EMAIL PROTECTED]:
Fellow dvb'ers,
My friend bought a AVerTV Hybrid Volar HX A827 for is linux pc and hoped
it would work. After he spent a day to get it working he asked my help.
I tried a hole list of things, and went through the code. I tried to get
it
Hello,
I want to buy a device that allows me to watch dvd-t signals under Linux.
I want this device to work under linux on my usb port.
And i need to buy the device at this store for support:
http://www.informatique.nl/cgi-bin/iqshop.cgi?M=ARTG=167
secondary like to haves:
- works on 900 MHZ
Hi Jelle,
On Thu, Feb 28, 2008 at 3:47 PM, Jelle de Jong
[EMAIL PROTECTED] wrote:
Hello,
I want to buy a device that allows me to watch dvd-t signals under Linux.
I want this device to work under linux on my usb port.
And i need to buy the device at this store for support:
Craig Whitmore wrote:
- Original Message -
From: Halim Sahin [EMAIL PROTECTED]
To: linux-dvb@linuxtv.org
Sent: Thursday, February 28, 2008 11:42 AM
Subject: Re: [linux-dvb] New Hauppauge DVB PCIe devices HVR-2200,HVR-1700
and HVR-1200
Has anyone actually put a HVR-2200 in a
On Mittwoch, 27. Februar 2008, Eduard Huguet wrote:
Hi, Matthias
Hi Eduard!
I've seen that you have new patches for the card on the folder
referenced in the wiki. Unfortunately none of them seems to work with my
card. I'm startint to think that I'm doing something fundamentally wrong...
Oliver Bardenheier (obardenh) wrote:
Seppo, You should use the group-mailer linux-dvb@linuxtv.org
Sorry Olivier, I didn't mean to send you personal email!
I still have the same problem and I'm not familiar with various DVB
driver sources discussed here (hg-tree, mantis). As I suppose I
OK, thanks. The GPIO status values corresponded to DVB-S use, I haven't
tested the analog input nor in Windows nor Linux because I don't have
anything to connect to it...
I think there are couple of snapshots points on the report. IIRC the first
one correspond to the initial state (before ever
No problem, :-)
You just check out the tree via the webpage:
http://jusst.de/hg/multiproto
then click on the needed changeset
http://jusst.de/hg/multiproto/rev/0448e5a6d8a6
and download the bzip with the complete changeset
http://jusst.de/hg/multiproto/archive/0448e5a6d8a6.tar.bz2
The rest
Hello,
I think this page is very useful, because it explains the procedure
quite well (also tells you about modified scan and zap):
http://www.linuxtv.org/wiki/index.php/Multiproto
Regards
Oliver Bardenheier (obardenh) wrote:
No problem, :-)
You just check out the tree via the webpage:
Oliver Bardenheier (obardenh) wrote:
No problem, :-)
You just check out the tree via the webpage:
http://jusst.de/hg/multiproto
then click on the needed changeset
http://jusst.de/hg/multiproto/rev/0448e5a6d8a6
and download the bzip with the complete changeset
Vangelis Nonas wrote:
I think this page is very useful, because it explains the procedure
quite well (also tells you about modified scan and zap):
http://www.linuxtv.org/wiki/index.php/Multiproto
Thanks for this as well! Modified scan zap would have been next in my
question list :^)
BR,
On Thu, 2008-02-28 at 19:11 +, Philip Pemberton wrote:
[EMAIL PROTECTED]:~$ uptime
19:06:28 up 23:42, 3 users, load average: 1.19, 1.22, 1.18
And the log is full of this crap:
Feb 28 06:29:13 dragon syslogd 1.5.0#1ubuntu1: restart.
Feb 28 06:29:13 dragon kernel: [39865.332785]
Hi
I have exactly the same problem, all seems fine on vdr until I start one
recording that use the second timer , I got thousand of message like this
one , it seems stg is not well loaded some time, I just have to shutdown vdr,
I can see that device disconnect itself on dmesg and all is OK
cd $HOME
hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental
cd v4l-dvb-experimental
make
sudo make install
v4l-dvb-experimental will not compile on debian sid 2.6.24-1-686
If you guys need more information i will sent it to the list.
Kind regards,
Jelle
On Thu, Feb 28, 2008 at 3:39 PM, Jelle de Jong
[EMAIL PROTECTED] wrote:
cd $HOME
hg clone http://mcentral.de/hg/~mrec/v4l-dvb-experimental
cd v4l-dvb-experimental
make
sudo make install
v4l-dvb-experimental will not compile on debian sid 2.6.24-1-686
If you guys need more
This this OT, but I don't really know where to ask. And after all, the
odds are that I will find a person with that sort of knowledge here.
I currently have a masthead amp for my DVB-T antenna. It uses a power
supply in the house that inject current through the antenna cable.
I am now installing
Hi Jelle,
which device device did you buy?
there are 2 different kind of driver available.
There's a patch available on the em28xx mailinglist which I haven't
added to v4l-dvb-experimental yet (I'll go through it tomorrow) to fix
those compatibility issues.
Markus
On 2/28/08, John Drescher
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e.txt
Spent my hole day trying to get a dvd-t device up and running, this is
device number two I tried.
Can somebody please tell me how to get this device
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e.txt
Spent my hole day trying to get a dvd-t device up and running, this is
device number two I tried.
Can somebody please tell
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e.txt
Spent my hole day trying to get a dvd-t device up and running, this
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e.txt
Spent my hole day trying to get a dvd-t device up
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e.txt
Spent my hole day trying to get a dvd-t device up and running, this is
device number two I tried.
Can somebody please tell
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick
On 2/28/08, Markus Rechberger [EMAIL PROTECTED] wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This message contains the following attachment(s):
Pinnacle
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
This
On 2/28/08, Markus Rechberger [EMAIL PROTECTED] wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus
This message contains the following attachment(s):
Pinnacle PCTV Hybrid Pro Stick 330e.txt
Spent my hole day trying to get a dvd-t device up and running, this is
device number two I tried.
Can somebody please tell me how to get this device working on:
2.6.24-1-686 debian sid and
Markus Rechberger wrote:
On 2/28/08, Markus Rechberger [EMAIL PROTECTED] wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus
hmmm...
guys.
First thing: on a Debian or Ubuntu system, I never needed the full Linux
sources to compile a v4l-dvb tree. The headers were always enough.
Second thing: when you compile a v4l-dvb tree on the side, I do not
think that it is adding anything in the headers.
So, if you subsequently
I have for vp-1041:
72e81184fb9f work with SR=22000, hi SR work with frequency offset ~+6 MHz for
SR 44948
a9ecd19a37c9 work with SR 44948 ok
but both have trouble, from time to time long wait for lock, from time to time
faster lock... I can't find dependence...
I use vdr-1.5.14+h264 patch,
... But diseqc positioner commands (GotoX from vdr rotor plugin) seem to
not get through with 100% reliability. Changing to use diseqc.conf
seemed to help a bit but I haven't been able to convince the motor to
turn to 28.2E at all.
Did you try changing line 250 in mantis_dvb.c to:
I've got a Hauppauge 1800 with a cx23885 (I think) analog tuner card
in it, I've not seen much progress on that driver for a month or so
[EMAIL PROTECTED] cx23885]# hg log cx23885* | head
changeset: 7237:e3b8fb8cc214
user:Mauro Carvalho Chehab [EMAIL PROTECTED]
date:Mon Feb 25
With 72e81184fb9f I get lock 5/10 times of the times and with a9ecd19a37c9
9/10 times.
But with 72e81184fb9f I couldn't get neither my rotor nor diseqc switch to work
as
opposed to the tip where both work with some problems - sending more than
2 diseqc messages messes up my rotor.
-
On 2/29/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Markus Rechberger [EMAIL PROTECTED] wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On 2/28/08, Jelle de Jong [EMAIL PROTECTED] wrote:
Markus Rechberger wrote:
On
On 2/29/08, Nicolas Will [EMAIL PROTECTED] wrote:
hmmm...
guys.
First thing: on a Debian or Ubuntu system, I never needed the full Linux
sources to compile a v4l-dvb tree. The headers were always enough.
Second thing: when you compile a v4l-dvb tree on the side, I do not
think that it is
On 2/28/08, Dominique P. [EMAIL PROTECTED] wrote:
Hi
I have exactly the same problem, all seems fine on vdr until I start one
recording that use the second timer , I got thousand of message like this
one , it seems stg is not well loaded some time, I just have to shutdown vdr,
I can see that
49 matches
Mail list logo
