Re: [linux-dvb] Nova-S-Plus scan ERROR: Initial Tuning Failed
I just tested the card on Windows Vista and it works. Altough I'm only getting a limited ammount of channels but had the same problem with my other card so that's probably not card related. (My TV decoder gets all channels) Timothy. On 17 Mar 2008, at 08:01, joris abadie wrote: Since your post, I try with feisty and gutsy, the nova-S PCI and it is the same, no problem. Maybe your card is broken or something with your PC. Can you give me dmesg ? 2008/3/17, Timothy Parez <[EMAIL PROTECTED]>: Hi, I put the card in a new computer and installed Ubuntu Hardy, the latest preview. The adapter is recognized so I installed dvb-utils. Then I executed scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E The result was the same WARNING >>> tuning failed! Timothy. On 16 Mar 2008, at 20:33, joris abadie wrote: Bonjour, j'ai quatre satellites sur nova-S ( Astra 19°, hotbird ... ) et tout s'est installé tout seul. Every thing is OK with HARDY no install to do ; me-tv or kaffeine have the chanels very good 2008/3/15, Timothy Parez <[EMAIL PROTECTED]>: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, The output of lspci -vvv on my computer looks like this: 04:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e500 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9202 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e600 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9202 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e700 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:00.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9202 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at e800 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- I installed v4l and now have a /dev/dvb/adapter0 directory demux0 dvr0 frontend0 net0 I should note that the items in that directory are colored yellow with black background (perhaps this is indicating something related to the problem? When I use scan I get this scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12551500 V 2200 5 >>> tune to: 12551:v:0:22000 WARNING: >>> tuning failed!!! >>> tune to: 12551:v:0:22000 (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done
Re: [linux-dvb] Nova-S-Plus scan ERROR: Initial Tuning Failed
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I've included the DMESG en lspci -vvv command outputs: DMESG: [0.00] Linux version 2.6.24-12-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu4)) #1 SMP Wed Mar 12 23:01:54 UTC 2008 (Ubuntu 2.6.24-12.22-generic) [0.00] BIOS-provided physical RAM map: [0.00] BIOS-e820: - 0009fc00 (usable) [0.00] BIOS-e820: 0009fc00 - 000a (reserved) [0.00] BIOS-e820: 000e8000 - 0010 (reserved) [0.00] BIOS-e820: 0010 - 1f7e4000 (usable) [0.00] BIOS-e820: 1f7e4000 - 2000 (reserved) [0.00] BIOS-e820: d000 - e000 (reserved) [0.00] BIOS-e820: fec0 - 0001 (reserved) [0.00] 0MB HIGHMEM available. [0.00] 503MB LOWMEM available. [0.00] found SMP MP-table at 000fe700 [0.00] Entering add_active_range(0, 0, 128996) 0 entries of 256 used [0.00] Zone PFN ranges: [0.00] DMA 0 -> 4096 [0.00] Normal 4096 -> 128996 [0.00] HighMem128996 -> 128996 [0.00] Movable zone start PFN for each node [0.00] early_node_map[1] active PFN ranges [0.00] 0:0 -> 128996 [0.00] On node 0 totalpages: 128996 [0.00] DMA zone: 32 pages used for memmap [0.00] DMA zone: 0 pages reserved [0.00] DMA zone: 4064 pages, LIFO batch:0 [0.00] Normal zone: 975 pages used for memmap [0.00] Normal zone: 123925 pages, LIFO batch:31 [0.00] HighMem zone: 0 pages used for memmap [0.00] Movable zone: 0 pages used for memmap [0.00] DMI 2.3 present. [0.00] ACPI: RSDP signature @ 0xC00E9C10 checksum 0 [0.00] ACPI: RSDP 000E9C10, 0014 (r0 COMPAQ) [0.00] ACPI: RSDT 1F7F4040, 0038 (r1 COMPAQ CPQ0968 20050825 0) [0.00] ACPI: FACP 1F7F40EC, 0074 (r1 COMPAQ GRANTSD 1 0) [0.00] ACPI: DSDT 1F7F4267, 13F3 (r1 COMPAQ DSDT1 MSFT 10E) [0.00] ACPI: FACS 1F7F4000, 0040 [0.00] ACPI: SSDT 1F7F565A, 3303 (r1 COMPAQ PROJECT1 MSFT 10E) [0.00] ACPI: APIC 1F7F4160, 0068 (r1 COMPAQ GRANTSD 1 0) [0.00] ACPI: ASF! 1F7F41C8, 0063 (r32 COMPAQ GRANTSD 1 0) [0.00] ACPI: MCFG 1F7F422B, 003C (r1 COMPAQ GRANTSD 1 0) [0.00] ACPI: DMI detected: Hewlett-Packard [0.00] ACPI: PM-Timer IO Port: 0xf808 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [0.00] Processor #0 15:4 APIC version 20 [0.00] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [0.00] Processor #1 15:4 APIC version 20 [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x01] address[0xfec0] gsi_base[0]) [0.00] IOAPIC[0]: apic_id 1, version 32, address 0xfec0, GSI 0-23 [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Enabling APIC mode: Flat. Using 1 I/O APICs [0.00] Using ACPI (MADT) for SMP configuration information [0.00] Allocating PCI resources starting at 3000 (gap: 2000:b000) [0.00] swsusp: Registered nosave memory region: 0009f000 - 000a [0.00] swsusp: Registered nosave memory region: 000a - 000e8000 [0.00] swsusp: Registered nosave memory region: 000e8000 - 0010 [0.00] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127989 [0.00] Kernel command line: root=UUID=5f4e8bd1-8131-444d-9b1f-9a8ec6768f10 ro quiet splash [0.00] mapped APIC to b000 (fee0) [0.00] mapped IOAPIC to a000 (fec0) [0.00] Enabling fast FPU save and restore... done. [0.00] Enabling unmasked SIMD FPU exception support... done. [0.00] Initializing CPU#0 [0.00] PID hash table entries: 2048 (order: 11, 8192 bytes) [0.00] Detected 3192.078 MHz processor. [ 10.578614] Console: colour VGA+ 80x25 [ 10.578618] console [tty0] enabled [ 10.578766] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.578928] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 10.586235] Memory: 499476k/515984k available (2164k kernel code, 15872k reserved, 1007k data, 364k init, 0k highmem) [ 10.586242] v
Re: [linux-dvb] Nova-S-Plus scan ERROR: Initial Tuning Failed
Hi, I put the card in a new computer and installed Ubuntu Hardy, the latest preview. The adapter is recognized so I installed dvb-utils. Then I executed scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-28.2E The result was the same WARNING >>> tuning failed! Timothy. On 16 Mar 2008, at 20:33, joris abadie wrote: Bonjour, j'ai quatre satellites sur nova-S ( Astra 19°, hotbird ... ) et tout s'est installé tout seul. Every thing is OK with HARDY no install to do ; me-tv or kaffeine have the chanels very good 2008/3/15, Timothy Parez <[EMAIL PROTECTED]>: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, The output of lspci -vvv on my computer looks like this: 04:00.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) Subsystem: Hauppauge computer works Inc. Nova-S-Plus DVB-S Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e500 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:00.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9202 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e600 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:00.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9202 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at e700 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 04:00.4 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) Subsystem: Hauppauge computer works Inc. Unknown device 9202 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at e800 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- I installed v4l and now have a /dev/dvb/adapter0 directory demux0 dvr0 frontend0 net0 I should note that the items in that directory are colored yellow with black background (perhaps this is indicating something related to the problem? When I use scan I get this scan -a 0 /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder 12551500 V 2200 5 >>> tune to: 12551:v:0:22000 WARNING: >>> tuning failed!!! >>> tune to: 12551:v:0:22000 (tuning failed) WARNING: >>> tuning failed!!! ERROR: initial tuning failed dumping lists (0 services) Done. If I connect the cable to a decoder + tv I get all the channels and perfect image. I'm using a dual / twin LNB. Dual for Astra 19.2 E and 23.5 E with 2 connectors. I did get it to work on my previous computer. Any ideas? Timothy. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.7 (Darwin) iD8DBQFH3FDS+j5y+etesF8RAldeAKDeRHdC3YqDZNBze975O5peeRjILgCeNQqV CukiOWQomn8Ctkn2ErrQMI4= =QbCX -END PGP SIGNATURE- ___ linux-dvb mailing list linux-dvb@linuxt
