Re: [linux-dvb] Nova-S-Plus scan ERROR: Initial Tuning Failed

2008-03-17 Thread Timothy Parez
I just tested the card on Windows Vista and it works. Altough I'm only  
getting a limited ammount of channels
but had the same problem with my other card so that's probably not  
card related. (My TV decoder gets all channels)



Timothy.
On 17 Mar 2008, at 08:01, joris abadie wrote:

Since your post, I try with feisty and gutsy, the nova-S PCI and it  
is the same, no problem. Maybe your card is broken or something with  
your PC. Can you give me dmesg ?



2008/3/17, Timothy Parez <[EMAIL PROTECTED]>:
Hi,

I put the card in a new computer and installed Ubuntu Hardy, the  
latest preview.

The adapter is recognized so I installed dvb-utils.

Then I executed
scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E

The result was the same

WARNING >>> tuning failed!


Timothy.


On 16 Mar 2008, at 20:33, joris abadie wrote:


Bonjour,
j'ai quatre satellites sur nova-S ( Astra 19°, hotbird ... ) et  
tout s'est installé tout seul.
Every thing is OK with HARDY no install to do ; me-tv or kaffeine  
have the chanels very good


2008/3/15, Timothy Parez <[EMAIL PROTECTED]>:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hi,

The output of lspci -vvv on my computer looks like this:

04:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 20
Region 0: Memory at e500 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 20
Region 0: Memory at e600 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 20
Region 0: Memory at e700 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:00.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 7
Region 0: Memory at e800 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I installed v4l and now have a /dev/dvb/adapter0 directory
demux0  dvr0  frontend0  net0

I should note that the items in that directory are colored yellow  
with

black background (perhaps this is indicating something related to the
problem?

When I use scan I get this

scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 2200 5
  >>> tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
  >>> tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done

Re: [linux-dvb] Nova-S-Plus scan ERROR: Initial Tuning Failed

2008-03-17 Thread Timothy Parez
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hi,

I've included the DMESG en lspci -vvv command outputs:



DMESG:

[0.00] Linux version 2.6.24-12-generic ([EMAIL PROTECTED]) (gcc  
version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC  
2008 (Ubuntu 2.6.24-12.22-generic)
[0.00] BIOS-provided physical RAM map:
[0.00]  BIOS-e820:  - 0009fc00 (usable)
[0.00]  BIOS-e820: 0009fc00 - 000a  
(reserved)
[0.00]  BIOS-e820: 000e8000 - 0010  
(reserved)
[0.00]  BIOS-e820: 0010 - 1f7e4000 (usable)
[0.00]  BIOS-e820: 1f7e4000 - 2000  
(reserved)
[0.00]  BIOS-e820: d000 - e000  
(reserved)
[0.00]  BIOS-e820: fec0 - 0001  
(reserved)
[0.00] 0MB HIGHMEM available.
[0.00] 503MB LOWMEM available.
[0.00] found SMP MP-table at 000fe700
[0.00] Entering add_active_range(0, 0, 128996) 0 entries of  
256 used
[0.00] Zone PFN ranges:
[0.00]   DMA 0 -> 4096
[0.00]   Normal   4096 ->   128996
[0.00]   HighMem128996 ->   128996
[0.00] Movable zone start PFN for each node
[0.00] early_node_map[1] active PFN ranges
[0.00] 0:0 ->   128996
[0.00] On node 0 totalpages: 128996
[0.00]   DMA zone: 32 pages used for memmap
[0.00]   DMA zone: 0 pages reserved
[0.00]   DMA zone: 4064 pages, LIFO batch:0
[0.00]   Normal zone: 975 pages used for memmap
[0.00]   Normal zone: 123925 pages, LIFO batch:31
[0.00]   HighMem zone: 0 pages used for memmap
[0.00]   Movable zone: 0 pages used for memmap
[0.00] DMI 2.3 present.
[0.00] ACPI: RSDP signature @ 0xC00E9C10 checksum 0
[0.00] ACPI: RSDP 000E9C10, 0014 (r0 COMPAQ)
[0.00] ACPI: RSDT 1F7F4040, 0038 (r1 COMPAQ CPQ0968   
20050825 0)
[0.00] ACPI: FACP 1F7F40EC, 0074 (r1 COMPAQ GRANTSD  
1 0)
[0.00] ACPI: DSDT 1F7F4267, 13F3 (r1 COMPAQ DSDT1  
MSFT  10E)
[0.00] ACPI: FACS 1F7F4000, 0040
[0.00] ACPI: SSDT 1F7F565A, 3303 (r1 COMPAQ  PROJECT1  
MSFT  10E)
[0.00] ACPI: APIC 1F7F4160, 0068 (r1 COMPAQ GRANTSD  
1 0)
[0.00] ACPI: ASF! 1F7F41C8, 0063 (r32 COMPAQ GRANTSD  
1 0)
[0.00] ACPI: MCFG 1F7F422B, 003C (r1 COMPAQ GRANTSD  
1 0)
[0.00] ACPI: DMI detected: Hewlett-Packard
[0.00] ACPI: PM-Timer IO Port: 0xf808
[0.00] ACPI: Local APIC address 0xfee0
[0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[0.00] Processor #0 15:4 APIC version 20
[0.00] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[0.00] Processor #1 15:4 APIC version 20
[0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[0.00] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[0.00] ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0])
[0.00] IOAPIC[0]: apic_id 1, version 32, address 0xfec0,  
GSI 0-23
[0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high  
level)
[0.00] ACPI: IRQ0 used by override.
[0.00] ACPI: IRQ2 used by override.
[0.00] ACPI: IRQ9 used by override.
[0.00] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[0.00] Using ACPI (MADT) for SMP configuration information
[0.00] Allocating PCI resources starting at 3000 (gap:  
2000:b000)
[0.00] swsusp: Registered nosave memory region:  
0009f000 - 000a
[0.00] swsusp: Registered nosave memory region:  
000a - 000e8000
[0.00] swsusp: Registered nosave memory region:  
000e8000 - 0010
[0.00] Built 1 zonelists in Zone order, mobility grouping on.   
Total pages: 127989
[0.00] Kernel command line:  
root=UUID=5f4e8bd1-8131-444d-9b1f-9a8ec6768f10 ro quiet splash
[0.00] mapped APIC to b000 (fee0)
[0.00] mapped IOAPIC to a000 (fec0)
[0.00] Enabling fast FPU save and restore... done.
[0.00] Enabling unmasked SIMD FPU exception support... done.
[0.00] Initializing CPU#0
[0.00] PID hash table entries: 2048 (order: 11, 8192 bytes)
[0.00] Detected 3192.078 MHz processor.
[   10.578614] Console: colour VGA+ 80x25
[   10.578618] console [tty0] enabled
[   10.578766] Dentry cache hash table entries: 65536 (order: 6,  
262144 bytes)
[   10.578928] Inode-cache hash table entries: 32768 (order: 5, 131072  
bytes)
[   10.586235] Memory: 499476k/515984k available (2164k kernel code,  
15872k reserved, 1007k data, 364k init, 0k highmem)
[   10.586242] v

Re: [linux-dvb] Nova-S-Plus scan ERROR: Initial Tuning Failed

2008-03-16 Thread Timothy Parez

Hi,

I put the card in a new computer and installed Ubuntu Hardy, the  
latest preview.

The adapter is recognized so I installed dvb-utils.

Then I executed
scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E

The result was the same

WARNING >>> tuning failed!


Timothy.


On 16 Mar 2008, at 20:33, joris abadie wrote:


Bonjour,
j'ai quatre satellites sur nova-S ( Astra 19°, hotbird ... ) et tout  
s'est installé tout seul.
Every thing is OK with HARDY no install to do ; me-tv or kaffeine  
have the chanels very good


2008/3/15, Timothy Parez <[EMAIL PROTECTED]>:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hi,

The output of lspci -vvv on my computer looks like this:

04:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 20
Region 0: Memory at e500 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [Audio Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 20
Region 0: Memory at e600 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [MPEG Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 20
Region 0: Memory at e700 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:00.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and
Audio Decoder [IR Port] (rev 05)
Subsystem: Hauppauge computer works Inc. Unknown device 9202
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-  
ParErr-

Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium  
>TAbort-

SERR- Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32  
bytes

Interrupt: pin A routed to IRQ 7
Region 0: Memory at e800 (32-bit, non-prefetchable)  
[size=16M]

Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I installed v4l and now have a /dev/dvb/adapter0 directory
demux0  dvr0  frontend0  net0

I should note that the items in that directory are colored yellow with
black background (perhaps this is indicating something related to the
problem?

When I use scan I get this

scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 2200 5
  >>> tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
  >>> tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


If I connect the cable to a decoder + tv I get all the channels and
perfect image.
I'm using a dual / twin LNB. Dual for Astra 19.2 E and 23.5 E with 2
connectors.

I did get it to work on my previous computer.


Any ideas?

Timothy.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.7 (Darwin)

iD8DBQFH3FDS+j5y+etesF8RAldeAKDeRHdC3YqDZNBze975O5peeRjILgCeNQqV
CukiOWQomn8Ctkn2ErrQMI4=
=QbCX
-END PGP SIGNATURE-

___
linux-dvb mailing list
linux-dvb@linuxt

[linux-dvb] Nova-S-Plus scan ERROR: Initial Tuning Failed

2008-03-15 Thread Timothy Parez
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hi,

The output of lspci -vvv on my computer looks like this:

04:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video  
and Audio Decoder (rev 05)
Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-  
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-  
SERR- TAbort-  
SERR- TAbort-  
SERR- TAbort-  
SERR- >> tune to: 12551:v:0:22000
WARNING: >>> tuning failed!!!
 >>> tune to: 12551:v:0:22000 (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.


If I connect the cable to a decoder + tv I get all the channels and  
perfect image.
I'm using a dual / twin LNB. Dual for Astra 19.2 E and 23.5 E with 2  
connectors.

I did get it to work on my previous computer.


Any ideas?

Timothy.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.7 (Darwin)

iD8DBQFH3FDS+j5y+etesF8RAldeAKDeRHdC3YqDZNBze975O5peeRjILgCeNQqV
CukiOWQomn8Ctkn2ErrQMI4=
=QbCX
-END PGP SIGNATURE-

___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb