Hello,
I respond two times to the confirmation mail, then mail with right line
in the body like it said altrenatively.
Is there a moderator to fixe my subscription or is it a non free private
club ? ;-))
Nicolas.
PS A can wear a tie ;-)
--
Info:
To unsubscribe send a mail to [EMAIL
is REALLY
supported or not ? otherwise I buy a nexus-s.
Nicolas.
PS Sorry I can't follow the thread because I don't receive mails from
the list. The Full inscription failed.
Is there somebody in charge here ? ;-))
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with unsubscribe linux-dvb
250, 5 Jul 27 18:55 dvr0
crw-rw 1 root video 250, 3 Jul 27 18:55 frontend0
crw-rw 1 root video 250, 7 Jul 27 18:55 net0
crw-rw 1 root video 250, 8 Jul 27 18:55 osd0
crw-rw 1 root video 250, 0 Jul 27 18:55 video0
Thanks in advance for help.
Nicolas
Nicolas wrote:
Hi,
I am not able to scan dvb signal , on my skystar2 ( Rev 2.6B ) with
the scan utility.
I try the 2.6 kernel ( 2.6.8-rc2 ), with native skystar drivers.
and also the 2.4 kernel ( 2.4.25 ) , with libdvb-1.1.0.
And i get the same result :
# ./scan -v /root/Astra-1H
scanning /root
I am not able to scan dvb signal , on my skystar2 ( Rev 2.6C ) with
the scan utility.
I try the 2.6 kernel ( 2.6.8-rc2 ), with native skystar drivers.
and also the 2.4 kernel ( 2.4.25 ) , with libdvb-1.1.0.
And i get the same result :
# ./scan -v /root/Astra-1H
scanning /root/Astra-1H
using
* Trident TVMaster TM6000 - Audio codec, Video decode, USB 2.0
Bridge
* XCEIVE XC3028 analog and digital TV Tuner
* Zarlink (now Intel) ZL10353 DVB-T demodulator
* 24LC641SN
* LBNJ N208 601
I have posted pictures here:
http://www.youplala.net/v/nicolas
On Fri, 2007-06-08 at 14:01 +0100, Michel Ludwig wrote:
This device should be another candidate for the TM6000 driver. The only
problem is that I don't have much time at the moment to work on it. But I can
try to add your device to the driver as it is now, and it could be the case
that
On Fri, 2007-06-08 at 14:13 +0100, Nicolas Will wrote:
On Fri, 2007-06-08 at 14:01 +0100, Michel Ludwig wrote:
This device should be another candidate for the TM6000 driver. The only
problem is that I don't have much time at the moment to work on it. But I
can
try to add your
On Fri, 2007-06-08 at 14:42 +0100, Michel Ludwig wrote:
It looks good so far, but you definitely need an antenna! :-)
Michel, and all other dvb hackers,
Well, I have not met the expected success.
So, here is what I have done, once I have connected the antenna that
came with the tuner (short
On Mon, 2007-06-11 at 09:39 +0100, Michel Ludwig wrote:
What I can tell you from personal experience is that the short stick antenna
is *not* sufficient to receive DVB-T correctly in my place (uk-WinterHill).
You could try to connect a roof antenna to your stick
That I will do. I just
On Mon, 2007-06-11 at 09:39 +0100, Michel Ludwig wrote:
What I can tell you from personal experience is that the short stick
antenna
is *not* sufficient to receive DVB-T correctly in my place
(uk-WinterHill).
You could try to connect a roof antenna to your stick and then see
whether
you
On Fri, 22 Jun 2007 20:00:15 +0100, Nicolas Will [EMAIL PROTECTED] wrote:
So, what brand/model is known to work without fuss for DVB-T, and is
widely available in the UK (Aberdeen, Scotland in particular?
I bought a Freecom stick from the local PCWorld, and it worked immediately
without
Hi all,
I am still seting up that MythTV box. So far, it works great with my
Freecom DVB-T USB stick.
Nevertheless, I am listening to the warning that those sticks are not
too good in the medium/long term, and I am looking at PCI cards.
I also want to get a proper remote system with such a
Vista's. 1 GB or RAM if not enough for that thing? What a shocker ! And
it is as stable as ever...not!
Nico
http://www.youplala.net/linux/home-theater-pc/
On Fri, 2007-07-20 at 11:04 +0100, Nicolas Will wrote:
Hi all,
I am still seting up that MythTV box. So far, it works great with my
Freecom
One more...
Hauppauge WinTV HVR-4000 - DVB-S2 / DVB-S / DVB-T receiver / analogue
TV / radio tuner / video input adapter - PCI - SECAM, PAL
Hauppauge WinTV HVR-3000 - DVB-S / DVB-T receiver / analogue TV / radio
tuner / video input adapter - PCI - SECAM, PAL
What about these cards?
Any
On Tue, 2007-07-24 at 12:55 +0200, Jose Alberto Reguero wrote:
This patch fix Hauppauge Nova-T 500 USB disconnects.
h! Nice!
Really?
Does this mean I can go this afternoon to the shop and buy one of those
cards and be happy ever after?
Nico
excited
On Tue, 2007-07-24 at 12:16 +0100, Torgeir Veimo wrote:
like some remote control support code? :))
well, this is something I forgot...
What's the status on this? Is anyone working on it?
Nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
On Tue, 2007-07-24 at 19:49 +0200, Janne Grunau wrote:
On Tuesday 24 July 2007 19:19:12 Janne Grunau wrote:
On Tuesday 24 July 2007 19:04:09 Nicolas Will wrote:
On Tue, 2007-07-24 at 12:16 +0100, Torgeir Veimo wrote:
like some remote control support code? :))
well
Jose,
You gave us two patches.
first, this one:
This patch fix Hauppauge Nova-T 500 USB disconnects.
Signed-off-by: Jose Alberto Reguero [EMAIL PROTECTED]
Then this one.
This patch is only for the Nova-T 500. The device name is for not break
anything for other devices that use the
All contributors,
First, thanks for your work, very much appreciated, indeed.
So do not take the following as a flame, it is not a flame.
I now own a NOVA-T-500.
So I a very interested by te current activity. Activity is good.
I see various efforts on the disconnects.
I see efforts on the
All right,
Let's start.
I have gathered the recent series of patches published on the list on my
web site:
http://www.youplala.net/~will/htpc/v4l-dvb_patches/
* 1-mt2266_4.diff 21-Jul-2007 15:40 24K
* gets the dib0700 based diversity devices remote to work
*
On Mon, 2007-07-30 at 11:56 +0200, Janne Grunau wrote:
My guess would be to get the latest Mercurial tree and apply
3. patch 3b
4. patch 4a
5. patch 4b
only this three patches are needed.
in that order, for my NOVA-T-500.
Janne,
Many thanks for this.
I'll see if
On Mon, 2007-07-30 at 11:56 +0200, Janne Grunau wrote:
* 4a-keymap_Hauppauge_Nova-TD_Stick.diff 30-Jul-2007 10:57
2.8K
* Add remote keymap for the Hauppauge Nova-TD Stick
* Janne Grunau
* Post:
Janne,
On Mon, 2007-07-30 at 13:15 +0200, Janne Grunau wrote:
the patches apply cleanly here. Try with attached ones
clean, indeed.
Compiling now.
Will edit the wiki !
Thanks for such a quick reaction time.
Nico
___
linux-dvb mailing list
On Mon, 2007-07-30 at 12:33 +0100, Torgeir Veimo wrote:
Don't forget this patch!
http://linuxtv.org/pipermail/linux-dvb/2006-December/014926.html
Was there any feedback?
Nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
All right.
Anybody has issues about this? Corrections?
http://linuxtv.org/wiki/index.php/WinTV-NOVA-T-500_PCI
Nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
On Mon, 2007-07-30 at 16:30 +0100, Torgeir Veimo wrote:
Looks good. I didn't actually know that the first version was rock
solid
wrt to the usb disconnects..
This was already on the wiki page, before my edits.
See? documentation is good :o)
Has anyone actually verified that the remote now
On Mon, 2007-07-30 at 18:30 +0200, Patrick Boettcher wrote:
Dear all,
Can all of you using a dib0700-based-design with problem please try the
following firmware
http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-03-pre1.fw
and the latest drivers from
On Mon, 2007-07-30 at 18:56 +0200, Patrick Boettcher wrote:
I committed those two patches into my repository:
http://linuxtv.org/pipermail/linux-dvb/2007-July/019349.html
I will ask Mauro to pull it to main later.
Thanks for your patches,
Yes! Remote is in!
One last thing that Torgeir
On Mon, 2007-07-30 at 18:56 +0200, Patrick Boettcher wrote:
I committed those two patches into my repository:
http://linuxtv.org/pipermail/linux-dvb/2007-July/019349.html
I will ask Mauro to pull it to main later.
Thanks for your patches,
Yes! Remote is in!
One last thing that Torgeir
On Mon, 2007-07-30 at 22:04 +0200, Patrick Boettcher wrote:
Args, stupid mistake.
It should be fixed (w/o warranty)!
Let's see...
get new hg clone
make -j 4 (got to love multiple cores :o) )
sudo make install
sudo reboot
[ 31.225984] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in
On Mon, 2007-07-30 at 21:23 +0100, Nicolas Will wrote:
Be back in a while for initial impressions and remote support.
OK, it does work, both tuners. Outside of this... I don't know what to
say right now. Should I leave a channel on for as long as possible until
it eventually fails?
(I have
On Mon, 2007-07-30 at 22:55 +0200, Janne Grunau wrote:
You need a cold (powerless) reboot to get the new firmware loaded.
You
don't have to worry about the firmware file. The exact filename is
hardcoded in the source.
You can check if you look in your kernel messages for following line:
On Tue, 2007-07-31 at 00:18 +0100, Darren Salt wrote:
Just so we know what (not) to avoid:
What model nos. are on the boxes for known-good Nova-T 500s?
Mine : WinTV-NOVA-T-500 model 289 SL-289-V2.0-UK
What model no. is on the box for the Nova-TD 500?
Waiting for answers, feel free.
On Mon, 2007-07-30 at 21:50 +0100, Nicolas Will wrote:
OK, it does work, both tuners. Outside of this... I don't know what to
say right now. Should I leave a channel on for as long as possible
until
it eventually fails?
I left the MythTV run all night, using both tuners using PiP.
I made
On Mon, 2007-07-30 at 20:09 +0100, Nicolas Will wrote:
Yes! Remote is in!
Yes! Remote will be in! (with Janne's new line removal patch)
I still do not know how to use/check it!
One last thing that Torgeir Veimo looked keen to have :
http://linuxtv.org/pipermail/linux-dvb/2006-December
I'm back at this...
First,let me see if I understand the concept well.
The remote control is really given to the system as an input device,
like a keyboard.
That way, every time I press a remote key, the kernel sends a code, just
like when I press a multimedia key on an extended keyboard.
Is
On Wed, 2007-08-01 at 00:52 +0200, Patrick Boettcher wrote:
Hi all,
I just asked Mauro to pull all my changes regarding the dib0700-based
device into the main repository.
I'm quite happy with the results I already received and to reach more
users before the next kernel integration I think
On Wed, 2007-08-01 at 15:25 +0200, Janne Grunau wrote:
On Wednesday 01 August 2007 14:30:31 Nicolas Will wrote:
On Wed, 2007-08-01 at 00:52 +0200, Patrick Boettcher wrote:
Hi all,
I just asked Mauro to pull all my changes regarding the
dib0700-based device into the main repository
On Wed, 2007-08-01 at 16:25 +0200, Soeren Sonnenburg wrote:
So I can update the wiki, removing the patches, linking to the pre1
firmware, and say that it fixes the disconnects for good?
Well no. As I wrote in a different mail, the disconnect happened here
again after just 30 minutes :((
On Thu, 2007-08-02 at 09:47 +0100, Nicolas Will wrote:
On Wed, 2007-08-01 at 16:25 +0200, Soeren Sonnenburg wrote:
So I can update the wiki, removing the patches, linking to the pre1
firmware, and say that it fixes the disconnects for good?
Well no. As I wrote in a different mail
On Thu, 2007-08-02 at 18:54 +0200, Henrik Beckman wrote:
* MT1060_IF1_freq_set.diff - 2.3K
* Sets the MT2060 IF1 frequency according to the calibration
values stored in the EEPROM. It is supposed to enhance the signal quality
* Olivier Danet
* Post:
On Fri, 2007-08-03 at 08:47 +0200, Henrik Beckman wrote:
Haven´t tried that.
But I will update to the latest code and firmware next week and do a
check if the reception patch is still needed
and general functionality test.
I am trying it.
It patches fine, it compiles fine, and the module
On Fri, 2007-08-03 at 08:57 -0400, CityK wrote:
1) Firmware listed looks to be the old (buggy) one ... can someone
correct please
this has been corrected yesterday,
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Firmware
pointing to
On Fri, 2007-08-03 at 10:18 -0400, CityK wrote:
(and thanks for the good work in the wiki)
Just a tiny bit of work in return for the huge amount of work given by
the devs.
nico
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Torgeir,
I think that you are not running the latest code with the latest
firmware.
Aug 1 00:01:16 htpc2 kernel: dib0700: loaded with support for 3 different
device-types
It should say 5 different devices, not 3.
Aug 1 00:01:16 htpc2 kernel: dvb-usb: downloading firmware from file
On Mon, 2007-08-06 at 01:32 +0100, Chris Murton wrote:
drivers would not lock to most channels
Do you have the LNA turned on?
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#On-board_amplifier
Nico
___
linux-dvb mailing list
Well,
Let's refine the final things about this card's support.
I am still getting tons of this message in my logs:
Aug 6 08:35:47 favia kernel: [55193.646677] dib0700: Unknown remote controller
key : 18 7C
Nico
___
linux-dvb mailing list
Guys,
The HVR4000 looks good on paper, but activity in not heavy, and it has
that design flow that prevents it from being real useful (cannot do T
and S at the same time).
So I am looking for a dedicated DVB-S2 only solution in order to expand
my HTPC.
So what about the Hauppauge WinTV
On Wed, 2007-08-08 at 17:18 +0100, [EMAIL PROTECTED] wrote:
Searching the list shows a few instances of these, but not much
further
discussion so I'm not sure what the status is. In case it turns out to
be
useful, here's a trace from my mythbackend box. This has an x86_64
kernel.
I
On Wed, 2007-08-08 at 18:05 +0100, Tim Smith wrote:
when did you get the v4l-dvb tree?
2.6.22.1-41.fc7 :-)
So this is the stock FC7 kernel.
If it is, I would strongly suggest that you build a current tree against
your kernel, as development for this board has moved forward quite a bit
in
On Thu, 2007-08-09 at 07:50 +0100, Tim Smith wrote:
Since this is a RedHat kernel, I probably ought to open a bug
there...:-/
That would be useful for them, but I really recommend that you get the
latest tree and compile it (you do not need to recompile a whole kernel,
just the DVB stuff)
On Sun, 2007-08-05 at 00:53 +0100, Andy Thomas wrote:
Unfortunately I'm still seeing the USB disconnects even with the new
firware and drivers on a new Hauppauge NOVA-T-500.
oh... insert despair cry of your choice
Got it too...
Aug 8 05:31:07 favia kernel: [35836.965561] usb
On Thu, 2007-08-09 at 22:34 +0200, Eduard Huguet wrote:
Hi,
I've started to use the new remote support for the Hauppauge Nova
T-500 and it's working nearly fine except for one thing: it seems to
really conflict with my TV remote.
Briefly: certain keys in my TV remote (when pressed
On Thu, 2007-08-02 at 00:28 +0200, Jonas Anden wrote:
If the sample below is what your remote control errors in syslog is,
the attached patch gets rid of it.
---
Aug 1 13:44:26 ragnyr kernel: dib0700: Unknown remote controller
key : 1E 2A
Aug 1 13:44:57 ragnyr last message repeated 206
On Fri, 2007-08-10 at 12:24 +0200, Eduard Huguet wrote:
I'll try to test it also. Is there any possibility that this patch
gets included into main HG repository?
I guess we will have to wait until Patrick comes back from his vacation.
I hope he gets proper rest and comes back with a bright
On Wed, 2007-08-15 at 22:28 +0100, Andy Morton wrote:
Finally got around to configuring the nova-t 500 remote with the latest
drivers + firmware, but button presses are only recognised within around
12 inches of the receiver. I was just wondering if anyone else is having
this problem, or if
On Thu, 2007-08-16 at 10:09 +0200, Harald Gustafsson wrote:
I should clarify that the whole shutdown process is done, but then it
hanged with a black screen instead of powering off.
This may be completely unrelated to DVB.
Check this bug:
On Wed, 2007-08-29 at 07:44 +0200, Maillist wrote:
The firmware I am using is dvb-usb-dib0700-03-pre1.fw and yesterday I
tried to
downgrade to dvb-usb-dib0700-01.fw but I was not able to load that,
always tried
to load the previous one (which I deleted to avoid conflicts).
The current code
On Thu, 2007-08-30 at 08:03 +0200, Maillist wrote:
I have an amplifier installed close to antenna.
This is where you want it.
The amplifier has 4 outputs
I hope this is a good quality splitter you got there.
and
one of them are connected to the server which are placed in the
On Thu, 2007-08-30 at 08:06 +0100, Nicolas Will wrote:
At the server I have a 1-2 splitter
Good quality splitter? Nothing plastic, ugly little metallic boxes are
usually better.
You will want stuff like that
Low Insertion loss splitters, high separation
http://ec1
On Fri, 2007-08-31 at 09:38 +0200, Maillist wrote:
- The amplifier is Televés 5523,
http://www.kjell.com/?item=30294path=50,200,320
As long as it is on-antenna, it should be fine.
For the rest, it sounds all good too.
Nico
___
will certainly be eager to
support these efforts and provide all the feedback you may need.
Nicolas Will
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
On Fri, 2007-09-07 at 12:13 +0200, Eduard Huguet wrote:
Good try! I don't know if this will be even remotely helpful, but at
least you tried.
Well, then add your own layer and send a similar email to the same list
of companies.
Complaining here will only take you so far...
It's really a
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote:
Some time has gone by and there have been some fixes.
Can everyone please try the latest firmware from
http://www.wi-bw.tfh-wildau.de/~pboettch/home/linux-dvb-firmware/dvb-usb-dib0700-1.10.fw
?
Don't forget to either change
On Tue, 2007-09-11 at 12:08 +0200, Douglas Pierce-Price wrote:
First, make sure you went through this:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500
Also, can anyone advise me on the best way to ensure I'm using the
latest v4l-dvb drivers?
Then this is what you need:
On Tue, 2007-09-11 at 07:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 10:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote:
Some time has gone by and there have been some fixes.
Can everyone please try the latest firmware from
On Tue, 2007-09-11 at 17:42 +0100, Nicolas Will wrote:
On Tue, 2007-09-11 at 07:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 10:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote:
Some time has gone by and there have been some fixes
On Wed, 2007-09-12 at 15:31 +0200, Maillist wrote:
I have problems to load this new firmware.
- I have added the file in /lib/firmware and removed the previous one.
- Shutdown, halt the system
- Boot the system
- Checks the dmesg and it shows that it tries to load the previous
firmware
On Thu, 2007-09-13 at 11:18 +0200, Simon G wrote:
How can I solve this to run the latest FW?
// Joacim
2 Ways ... (I think, can someone else say if this is correct or not?)
1. Change the name of the firmware (.fw) to match the old one.
2. Edit
On Wed, 2007-09-12 at 07:46 +0100, Nicolas Will wrote:
On Tue, 2007-09-11 at 17:42 +0100, Nicolas Will wrote:
On Tue, 2007-09-11 at 07:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 10:29 +0100, Nicolas Will wrote:
On Mon, 2007-09-10 at 11:14 +0200, Patrick Boettcher wrote
On Fri, 2007-09-14 at 08:37 +0200, Eduard Huguet wrote:
Anyway, I must admit that the situation has improved a lot with
this new firmware / drivers, so thank you very much to all of you
involved in the project.
Seconded.
Many beer points won in the event of a meet.
Nico
On Thu, 2007-09-20 at 10:57 +0200, Thierry Lelegard wrote:
Receiver: Hauppauge WinTV NOVA-T-500
Firmware file: dvb-usb-dib0700-01.fw
Thierry,
You are using old code with an old firmware, and running into a known
problem.
I would suggest that you get the new stuff, including the latest test
On Thu, 2007-09-20 at 13:35 +0100, David Harvey wrote:
I'm still experiencing usb-disconnects with the new (1.10
firmware).
Funny that you should mention that in such timely fashion.
My machine just did the usual thing after 6 days of stability.
Things have improved, though, 6 days is
On Thu, 2007-09-20 at 15:18 +0100, David Harvey wrote:
Mine only lasted a matter of hours... timstamp : [ 6914.396000]
I'm still unsure given my instability issues with my other stick,
whether or not my current issues are reflective of flaky epia usb or
the dvb driver stack
But
On Sat, 2007-09-29 at 19:06 +0200, [EMAIL PROTECTED] wrote:
I'm having a very stupid, and boring, problem as I am trying to
install drivers for a Hauppauge WinTV-NOVA-T-500.
Let me suggest to have that read first:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500
I'm
On Wed, 2007-10-17 at 14:45 +1000, Dan Harper wrote:
On 16/10/2007, at 8:21 PM, Henrik Beckman wrote:
My guess is reception
Yep, I can now confirm reception is a problem. I had almost 2 weeks
of non-stop goodness until the wind and rain picked up here recently
(Melbourne, Australia)
Hello all,
Now that my DVB-T setup is mostly clean and stable, it is probably time
to introduce some new stuff ;o)
I really have 3 questions.
In DVB-S in general, can I have one receiving card and 2 LNBs with a
DiSEqC switch (2 dishes on 2 different satellites)?
Is the BBC Freesat in UK in
On Sat, 2007-11-03 at 21:18 +0100, P. van Gaans wrote:
On 11/03/2007 03:37 PM, Nicolas Will wrote:
Hello all,
Now that my DVB-T setup is mostly clean and stable, it is probably time
to introduce some new stuff ;o)
I really have 3 questions.
In DVB-S in general, can I have one
On Wed, 2007-09-26 at 11:42 +0200, Patrick Boettcher wrote:
Hi all,
it seems that there still problems related to USB with the latest
firmware.
In order to figure out what is the problem I would like to gather some
information about the affected systems:
Can everyone (people who
This has been a nagging issue. Not a show stopper, but now that the
system is quite stable, i'm willing to look at it.
The remote for the Hauppauge Nova-T-500 has no repeat whatsoever.
If you press the button and keep it that way, the card give one and only
one command.
I have tried the
On Thu, 2007-12-13 at 20:23 +0100, Luca wrote:
Nicolas Will wrote:
On Wed, 2007-12-12 at 22:49 +0100, Luca wrote:
I have this DVB-T USB device:
http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-TD-Stick
It seem supported by difference sources:
http://cateee.net/lkddb/web
Patric B. Wrote:
There is an important bug inside that driver which has a big
impact on the
signal reception. I'll already promissed to fix that as soon as
possible,
but it's not yet done.
I'm trying,
Patrick.
Hmm, I must have
Hi all,
I've had this stick in stock and haven;t used it for a while.
I have just compiled a current hg tree and plugged the device and
notices that it came up twice.
I don't remember that behaviour in my initial usage.
Kaffeine sees 2 devices too.
How normal or not is it?
Nico
Dec 20
On Tue, 2008-01-08 at 08:37 +1100, Jeffrey Borg wrote:
Not much has been said about the NOVA-T 500 on this list lately,
Mainly
because I believe its now fixed,
I beg to differ.
It is very usable, yes. I am happily using it.
But I still get the occasional usual hang, about once a month. Even
On Tue, 2008-01-08 at 08:17 +, Paul Elliott wrote:
Initially I tried the latest dvb sources on my 2.6.22 Gutsy kernel but
didn't have any luck with it,
This is what I am running, no issues with it.
But I have problems 15 miles away from the transmitter, 60 miles may be
the problem.
I'm
On Tue, 2008-01-08 at 10:29 +0100, Patrick Boettcher wrote:
Hi all,
The new year starts well, maybe: We found something which was in our
drivers from the beginning and nobody saw it. See attached.
I'm not sure whether it fixes something, but it might be possible.
Can
everyone try it
On Thu, 2008-01-10 at 11:24 +, Nicolas Will wrote:
On Tue, 2008-01-08 at 10:29 +0100, Patrick Boettcher wrote:
Hi all,
The new year starts well, maybe: We found something which was in our
drivers from the beginning and nobody saw it. See attached.
I'm not sure whether it fixes
On Tue, 2008-01-15 at 05:12 -0800, Stephen G wrote:
I have ordered a splitter/amplifier
Those are usually bad.
The only place where an amplifier helps is right on the antenna itself,
where it amplifies the signal, not the signal AND all the noise inserted
along the line between the antenna and
On Mon, 2008-01-21 at 21:09 +0100, Soeren Moch wrote:
Janne Grunau wrote:
On Monday 21 January 2008 18:07:06 Soeren Moch wrote:
Hello!
The attached patch solves all my vdr tuning problems on a dib7000p
nova-t stick as far as I could check within the last weekend.
Perhaps this
On Mon, 2008-01-21 at 22:19 +0100, Soeren Moch wrote:
Tuning on low signal still does not work, though. ITV4, with mythtv
saying 49% goes to lock, but no TV.
What should I be looking for, on fact?
My vdr was hanging with black screen after channel switching in ~5% of
all cases.
On Mon, 2008-01-21 at 20:39 +, Nicolas Will wrote:
I will be updating the wiki page, tell me if it goes into the main
tree,
please.
Done:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Drivers
Nico
___
linux-dvb mailing list
On Mon, 2008-01-21 at 21:05 +0100, Carsten Aulbert wrote:
Marco Di Fresco wrote:
I am looking to get at least the support for the analog TV, but it
would
be great if I can also watch digital TV. I don't know if it matters
(maybe for the local digital TV standad and for the market
On Mon, 2008-01-21 at 22:12 +, Nicolas Will wrote:
This card, outside of very poor reception
Outside of pretty poor reception ares.
The reception of the card seems fine AFAIK.
Being a non-native speaker leads to bad wording, sorry.
Nico
All, and maybe Patrick in particular,
There is a list of patches here:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Drivers
Some could probably be considered for inclusion into the main tree.
Some may be hacks that probably have a good reason to be, but with a
weird
On Tue, 2008-01-22 at 12:41 +0100, Eduard Huguet wrote:
Hi,
I've just applied the patch and compiled the drivers. I haven't
tested actual tuning, since I'm not in front of my computer now, but
this is awaken and idle so MythTV is currently simply scanning EIT
data. So well, the
---BeginMessage---
Nicolas Will wrote:
All, and maybe Patrick in particular,
There is a list of patches here:
http://linuxtv.org/wiki/index.php/Hauppauge_WinTV-NOVA-T-500#Drivers
Some could probably be considered for inclusion into the main tree.
I didn't even know about these patches
Hi,
There is a Kworld DVB-S 100 PCI for cheap at the local Maplin.
In the hg tree I've seen the following:
v4l/cx24123.c:Support for KWorld DVB-S 100 by Vadim Catana
[EMAIL PROTECTED]
It looks like support is there, more or less confirmed by a search
through the list.
The wiki has no
On Fri, 2008-01-25 at 11:36 +0100, Patrick Boettcher wrote:
Hi Mauro,
Can you please pull from
http://linuxtv.org/hg/~pb/v4l-dvb/
for a bunch of changes for DiBcom-based hardware.
Mauro,
Could you tell me once this is pulles, I'll clean-up the wiki.
All users, can you please
On Fri, 2008-01-25 at 12:27 +0100, Patrick Boettcher wrote:
Just have a look here:
http://linuxtv.org/hg/~pb/v4l-dvb/
and you'll see the patches which made it into.
So far, I've seen:
* MT2060 IF1 frequency from Olivier Danet
(MT1060_IF1_freq_set.diff in wiki)
*
1 - 100 of 160 matches
Mail list logo