On Fri, Nov 25, 2011 at 09:15:20AM +0800, Shawn Guo wrote:
> On Thu, Nov 24, 2011 at 09:37:47AM +0100, Wolfram Sang wrote:
> > On Thu, Nov 24, 2011 at 09:29:03AM +0100, Uwe Kleine-König wrote:
> > > Hello Shawn,
> > >
> > > On Thu, Nov 24, 2011 at 03:52:20PM +0800, Shawn Guo wrote:
> > > > CC
Am 24.11.2011 12:02, schrieb David Jander:
>
> Hi all,
>
> I was debugging an I2C bus connected to a i2c-imx peripheral as master, with
> several slaves connected to it, when I realized that this driver (and many
> (all?) others) cannot recover from a bus fault in a graceful manner.
> If, for ins
When adding checks for ACPI resource conflicts to many bus drivers,
not enough attention was paid to the error paths, and for several
drivers this causes 0 to be returned on error in some cases. Fix this
by properly returning a non-zero value on every error.
Signed-off-by: Jean Delvare
Cc: sta...
From: "corentin.labbe"
The i2c-ali1535 driver don't work on SPARC, this is because it assumes that
ioport address are 16bits wide (address stored with an unsigned short).
But on SPARC arch, ioports are mapped in memory and so are stored with an
unsigned long.
This patch corrects this by using
Hi,
I've tested this driver on a 2.6.38 kernel with several i2c clients
(temp-sensor, audio-codec, touchscreen-controller, w1-bridge,
io-expanders) and works without problems. SoC: at91sam9g45
Because of the 2.6.38 kernel, I had to skip "[PATCH v7 2/5] Replace
clk_lookup.con_id with clk_lookup.de
This patch add support to multiplexed smbus for proliant microserver
N36L and may be applicable to other configuration based on sb8xx
southbus.
root@proliant:/usr/src/lm-sensors/eddi# i2cdetect -l
i2c-0 smbus SMBus piix4 adapter (SDA0) SMBus adapter
i2c-1 smbus
