Re: [PATCH v1 13/13] i2c: designware: Convert to use unified device property API

[Jarkko Nikula]

On 11/24/2015 12:22 PM, Andy Shevchenko wrote:

From: Mika Westerberg 

With ACPI _DSD (introduced in ACPI v5.1) it is now possible to pass device
configuration information from ACPI in addition to DT. In order to support
this, convert the driver to use the unified device property accessors
instead of DT specific.

Change to ordering a bit so that we first try platform data and if that's
not available look from device properties. ACPI *CNT methods are then used
as last resort to override everything else.

Signed-off-by: Mika Westerberg 
Signed-off-by: Andy Shevchenko 
---
  drivers/i2c/busses/i2c-designware-platdrv.c | 48 +
  1 file changed, 22 insertions(+), 26 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c 
b/drivers/i2c/busses/i2c-designware-platdrv.c
index 809579e..e9062be 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -36,6 +36,7 @@
  #include 
  #include 
  #include 
+#include 
  #include 
  #include 
  #include 
@@ -156,33 +157,28 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
/* fast mode by default because of legacy reasons */
clk_freq = 40;

-   if (has_acpi_companion(>dev)) {
-   dw_i2c_acpi_configure(pdev);
-   } else if (pdev->dev.of_node) {
-   of_property_read_u32(pdev->dev.of_node,
-   "i2c-sda-hold-time-ns", );
-
-   of_property_read_u32(pdev->dev.of_node,
-"i2c-sda-falling-time-ns",
->sda_falling_time);
-   of_property_read_u32(pdev->dev.of_node,
-"i2c-scl-falling-time-ns",
->scl_falling_time);
-
-   of_property_read_u32(pdev->dev.of_node, "clock-frequency",
-_freq);
-
-   /* Only standard mode at 100kHz and fast mode at 400kHz
-* are supported.
-*/
-   if (clk_freq != 10 && clk_freq != 40) {
-   dev_err(>dev, "Only 100kHz and 400kHz supported");
-   return -EINVAL;
-   }
+   if ((pdata = dev_get_platdata(>dev))) {
+   clk_freq = pdata->i2c_scl_freq;
} else {
-   pdata = dev_get_platdata(>dev);
-   if (pdata)
-   clk_freq = pdata->i2c_scl_freq;
+   device_property_read_u32(>dev, "i2c-sda-hold-time-ns",
+);
+   device_property_read_u32(>dev, "i2c-sda-falling-time-ns",
+>sda_falling_time);
+   device_property_read_u32(>dev, "i2c-scl-falling-time-ns",
+>scl_falling_time);
+   device_property_read_u32(>dev, "clock-frequency",
+_freq);


Mika, Andy: Was this one able to go separately? At least it builds 
without rest of the set but is there anything that could break DT based 
system if there are no patches 1-8/13?


Acked-by: Jarkko Nikula 
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v1 13/13] i2c: designware: Convert to use unified device property API

[Mika Westerberg]

On Tue, Nov 24, 2015 at 12:53:06PM +0200, Jarkko Nikula wrote:
> Mika, Andy: Was this one able to go separately? At least it builds without
> rest of the set but is there anything that could break DT based system if
> there are no patches 1-8/13?

As far as I can tell this should not break existing DT systems but I
have not been able to test myself since I don't have any DT systems
here.

> Acked-by: Jarkko Nikula 

Thanks!
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html