On Mon, Oct 07, 2019 at 08:47:03PM +0000, Tremblay, Eric wrote:
> dt-bindings: Add TMP512/513 documentation
>
> Add documentation for TMP512/513 sensor chips
>
Since this is the devicetree documentation, it will need to be approved by
a devicetree maintainer. Wondering why that didn't happen, I just realized
what you did not copy the devicetree mailing list. Please do that when you
resend.
Note that they may require devicetree documentation in yaml format nowadays.
Guenter
> Signed-off-by: Eric Tremblay <etremb...@distech-controls.com>
> ---
> .../devicetree/bindings/hwmon/tmp513.txt | 32 +++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/tmp513.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/tmp513.txt
> b/Documentation/devicetree/bindings/hwmon/tmp513.txt
> new file mode 100644
> index 000000000000..dbfade74f6b1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/tmp513.txt
> @@ -0,0 +1,32 @@
> +TMP513 system monitor sensor
> +-------------------------
> +
> +Require node properties:
> +- compatible: one of
> + "ti,tmp512"
> + "ti,tmp513"
> +- reg : the I2C address of the device. This is 0x5c, 0x5d, 0x5e, or 0x5f.
> +
> +Optional properties:
> +- shunt-resistor-uohm : The shunt resistor value in uOhm. If 0, the
> calibration process
> + will be skiped and the current and power measurement engine
> will not work.
> + Temperature and voltage measurement will continue to work. The
> shunt value also
> + need to respect : rshunt <= pga-gain * 40 * 1000 * 1000. If
> not, it's not possible
> + to compute a valid calibration value. Default to 1000 uOhm.
> +- pga-gain: The gain value for the PGA function. This is 8, 4, 2 or 1.
> Default to 8.
> + The PGA gain affect the shunt voltage range.
> + The range will be equal to: pga-gain * 40mV.
> +- bus-voltage-range: 32V or 16V, default to 32V.
> +- nfactor: u8 array of three(TMP513) or two(TMP512) n-Factor value for each
> remote
> + temperature channel. Default to 0.
> + See datasheet Table 11 for n-Factor range list and value
> interpretation.
> +
> +Example:
> + tmp513@5c {
> + compatible = "ti,tmp513";
> + reg = <0x5C>;
> + shunt-resistor-uohm = <330000>;
> + bus-voltage-range = <32>;
> + pga-gain = <8>;
> + nfactor = [01 F3 00];
> + };
