On Mon, May 31, 2010 at 09:06:35AM +0200, ext Marco Stornelli wrote:
Oops, my fault. I see the error in the configuration. Thank you very
much for your response. I'll try again.
no problem.
--
balbi
DefectiveByDesign.org
--
To unsubscribe from this list: send the line "unsubscribe linux-embed
2010/5/30 Felipe Balbi :
> On Sun, May 30, 2010 at 11:53:49AM +0200, Marco Stornelli wrote:
> beagle board uses musb. You shouldn't be relying on the udc controller.
> Your Kconfig is just wrong.
>
> --
> balbi
>
Oops, my fault. I see the error in the configuration. Thank you very
much for your re
2010/5/30 Felipe Balbi :
> On Sun, May 30, 2010 at 11:53:49AM +0200, Marco Stornelli wrote:
>
> beagle board uses musb. You shouldn't be relying on the udc controller.
> Your Kconfig is just wrong.
>
> --
> balbi
>
Mmmdoes it mean that it's not possible to use g_ether driver? I
read in several
On Sun, May 30, 2010 at 11:53:49AM +0200, Marco Stornelli wrote:
> Hi,
>
> I'm using the kernel 2.6.34 with the beagle board rev. c4. I have got
> some problems with the ethernet gadget to use nfs over usb. The problem
> is with the usb. When the g_ether driver register itself, the omap udc
> driv
Hi,
I'm using the kernel 2.6.34 with the beagle board rev. c4. I have got
some problems with the ethernet gadget to use nfs over usb. The problem
is with the usb. When the g_ether driver register itself, the omap udc
driver returns ENODEV because the kernel didn't call the probe for
this driver. L
