Re: [PATCH 2/2] hwmon: (ucd9000) Add debugfs attributes to provide mfr_status
On 03/13/2018 02:29 PM, Guenter Roeck wrote: On Tue, Mar 13, 2018 at 02:01:51PM -0500, Eddie James wrote: On 03/10/2018 10:50 AM, Guenter Roeck wrote: On 03/09/2018 11:19 AM, Eddie James wrote: From: Christopher BosticExpose the gpiN_fault fields of mfr_status as individual debugfs attributes. This provides a way for users to be easily notified of gpi faults. Also provide the whole mfr_status register in debugfs. Signed-off-by: Christopher Bostic Signed-off-by: Andrew Jeffery Signed-off-by: Eddie James --- drivers/hwmon/pmbus/ucd9000.c | 172 +- 1 file changed, 171 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index e3a507f..297da0e 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -36,6 +37,7 @@ #define UCD9000_NUM_PAGES 0xd6 #define UCD9000_FAN_CONFIG_INDEX 0xe7 #define UCD9000_FAN_CONFIG 0xe8 +#define UCD9000_MFR_STATUS 0xf3 #define UCD9000_GPIO_SELECT 0xfa #define UCD9000_GPIO_CONFIG 0xfb #define UCD9000_DEVICE_ID 0xfd @@ -63,13 +65,22 @@ #define UCD901XX_NUM_GPIOS 26 #define UCD90910_NUM_GPIOS 26 +#define UCD9000_DEBUGFS_NAME_LEN 24 +#define UCD9000_GPI_COUNT 8 + struct ucd9000_data { u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; struct pmbus_driver_info info; struct gpio_chip gpio; + struct dentry *debugfs; }; #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) +struct ucd9000_debugfs_entry { + struct i2c_client *client; + u8 index; +}; + static int ucd9000_get_fan_config(struct i2c_client *client, int fan) { int fan_config = 0; @@ -328,6 +339,156 @@ static int ucd9000_gpio_direction_output(struct gpio_chip *gc, val); } +#if IS_ENABLED(CONFIG_DEBUG_FS) +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) +{ + int ret = pmbus_set_page(client, 0); + + if (ret < 0) + return ret; + + /* + * With the ucd90120 and ucd90124 devices, this command [MFR_STATUS] + * is 2 bytes long (bits 0-15). With the ucd90240 this command is 5 + * bytes long. With all other devices, it is 4 bytes long. + */ + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); +} + +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) +{ + struct ucd9000_debugfs_entry *entry = data; + struct i2c_client *client = entry->client; + u8 buffer[4]; + int ret; + + /* + * This attribute is only created for devices that return 4 bytes for + * status_mfr, so it's safe to call with 4-byte buffer. + */ + ret = ucd9000_get_mfr_status(client, buffer); + if (ret < 0) { + dev_err(>dev, "Failed to read mfr status. rc:%d\n", + ret); + + return ret; + } + + /* + * Attribute only created for devices with gpi fault bits at bits + * 16-23, which is the second byte of the response. + */ + *val = !!(buffer[1] & BIT(entry->index)); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, + ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); + +static int ucd9000_debugfs_show_mfr_status_word2(void *data, u64 *val) +{ + struct i2c_client *client = data; + __be16 buffer; + int ret; + + ret = ucd9000_get_mfr_status(client, (u8 *)); + if (ret < 0) { + dev_err(>dev, "Failed to read mfr status. rc:%d\n", + ret); + + return ret; + } + + *val = be16_to_cpu(buffer); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_word2, + ucd9000_debugfs_show_mfr_status_word2, NULL, + "%04llx\n"); + +static int ucd9000_debugfs_show_mfr_status_word4(void *data, u64 *val) +{ + struct i2c_client *client = data; + __be32 buffer; + int ret; + + ret = ucd9000_get_mfr_status(client, (u8 *)); + if (ret < 0) { + dev_err(>dev, "Failed to read mfr status. rc:%d\n", + ret); + + return ret; + } + + *val = be32_to_cpu(buffer); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_word4, + ucd9000_debugfs_show_mfr_status_word4, NULL, + "%08llx\n"); + +static int ucd9000_init_debugfs(struct i2c_client *client, + const struct i2c_device_id *mid, + struct ucd9000_data *data) +{ + struct dentry *debugfs; + struct ucd9000_debugfs_entry *entries; + int i; + char name[UCD9000_DEBUGFS_NAME_LEN]; + + debugfs = pmbus_get_debugfs_dir(client); + if (!debugfs) + return -ENOENT; + +
Re: [PATCH 2/2] hwmon: (ucd9000) Add debugfs attributes to provide mfr_status
On Tue, Mar 13, 2018 at 02:01:51PM -0500, Eddie James wrote: > > > On 03/10/2018 10:50 AM, Guenter Roeck wrote: > >On 03/09/2018 11:19 AM, Eddie James wrote: > >>From: Christopher Bostic> >> > >>Expose the gpiN_fault fields of mfr_status as individual debugfs > >>attributes. This provides a way for users to be easily notified of gpi > >>faults. Also provide the whole mfr_status register in debugfs. > >> > >>Signed-off-by: Christopher Bostic > >>Signed-off-by: Andrew Jeffery > >>Signed-off-by: Eddie James > >>--- > >> drivers/hwmon/pmbus/ucd9000.c | 172 > >>+- > >> 1 file changed, 171 insertions(+), 1 deletion(-) > >> > >>diff --git a/drivers/hwmon/pmbus/ucd9000.c > >>b/drivers/hwmon/pmbus/ucd9000.c > >>index e3a507f..297da0e 100644 > >>--- a/drivers/hwmon/pmbus/ucd9000.c > >>+++ b/drivers/hwmon/pmbus/ucd9000.c > >>@@ -19,6 +19,7 @@ > >> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > >> */ > >> +#include > >> #include > >> #include > >> #include > >>@@ -36,6 +37,7 @@ > >> #define UCD9000_NUM_PAGES 0xd6 > >> #define UCD9000_FAN_CONFIG_INDEX 0xe7 > >> #define UCD9000_FAN_CONFIG 0xe8 > >>+#define UCD9000_MFR_STATUS 0xf3 > >> #define UCD9000_GPIO_SELECT 0xfa > >> #define UCD9000_GPIO_CONFIG 0xfb > >> #define UCD9000_DEVICE_ID 0xfd > >>@@ -63,13 +65,22 @@ > >> #define UCD901XX_NUM_GPIOS 26 > >> #define UCD90910_NUM_GPIOS 26 > >> +#define UCD9000_DEBUGFS_NAME_LEN 24 > >>+#define UCD9000_GPI_COUNT 8 > >>+ > >> struct ucd9000_data { > >> u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; > >> struct pmbus_driver_info info; > >> struct gpio_chip gpio; > >>+ struct dentry *debugfs; > >> }; > >> #define to_ucd9000_data(_info) container_of(_info, struct > >>ucd9000_data, info) > >> +struct ucd9000_debugfs_entry { > >>+ struct i2c_client *client; > >>+ u8 index; > >>+}; > >>+ > >> static int ucd9000_get_fan_config(struct i2c_client *client, int fan) > >> { > >> int fan_config = 0; > >>@@ -328,6 +339,156 @@ static int ucd9000_gpio_direction_output(struct > >>gpio_chip *gc, > >> val); > >> } > >> +#if IS_ENABLED(CONFIG_DEBUG_FS) > >>+static int ucd9000_get_mfr_status(struct i2c_client *client, u8 > >>*buffer) > >>+{ > >>+ int ret = pmbus_set_page(client, 0); > >>+ > >>+ if (ret < 0) > >>+ return ret; > >>+ > >>+ /* > >>+ * With the ucd90120 and ucd90124 devices, this command > >>[MFR_STATUS] > >>+ * is 2 bytes long (bits 0-15). With the ucd90240 this command is > >>5 > >>+ * bytes long. With all other devices, it is 4 bytes long. > >>+ */ > >>+ return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, > >>buffer); > >>+} > >>+ > >>+static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) > >>+{ > >>+ struct ucd9000_debugfs_entry *entry = data; > >>+ struct i2c_client *client = entry->client; > >>+ u8 buffer[4]; > >>+ int ret; > >>+ > >>+ /* > >>+ * This attribute is only created for devices that return 4 bytes > >>for > >>+ * status_mfr, so it's safe to call with 4-byte buffer. > >>+ */ > >>+ ret = ucd9000_get_mfr_status(client, buffer); > >>+ if (ret < 0) { > >>+ dev_err(>dev, "Failed to read mfr status. rc:%d\n", > >>+ ret); > >>+ > >>+ return ret; > >>+ } > >>+ > >>+ /* > >>+ * Attribute only created for devices with gpi fault bits at bits > >>+ * 16-23, which is the second byte of the response. > >>+ */ > >>+ *val = !!(buffer[1] & BIT(entry->index)); > >>+ > >>+ return 0; > >>+} > >>+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, > >>+ ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); > >>+ > >>+static int ucd9000_debugfs_show_mfr_status_word2(void *data, u64 *val) > >>+{ > >>+ struct i2c_client *client = data; > >>+ __be16 buffer; > >>+ int ret; > >>+ > >>+ ret = ucd9000_get_mfr_status(client, (u8 *)); > >>+ if (ret < 0) { > >>+ dev_err(>dev, "Failed to read mfr status. rc:%d\n", > >>+ ret); > >>+ > >>+ return ret; > >>+ } > >>+ > >>+ *val = be16_to_cpu(buffer); > >>+ > >>+ return 0; > >>+} > >>+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_word2, > >>+ ucd9000_debugfs_show_mfr_status_word2, NULL, > >>+ "%04llx\n"); > >>+ > >>+static int ucd9000_debugfs_show_mfr_status_word4(void *data, u64 *val) > >>+{ > >>+ struct i2c_client *client = data; > >>+ __be32 buffer; > >>+ int ret; > >>+ > >>+ ret = ucd9000_get_mfr_status(client, (u8 *)); > >>+ if (ret < 0) { > >>+ dev_err(>dev, "Failed to read mfr status. rc:%d\n", > >>+ ret); > >>+ > >>+ return ret; > >>+ } > >>+ > >>+ *val = be32_to_cpu(buffer); > >>+ > >>+ return 0; > >>+} >
Re: [PATCH 2/2] hwmon: (ucd9000) Add debugfs attributes to provide mfr_status
On 03/09/2018 11:19 AM, Eddie James wrote: From: Christopher BosticExpose the gpiN_fault fields of mfr_status as individual debugfs attributes. This provides a way for users to be easily notified of gpi faults. Also provide the whole mfr_status register in debugfs. Signed-off-by: Christopher Bostic Signed-off-by: Andrew Jeffery Signed-off-by: Eddie James --- drivers/hwmon/pmbus/ucd9000.c | 172 +- 1 file changed, 171 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index e3a507f..297da0e 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -19,6 +19,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -36,6 +37,7 @@ #define UCD9000_NUM_PAGES 0xd6 #define UCD9000_FAN_CONFIG_INDEX 0xe7 #define UCD9000_FAN_CONFIG0xe8 +#define UCD9000_MFR_STATUS 0xf3 #define UCD9000_GPIO_SELECT 0xfa #define UCD9000_GPIO_CONFIG 0xfb #define UCD9000_DEVICE_ID 0xfd @@ -63,13 +65,22 @@ #define UCD901XX_NUM_GPIOS26 #define UCD90910_NUM_GPIOS26 +#define UCD9000_DEBUGFS_NAME_LEN 24 +#define UCD9000_GPI_COUNT 8 + struct ucd9000_data { u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; struct pmbus_driver_info info; struct gpio_chip gpio; + struct dentry *debugfs; }; #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) +struct ucd9000_debugfs_entry { + struct i2c_client *client; + u8 index; +}; + static int ucd9000_get_fan_config(struct i2c_client *client, int fan) { int fan_config = 0; @@ -328,6 +339,156 @@ static int ucd9000_gpio_direction_output(struct gpio_chip *gc, val); } +#if IS_ENABLED(CONFIG_DEBUG_FS) +static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer) +{ + int ret = pmbus_set_page(client, 0); + + if (ret < 0) + return ret; + + /* +* With the ucd90120 and ucd90124 devices, this command [MFR_STATUS] +* is 2 bytes long (bits 0-15). With the ucd90240 this command is 5 +* bytes long. With all other devices, it is 4 bytes long. +*/ + return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer); +} + +static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val) +{ + struct ucd9000_debugfs_entry *entry = data; + struct i2c_client *client = entry->client; + u8 buffer[4]; + int ret; + + /* +* This attribute is only created for devices that return 4 bytes for +* status_mfr, so it's safe to call with 4-byte buffer. +*/ + ret = ucd9000_get_mfr_status(client, buffer); + if (ret < 0) { + dev_err(>dev, "Failed to read mfr status. rc:%d\n", + ret); + + return ret; + } + + /* +* Attribute only created for devices with gpi fault bits at bits +* 16-23, which is the second byte of the response. +*/ + *val = !!(buffer[1] & BIT(entry->index)); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit, +ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n"); + +static int ucd9000_debugfs_show_mfr_status_word2(void *data, u64 *val) +{ + struct i2c_client *client = data; + __be16 buffer; + int ret; + + ret = ucd9000_get_mfr_status(client, (u8 *)); + if (ret < 0) { + dev_err(>dev, "Failed to read mfr status. rc:%d\n", + ret); + + return ret; + } + + *val = be16_to_cpu(buffer); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_word2, +ucd9000_debugfs_show_mfr_status_word2, NULL, +"%04llx\n"); + +static int ucd9000_debugfs_show_mfr_status_word4(void *data, u64 *val) +{ + struct i2c_client *client = data; + __be32 buffer; + int ret; + + ret = ucd9000_get_mfr_status(client, (u8 *)); + if (ret < 0) { + dev_err(>dev, "Failed to read mfr status. rc:%d\n", + ret); + + return ret; + } + + *val = be32_to_cpu(buffer); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_word4, +ucd9000_debugfs_show_mfr_status_word4, NULL, +"%08llx\n"); + +static int ucd9000_init_debugfs(struct i2c_client *client, + const struct i2c_device_id *mid, + struct ucd9000_data *data) +{ + struct dentry *debugfs; + struct