On Saturday 27 August 2011 04:41 AM, Kevin Hilman wrote:
Shubhrajyoti D<shubhrajy...@ti.com> writes:- The reset in the driver at init is not needed anymore as the hwmod framework takes care of reseting it. - Reset is removed from omap_i2c_init, which was called not only during probe, but also after time out and error handling. device_reset were added in those places to effect the reset. - Earlier the hwmod SYSC settings were over-written in the driver. Removing the same and letting the hwmod take care of the settings. - Clean up the SYSS_RESETDONE_MASK macro as it is no longer needed. - Clean up the SYSCONFIG SYSC bit defination macros. - Fix the typos in wakeup. Signed-off-by: Shubhrajyoti D<shubhrajy...@ti.com>I asked this in an earlier version, but here it is again. Are you sure a full IP reset is needed on the timeout and error conditions and not just the module-level one done by: omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); [ and later... ] /* Take the I2C module out of reset: */ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); I kind of suspect that the IP rese was done because the omap_i2c_init() function was callled under the timeout/error conditions, but that a full IP SW reset is a bit heavy handed.
My idea is that case of lockup in error path it could be helpful. We internally had a discussion on this https://gforge01.dal.design.ti.com/gf/project/opbu_mail_arcv/mailman/?action=ListThreads&mailman_id=218&_forum_action=ForumMessageBrowse&thread_id=12483
Kevin
-- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
