Thanks, I had seen that earlier and was really hoping it wasn't just a
bad card :-) It and the drive are brand-new. As an aside, it looks
like the drive may get confused shortly after the initial probe.
Unloading and reloading the driver causes this:
libata version 1.11 loaded.
sata_sil versio
Larry Battraw wrote:
> Hi Tejun,
>
> Thanks for the reply. I've tried different PCI slots, different
> ports, different cables, and lastly, win98 DOS. DOS is able to
> partition and format the drive without a problem, and I copied files
> over, etc. without any errors. Are there any dia
Hi Tejun,
Thanks for the reply. I've tried different PCI slots, different
ports, different cables, and lastly, win98 DOS. DOS is able to
partition and format the drive without a problem, and I copied files
over, etc. without any errors. Are there any diagnostics or tests I can
run to
Hello, Larry.
Larry Battraw wrote:
I installed a SiL3114-based PCI card (Syba) and Western Digital
WD2500SD in my system recently and haven't been able to get the system
to write/read any data from the drive beyond the initial drive probe. I
get a lot of messages about "ATA: abnormal status
I installed a SiL3114-based PCI card (Syba) and Western Digital
WD2500SD in my system recently and haven't been able to get the system
to write/read any data from the drive beyond the initial drive probe. I
get a lot of messages about "ATA: abnormal status 0xD8 on port
0xF081C0C7" and SCSI parit
