Re: [f2fs-dev] [RFC 0/5] Enable f2fs support inline data
Hi Huajun, Sorry for the long delay. I've been too busy to catch up this new big feature. Anyway, do you guys still design or focus on this issue? Nowadays, I can afford to dive into this issue. So, if you have done any progress so far, can you share it with me? Otherwise, I'd like to start to design it from the scatch. Thanks, 2013-06-08, 15:25 +0800, Huajun Li: > > Hi Jaegeuk, > Thanks for your suggestion. > > > On Wed, Jun 5, 2013 at 3:13 PM, Jaegeuk Kim > wrote: > Hi Haicheng, > > 2013-06-04 (화), 14:01 +0800, Haicheng Li: > > Hi Jaegeuk & Namjae, > > > > Sure, we'll address your comments. And this version is RFC, > just wanna to > > make sure this feature is meaningful for f2fs project, and > there is no obvious > > mistake, e.g. missing some critical path. > > > IMO, it is worth to design and implement the inline feature > though, I'd > like to review the total design before looking at trivial > mistakes. > Since if the initial design is changed frequently, we need to > review > again and again. > > Agree. So let's understand/clarify your following proposal firstly. > > > So, we need to decide the overall inline design. > Currently we have to consider three data structures at a same > time for > the on-disk *inline* inode block structure, which are data, > dentry, and > xattr as well. > > IMO, we can give three inode flags: F2FS_INLINE_DATA, > F2FS_INLINE_DENT, > and F2FS_INLINE_XATTR. > > Small data and dentries can be inline. And xattr (such as XATTR_USER, > XATTR_TRUSTED, eg. ) can be inline too, right ? > Or inline xattr is just working for inline data/dentries? > > < on-disk inode block > > - metadata > - if F2FS_INLINE_XATTR is set, > : use fixed 2*255 bytes to *cache* two xattrs for simplicity > > These 2 xattrs are working for the ones storing in xattr_nid block > before, or just providing info for inline data/dent ? > > > `- if F2FS_INLINE_DATA is set, >: use the remained space varied by F2FS_INLINE_XATTR. > `- if F2FS_INLINE_DENT is set, >: use variable number of dentries determined by > F2FS_INLINE_XATTR. > Do you mean inline dent depends on inline xattr, that is, we need a > dedicated xattr entry providing info for inline denteries, right? > > > `- Otherwise, use as pointers > > And then, we need to define how to deal with their > combinations. > > Operational conditions > -- > - use inline xattr or not, by checking other inline flags and > inline > data size. > - calculate inline data size and its offset according to the > use of > inline xattrs. > - the places of inline operaions wrt the lock consistency and > coverage > - Power-off-recovery routine should care about the on-disk > inode > structure. > - unset F2FS_INLINE_DATA if i_size = 0 > - unset F2FS_INLINE_XATTR if xattr entries = 0 > - unset F2FS_INLINE_DENT if dentries = 0 > > - what else? > - clear these flags after the inline data/dent is moved to normal data > block > - maybe we need store xattr_header while making xattr inline. > > > > Once we design the whole thing, we can make general functions > to deal > with them gracefully. > > > And if you team has some special opensource test suites used > in your daily > > f2fs test cycle, pls. kindly share the info with us, then we > can make sure our > > patchset can pass these cases before we send out next > version. > > > 1. xfstests for functionality > 2. fsstress for deadlock/consistency check > 3. power-off with fsstress > > Thanks, > > > BTW, test the kernel source tree or kernel build is a good > suggestion. thanks. > > > > On Tue, Jun 04, 2013 at 01:23:57PM +0900, Namjae Jeon wrote: > > > Hi. Huajun. > > > > > > I agree jaegeuk's opinion. > > > Additionally, It is better that you describe the effect in > change-log > > > when this feature is added to f2fs. > > > e.g. > > > 1. how much space is saved when storing > kernel-tree(small files) ? > > > 2. small files creation performance test. > > > 3. file look-up performance test. > > > 4. other performance tools 's result. > > > > > > Thanks. > > > > > > 2013/6/4 Jaegeuk Kim : > > > > Hi, > > > > > > > > Thi
Re: [f2fs-dev] [RFC 0/5] Enable f2fs support inline data
Hi, 2013-06-08 (토), 15:25 +0800, Huajun Li: > > Hi Jaegeuk, > Thanks for your suggestion. > On Wed, Jun 5, 2013 at 3:13 PM, Jaegeuk Kim > wrote: > Hi Haicheng, > 2013-06-04 (화), 14:01 +0800, Haicheng Li: > > Hi Jaegeuk & Namjae, > > > > Sure, we'll address your comments. And this version is RFC, > just wanna to > > make sure this feature is meaningful for f2fs project, and > there is no obvious > > mistake, e.g. missing some critical path. > IMO, it is worth to design and implement the inline feature > though, I'd > like to review the total design before looking at trivial > mistakes. > Since if the initial design is changed frequently, we need to > review > again and again. > > Agree. So let's understand/clarify your following proposal firstly. > So, we need to decide the overall inline design. > Currently we have to consider three data structures at a same > time for > the on-disk *inline* inode block structure, which are data, > dentry, and > xattr as well. > > IMO, we can give three inode flags: F2FS_INLINE_DATA, > F2FS_INLINE_DENT, > and F2FS_INLINE_XATTR. > > Small data and dentries can be inline. And xattr (such as XATTR_USER, > XATTR_TRUSTED, eg. ) can be inline too, right ? Right. > Or inline xattr is just working for inline data/dentries? > > < on-disk inode block > > - metadata > - if F2FS_INLINE_XATTR is set, > : use fixed 2*255 bytes to *cache* two xattrs for simplicity > > These 2 xattrs are working for the ones storing in xattr_nid block > before, or just providing info for inline data/dent ? I meant that we can store a fixed number of xattrs in the inode block like *inline* data. The number, 2, is just for example. If users give only one or two xattrs, we can store them in the inode block instead of using extra node blocks. If a system enables SELinux, it is able to set security labels to all the files according to the policy, so that we need to consider inline xattr seriously. > > > `- if F2FS_INLINE_DATA is set, >: use the remained space varied by F2FS_INLINE_XATTR. > `- if F2FS_INLINE_DENT is set, >: use variable number of dentries determined by > F2FS_INLINE_XATTR. > Do you mean inline dent depends on inline xattr, that is, we need a > dedicated xattr entry providing info for inline denteries, right? What I meant was the size of inline dentry space. We need to calculate the size for inline dentries on-the-fly as the F2FS_INLINE_XATTR is set or not. > > > `- Otherwise, use as pointers > > And then, we need to define how to deal with their > combinations. > > Operational conditions > -- > - use inline xattr or not, by checking other inline flags and > inline > data size. > - calculate inline data size and its offset according to the > use of > inline xattrs. > - the places of inline operaions wrt the lock consistency and > coverage > - Power-off-recovery routine should care about the on-disk > inode > structure. > - unset F2FS_INLINE_DATA if i_size = 0 > - unset F2FS_INLINE_XATTR if xattr entries = 0 > - unset F2FS_INLINE_DENT if dentries = 0 > > - what else? > - clear these flags after the inline data/dent is moved to normal data > block > - maybe we need store xattr_header while making xattr inline. It seems that there is nothing to store any header information. Thanks, > > Once we design the whole thing, we can make general functions > to deal > with them gracefully. > > > And if you team has some special opensource test suites used > in your daily > > f2fs test cycle, pls. kindly share the info with us, then we > can make sure our > > patchset can pass these cases before we send out next > version. > > > 1. xfstests for functionality > 2. fsstress for deadlock/consistency check > 3. power-off with fsstress > > Thanks, > > > BTW, test the kernel source tree or kernel build is a good > suggestion. thanks. > > > > On Tue, Jun 04, 2013 at 01:23:57PM +0900, Namjae Jeon wrote: > > > Hi. Huajun. > > > > > > I agree jaegeuk's opinion. > > > Additionally, It is better that you describe the effect in > change-log > > > when this feature is added to f2fs. > > > e.g. > > > 1. how much space is saved when storing > kernel-tree(small files) ? > > > 2. small files creation performanc
Re: [f2fs-dev] [RFC 0/5] Enable f2fs support inline data
Hi Jaegeuk, Thanks for your suggestion. On Wed, Jun 5, 2013 at 3:13 PM, Jaegeuk Kim wrote: > Hi Haicheng, > > 2013-06-04 (화), 14:01 +0800, Haicheng Li: > > Hi Jaegeuk & Namjae, > > > > Sure, we'll address your comments. And this version is RFC, just wanna to > > make sure this feature is meaningful for f2fs project, and there is no > obvious > > mistake, e.g. missing some critical path. > > IMO, it is worth to design and implement the inline feature though, I'd > like to review the total design before looking at trivial mistakes. > Since if the initial design is changed frequently, we need to review > again and again. > > Agree. So let's understand/clarify your following proposal firstly. > So, we need to decide the overall inline design. > Currently we have to consider three data structures at a same time for > the on-disk *inline* inode block structure, which are data, dentry, and > xattr as well. > > IMO, we can give three inode flags: F2FS_INLINE_DATA, F2FS_INLINE_DENT, > and F2FS_INLINE_XATTR. > > Small data and dentries can be inline. And xattr (such as XATTR_USER, XATTR_TRUSTED, eg. ) can be inline too, right ? Or inline xattr is just working for inline data/dentries? > < on-disk inode block > > - metadata > - if F2FS_INLINE_XATTR is set, > : use fixed 2*255 bytes to *cache* two xattrs for simplicity > These 2 xattrs are working for the ones storing in xattr_nid block before, or just providing info for inline data/dent ? `- if F2FS_INLINE_DATA is set, >: use the remained space varied by F2FS_INLINE_XATTR. > `- if F2FS_INLINE_DENT is set, >: use variable number of dentries determined by F2FS_INLINE_XATTR. > Do you mean inline dent depends on inline xattr, that is, we need a dedicated xattr entry providing info for inline denteries, right? > `- Otherwise, use as pointers > > And then, we need to define how to deal with their combinations. > > Operational conditions > -- > - use inline xattr or not, by checking other inline flags and inline > data size. > - calculate inline data size and its offset according to the use of > inline xattrs. > - the places of inline operaions wrt the lock consistency and coverage > - Power-off-recovery routine should care about the on-disk inode > structure. > - unset F2FS_INLINE_DATA if i_size = 0 > - unset F2FS_INLINE_XATTR if xattr entries = 0 > - unset F2FS_INLINE_DENT if dentries = 0 > > - what else? > - clear these flags after the inline data/dent is moved to normal data block - maybe we need store xattr_header while making xattr inline. > Once we design the whole thing, we can make general functions to deal > with them gracefully. > > > And if you team has some special opensource test suites used in your > daily > > f2fs test cycle, pls. kindly share the info with us, then we can make > sure our > > patchset can pass these cases before we send out next version. > > 1. xfstests for functionality > 2. fsstress for deadlock/consistency check > 3. power-off with fsstress > > Thanks, > > > BTW, test the kernel source tree or kernel build is a good suggestion. > thanks. > > > > On Tue, Jun 04, 2013 at 01:23:57PM +0900, Namjae Jeon wrote: > > > Hi. Huajun. > > > > > > I agree jaegeuk's opinion. > > > Additionally, It is better that you describe the effect in change-log > > > when this feature is added to f2fs. > > > e.g. > > > 1. how much space is saved when storing kernel-tree(small files) ? > > > 2. small files creation performance test. > > > 3. file look-up performance test. > > > 4. other performance tools 's result. > > > > > > Thanks. > > > > > > 2013/6/4 Jaegeuk Kim : > > > > Hi, > > > > > > > > This feature is one of my todo items. ;) > > > > Thank you for the contribution. > > > > > > > > Before reviewing the below code intensively, we need to check the > > > > following issues. > > > > > > > > - deadlock conditions > > > > - FS consistency > > > > - recovery routine > > > > > > > > Could you check one more time? > > > > Thanks again, > > > > > > > > 2013-06-03 (월), 18:04 +0800, Huajun Li: > > > >> f2fs inode is so large, small files can be stored directly in the > inode, > > > >> rather than just storing a single block address and storing the > data elsewhere. > > > >> > > > >> This RFC patch set is just to enable f2fs support inline data: > files less than > > > >> about 3.6K can be stored directly in inode block. > > > >> > > > >> TODO: make small dirs inline too. > > > >> > > > >> > > > >> Haicheng Li (3): > > > >> f2fs: Add helper functions and flag to support inline data > > > >> f2fs: Add interface for inline data support > > > >> f2fs: add tracepoints to debug inline data operations > > > >> > > > >> Huajun Li (2): > > > >> f2fs: Handle inline data read and write > > > >> f2fs: Key functions to handle inline data > > > >> > > > >> fs/f2fs/Kconfig | 10 +++ > > > >> fs/f2fs/Makefile|1 + > > > >> fs/f2fs/data.c | 78 +
Re: [f2fs-dev] [RFC 0/5] Enable f2fs support inline data
Hi Haicheng, 2013-06-04 (화), 14:01 +0800, Haicheng Li: > Hi Jaegeuk & Namjae, > > Sure, we'll address your comments. And this version is RFC, just wanna to > make sure this feature is meaningful for f2fs project, and there is no obvious > mistake, e.g. missing some critical path. IMO, it is worth to design and implement the inline feature though, I'd like to review the total design before looking at trivial mistakes. Since if the initial design is changed frequently, we need to review again and again. So, we need to decide the overall inline design. Currently we have to consider three data structures at a same time for the on-disk *inline* inode block structure, which are data, dentry, and xattr as well. IMO, we can give three inode flags: F2FS_INLINE_DATA, F2FS_INLINE_DENT, and F2FS_INLINE_XATTR. < on-disk inode block > - metadata - if F2FS_INLINE_XATTR is set, : use fixed 2*255 bytes to *cache* two xattrs for simplicity `- if F2FS_INLINE_DATA is set, : use the remained space varied by F2FS_INLINE_XATTR. `- if F2FS_INLINE_DENT is set, : use variable number of dentries determined by F2FS_INLINE_XATTR. `- Otherwise, use as pointers And then, we need to define how to deal with their combinations. Operational conditions -- - use inline xattr or not, by checking other inline flags and inline data size. - calculate inline data size and its offset according to the use of inline xattrs. - the places of inline operaions wrt the lock consistency and coverage - Power-off-recovery routine should care about the on-disk inode structure. - unset F2FS_INLINE_DATA if i_size = 0 - unset F2FS_INLINE_XATTR if xattr entries = 0 - unset F2FS_INLINE_DENT if dentries = 0 - what else? Once we design the whole thing, we can make general functions to deal with them gracefully. > And if you team has some special opensource test suites used in your daily > f2fs test cycle, pls. kindly share the info with us, then we can make sure our > patchset can pass these cases before we send out next version. 1. xfstests for functionality 2. fsstress for deadlock/consistency check 3. power-off with fsstress Thanks, > BTW, test the kernel source tree or kernel build is a good suggestion. thanks. > > On Tue, Jun 04, 2013 at 01:23:57PM +0900, Namjae Jeon wrote: > > Hi. Huajun. > > > > I agree jaegeuk's opinion. > > Additionally, It is better that you describe the effect in change-log > > when this feature is added to f2fs. > > e.g. > > 1. how much space is saved when storing kernel-tree(small files) ? > > 2. small files creation performance test. > > 3. file look-up performance test. > > 4. other performance tools 's result. > > > > Thanks. > > > > 2013/6/4 Jaegeuk Kim : > > > Hi, > > > > > > This feature is one of my todo items. ;) > > > Thank you for the contribution. > > > > > > Before reviewing the below code intensively, we need to check the > > > following issues. > > > > > > - deadlock conditions > > > - FS consistency > > > - recovery routine > > > > > > Could you check one more time? > > > Thanks again, > > > > > > 2013-06-03 (월), 18:04 +0800, Huajun Li: > > >> f2fs inode is so large, small files can be stored directly in the inode, > > >> rather than just storing a single block address and storing the data > > >> elsewhere. > > >> > > >> This RFC patch set is just to enable f2fs support inline data: files > > >> less than > > >> about 3.6K can be stored directly in inode block. > > >> > > >> TODO: make small dirs inline too. > > >> > > >> > > >> Haicheng Li (3): > > >> f2fs: Add helper functions and flag to support inline data > > >> f2fs: Add interface for inline data support > > >> f2fs: add tracepoints to debug inline data operations > > >> > > >> Huajun Li (2): > > >> f2fs: Handle inline data read and write > > >> f2fs: Key functions to handle inline data > > >> > > >> fs/f2fs/Kconfig | 10 +++ > > >> fs/f2fs/Makefile|1 + > > >> fs/f2fs/data.c | 78 +- > > >> fs/f2fs/f2fs.h | 70 +++ > > >> fs/f2fs/file.c |9 ++- > > >> fs/f2fs/inline.c| 156 > > >> +++ > > >> fs/f2fs/inode.c |8 +++ > > >> include/linux/f2fs_fs.h |5 ++ > > >> include/trace/events/f2fs.h | 69 +++ > > >> 9 files changed, 402 insertions(+), 4 deletions(-) > > >> create mode 100644 fs/f2fs/inline.c > > >> > > > > > > -- > > > Jaegeuk Kim > > > Samsung > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Jaegeuk Kim Samsung signature.asc Description: This is a digitally signed message part -- How ServiceNow helps IT people transform IT de
Re: [f2fs-dev] [RFC 0/5] Enable f2fs support inline data
Hi Jaegeuk & Namjae, Sure, we'll address your comments. And this version is RFC, just wanna to make sure this feature is meaningful for f2fs project, and there is no obvious mistake, e.g. missing some critical path. And if you team has some special opensource test suites used in your daily f2fs test cycle, pls. kindly share the info with us, then we can make sure our patchset can pass these cases before we send out next version. BTW, test the kernel source tree or kernel build is a good suggestion. thanks. On Tue, Jun 04, 2013 at 01:23:57PM +0900, Namjae Jeon wrote: > Hi. Huajun. > > I agree jaegeuk's opinion. > Additionally, It is better that you describe the effect in change-log > when this feature is added to f2fs. > e.g. > 1. how much space is saved when storing kernel-tree(small files) ? > 2. small files creation performance test. > 3. file look-up performance test. > 4. other performance tools 's result. > > Thanks. > > 2013/6/4 Jaegeuk Kim : > > Hi, > > > > This feature is one of my todo items. ;) > > Thank you for the contribution. > > > > Before reviewing the below code intensively, we need to check the > > following issues. > > > > - deadlock conditions > > - FS consistency > > - recovery routine > > > > Could you check one more time? > > Thanks again, > > > > 2013-06-03 (월), 18:04 +0800, Huajun Li: > >> f2fs inode is so large, small files can be stored directly in the inode, > >> rather than just storing a single block address and storing the data > >> elsewhere. > >> > >> This RFC patch set is just to enable f2fs support inline data: files less > >> than > >> about 3.6K can be stored directly in inode block. > >> > >> TODO: make small dirs inline too. > >> > >> > >> Haicheng Li (3): > >> f2fs: Add helper functions and flag to support inline data > >> f2fs: Add interface for inline data support > >> f2fs: add tracepoints to debug inline data operations > >> > >> Huajun Li (2): > >> f2fs: Handle inline data read and write > >> f2fs: Key functions to handle inline data > >> > >> fs/f2fs/Kconfig | 10 +++ > >> fs/f2fs/Makefile|1 + > >> fs/f2fs/data.c | 78 +- > >> fs/f2fs/f2fs.h | 70 +++ > >> fs/f2fs/file.c |9 ++- > >> fs/f2fs/inline.c| 156 > >> +++ > >> fs/f2fs/inode.c |8 +++ > >> include/linux/f2fs_fs.h |5 ++ > >> include/trace/events/f2fs.h | 69 +++ > >> 9 files changed, 402 insertions(+), 4 deletions(-) > >> create mode 100644 fs/f2fs/inline.c > >> > > > > -- > > Jaegeuk Kim > > Samsung > -- > To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- How ServiceNow helps IT people transform IT departments: 1. A cloud service to automate IT design, transition and operations 2. Dashboards that offer high-level views of enterprise services 3. A single system of record for all IT processes http://p.sf.net/sfu/servicenow-d2d-j ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [RFC 0/5] Enable f2fs support inline data
Hi. Huajun. I agree jaegeuk's opinion. Additionally, It is better that you describe the effect in change-log when this feature is added to f2fs. e.g. 1. how much space is saved when storing kernel-tree(small files) ? 2. small files creation performance test. 3. file look-up performance test. 4. other performance tools 's result. Thanks. 2013/6/4 Jaegeuk Kim : > Hi, > > This feature is one of my todo items. ;) > Thank you for the contribution. > > Before reviewing the below code intensively, we need to check the > following issues. > > - deadlock conditions > - FS consistency > - recovery routine > > Could you check one more time? > Thanks again, > > 2013-06-03 (월), 18:04 +0800, Huajun Li: >> f2fs inode is so large, small files can be stored directly in the inode, >> rather than just storing a single block address and storing the data >> elsewhere. >> >> This RFC patch set is just to enable f2fs support inline data: files less >> than >> about 3.6K can be stored directly in inode block. >> >> TODO: make small dirs inline too. >> >> >> Haicheng Li (3): >> f2fs: Add helper functions and flag to support inline data >> f2fs: Add interface for inline data support >> f2fs: add tracepoints to debug inline data operations >> >> Huajun Li (2): >> f2fs: Handle inline data read and write >> f2fs: Key functions to handle inline data >> >> fs/f2fs/Kconfig | 10 +++ >> fs/f2fs/Makefile|1 + >> fs/f2fs/data.c | 78 +- >> fs/f2fs/f2fs.h | 70 +++ >> fs/f2fs/file.c |9 ++- >> fs/f2fs/inline.c| 156 >> +++ >> fs/f2fs/inode.c |8 +++ >> include/linux/f2fs_fs.h |5 ++ >> include/trace/events/f2fs.h | 69 +++ >> 9 files changed, 402 insertions(+), 4 deletions(-) >> create mode 100644 fs/f2fs/inline.c >> > > -- > Jaegeuk Kim > Samsung -- How ServiceNow helps IT people transform IT departments: 1. A cloud service to automate IT design, transition and operations 2. Dashboards that offer high-level views of enterprise services 3. A single system of record for all IT processes http://p.sf.net/sfu/servicenow-d2d-j ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
Re: [f2fs-dev] [RFC 0/5] Enable f2fs support inline data
Hi, This feature is one of my todo items. ;) Thank you for the contribution. Before reviewing the below code intensively, we need to check the following issues. - deadlock conditions - FS consistency - recovery routine Could you check one more time? Thanks again, 2013-06-03 (월), 18:04 +0800, Huajun Li: > f2fs inode is so large, small files can be stored directly in the inode, > rather than just storing a single block address and storing the data > elsewhere. > > This RFC patch set is just to enable f2fs support inline data: files less than > about 3.6K can be stored directly in inode block. > > TODO: make small dirs inline too. > > > Haicheng Li (3): > f2fs: Add helper functions and flag to support inline data > f2fs: Add interface for inline data support > f2fs: add tracepoints to debug inline data operations > > Huajun Li (2): > f2fs: Handle inline data read and write > f2fs: Key functions to handle inline data > > fs/f2fs/Kconfig | 10 +++ > fs/f2fs/Makefile|1 + > fs/f2fs/data.c | 78 +- > fs/f2fs/f2fs.h | 70 +++ > fs/f2fs/file.c |9 ++- > fs/f2fs/inline.c| 156 > +++ > fs/f2fs/inode.c |8 +++ > include/linux/f2fs_fs.h |5 ++ > include/trace/events/f2fs.h | 69 +++ > 9 files changed, 402 insertions(+), 4 deletions(-) > create mode 100644 fs/f2fs/inline.c > -- Jaegeuk Kim Samsung signature.asc Description: This is a digitally signed message part -- How ServiceNow helps IT people transform IT departments: 1. A cloud service to automate IT design, transition and operations 2. Dashboards that offer high-level views of enterprise services 3. A single system of record for all IT processes http://p.sf.net/sfu/servicenow-d2d-j___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
[f2fs-dev] [RFC 0/5] Enable f2fs support inline data
f2fs inode is so large, small files can be stored directly in the inode, rather than just storing a single block address and storing the data elsewhere. This RFC patch set is just to enable f2fs support inline data: files less than about 3.6K can be stored directly in inode block. TODO: make small dirs inline too. Haicheng Li (3): f2fs: Add helper functions and flag to support inline data f2fs: Add interface for inline data support f2fs: add tracepoints to debug inline data operations Huajun Li (2): f2fs: Handle inline data read and write f2fs: Key functions to handle inline data fs/f2fs/Kconfig | 10 +++ fs/f2fs/Makefile|1 + fs/f2fs/data.c | 78 +- fs/f2fs/f2fs.h | 70 +++ fs/f2fs/file.c |9 ++- fs/f2fs/inline.c| 156 +++ fs/f2fs/inode.c |8 +++ include/linux/f2fs_fs.h |5 ++ include/trace/events/f2fs.h | 69 +++ 9 files changed, 402 insertions(+), 4 deletions(-) create mode 100644 fs/f2fs/inline.c -- 1.7.9.5 -- Get 100% visibility into Java/.NET code with AppDynamics Lite It's a free troubleshooting tool designed for production Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap2 ___ Linux-f2fs-devel mailing list Linux-f2fs-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel