On Mon, Oct 19, 2009 at 03:50:33PM -0500, Bill Gatliff wrote:
> Why is it that you don't find the relevant line in the FAQ until ten
> seconds after clicking ? :)
That's called an ohnosecond. : )
--
Regards,
George
--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" i
On Fri, Jun 13, 2008 at 12:02:06AM +0500, Shaz wrote:
> On Thu, Jun 12, 2008 at 11:49 PM, Enrico Weigelt <[EMAIL PROTECTED]> wrote:
> > * Bill Traynor <[EMAIL PROTECTED]> schrieb:
> >
> >> There is no "one good way". I've had decent success building Dan Kegel's
> >> "crosstool" in the past: http:/
On Thu, Jun 12, 2008 at 09:35:16PM +0200, Marcus Tangermann wrote:
> Hello,
>
> we currently try to boot a 2.6.21 kernel on a custom IXP422 based board. The
> boot loader (U-Boot) works fine so far, memory and flash test run
> successfully, the NPE is also able to ping a host. So we assume the b
On Mon, Oct 13, 2008 at 03:23:03PM +0200, Robert Schwebel wrote:
> On Mon, Oct 13, 2008 at 07:50:08AM -0500, Bill Gatliff wrote:
> > Robert Schwebel wrote:
> > > In reality, there are no real alternatives for accelerates chips.
> >
> > Would the Silicon Motion SM50x chips qualify as an alternative?
On Mon, Oct 13, 2008 at 04:09:36PM +0100, Daniel THOMPSON wrote:
> Tom Cooksey wrote:
> > Yup, I think that's what I'm going to end up having to do. Even if I can get
> > the physical address, I need some way to flush the CPU cache to RAM before I
> > ask the GPU to blit. I doubt there's any way to
Hi,
On Fri, May 15, 2009 at 02:55:57PM +0100, Ben Dooks wrote:
> On Fri, May 15, 2009 at 02:51:05PM +0100, Jamie Lokier wrote:
> > Eek, can you say a bit more about the ARM EABI mismatch?
> >
> > I would like to run a shiny modern ARM EABI kernel and userspace, but
> > also need to run one or two
