Hello!
The issue mentioned on [0] happened on my system a few weeks ago. But
now it seems that Debian Testing (Lenny) and Unstable (Sid) corrected
this problem with sysvinit (2.86.ds1-47)[1].
Perhaps you can add the distro to your list of fixed distros with
updated shutdown.
Regards
Stephan
On Saturday 12 January 2008, Bartlomiej Zolnierkiewicz wrote:
[...]
I've re-read the whole thread and it seems that the possible solution for
Addonics card would be to detect it by PCI Subsystem Vendor/Device IDs.
It seems I wasn't paying enough attention, Tejun already thought of this
but
Hi
Bartlomiej Zolnierkiewicz schrieb:
As a workaround you can try using IDE subsystem siimage driver and pass
idex=ata66 option or modify Tejun's patch to also override device side
cable detection by replacing ATA_CBL_PATA80 with ATA_CBL_PATA40_SHORT.
I'll try this.
Could you send the output
Alexander wrote:
Robert Hancock wrote:
There's this patch which was intended to fix it:
http://lkml.org/lkml/2007/11/22/148
I applied this patch to 2.6.24-rc7. Now at boot time my DVD-RW is
normaly detected as:
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
But I
My SII 3132 port multiplier works with the JMB363 controller on my motherboard
using kernel-2.6.24-rc3 but not with the JMB361 esata controller which i have
on a second motherboard.
I get messages:
ata5.15: failed to read PMP GSCR[1] (Emask=0x4)
ahci :00:12.0: controller can't do PMP,
On Friday 11 January 2008, Borislav Petkov wrote:
This change is temporary and after unification of the IDE subsystem proper
bit setting and testing macros will be introduced.
Signed-off-by: Borislav Petkov [EMAIL PROTECTED]
---
drivers/ide/ide-floppy.c | 82
On Friday 11 January 2008, Borislav Petkov wrote:
In addition to shortening the function name, move the printk-call into the
function thereby saving some code lines. Also, make the function out_of_line
since it is not on a performance critical path.
Signed-off-by: Borislav Petkov [EMAIL
On Friday 11 January 2008, Borislav Petkov wrote:
i.e.,
ERROR: switch and case should be at the same indent
ERROR: need spaces around that '=' (ctx:VxV)
ERROR: trailing statements should be on next line
WARNING: no space between function name and open parenthesis '('
WARNING: printk() should
On Friday 11 January 2008, Borislav Petkov wrote:
Signed-off-by: Borislav Petkov [EMAIL PROTECTED]
---
drivers/ide/ide-floppy.c |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 89b26ea..0729df5 100644
---
On Sat, 2008-01-12 at 13:25 -0600, Robert Hancock wrote:
Alexander wrote:
Robert Hancock wrote:
There's this patch which was intended to fix it:
http://lkml.org/lkml/2007/11/22/148
I applied this patch to 2.6.24-rc7. Now at boot time my DVD-RW is
normaly detected as:
sr0:
[...]
This is not an equivalent transformation:
header-wp is 0 or 1
pc.buffer[3] 0x80 is 0 or 0x80
It seems to work fine for -wp (because it is needlessly defined as 'int')
but may seriously confuse set_disk_ro() and thus bdev_read_only() users.
Should be fixed to '(pc.buffer[3]
On Sat, Jan 12, 2008 at 09:14:39PM +0100, Bartlomiej Zolnierkiewicz wrote:
[...]
PS1 Please rebase the patches still needing polishing on top of updated
IDE quilt tree, recast them and respin the patch series (no need to post
already merged patches).
sure, will do.
PS2 what happend to fix
On Sat, 2008-01-12 at 19:38 -0600, Robert Hancock wrote:
James Bottomley wrote:
On Sat, 2008-01-12 at 17:04 -0600, Robert Hancock wrote:
I don't think the problem is that there's some buffer which is getting
allocated above 4GB and never bounced, since the problem goes away if
ADMA is
Fix stupid typo.
Signed-off-by: Tejun Heo [EMAIL PROTECTED]
---
drivers/ata/sata_sil24.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index b4c674d..d9c8b32 100644
--- a/drivers/ata/sata_sil24.c
+++
CERR reports errors detected during executing a command. This doesn't
mean the error is tied to the command and can be recovered by just
issuing it again. Many of the errors are fatal port-wide connditions
including HSM violation, host bus error and ATA bus error and require
freezing and port
Marc Howard Zuckman wrote:
On Sat, 12 Jan 2008, Bartlomiej Zolnierkiewicz wrote:
In smart mode controller takes care of mode programming.
Cc'ing Alan and Bartlomiej. Guys, is this the smart mode problem? Do
ide and libata have this fixed in 2.6.24-rc?
[ added Alan and myself ;) to cc:
Tobias Müller wrote:
Hi
Please apply the attached patch and specify libata.force_cbl=80 as
kernel boot parameter. If you load libata from initrd or after boot you
need to pass 'force_cbl=80' as module parameter. How you do it depends
on your distro.
Ah.. right. I'm brewing more complete
On Sun, 13 Jan 2008, Tejun Heo wrote:
Does this change anything? And, yeah, I really wanna see the hdparm
--Istdout too.
I applied the patch to libata-core.c.
A scsi device, /dev/sdb, was recognized, but partition /dev/sdb1 (where
all the data resides) is not seen. Boot log messages and
18 matches
Mail list logo
