Hello,
I've got a couple of older PMP's with Sil3726.
I wonder if it's possible from Linux to check which firmware version it is on
the Sil3726 and on the Sil3124?
Is it possible to upgrade the firmware/bios on Sil3726 and Sil3124 from Linux?
Best Regards,
/LM
-
To unsubscribe from this
Hi,
I don't know really which subsystem this, so I'm sending this to the
linux-ide list.
Please direct me to a more appropriate place if this is not correct.
I'm using a 3ware 9500 with Linux 2.6.18.1. I've grown the HW
raid5-array and here is where the problem begins. After the card had
exp
Hi Tejun et. al.
I'm running a server with Linux 2.6.18.1+Debian's Xen-patches and the
sata+pmp-patches from
http://home-tj.org/files/libata-tj-stable/libata-tj-2.6.18.1-20061020.tar.bz2
Unfortunately I can't upgrade to anything newer than 2.6.18 since there
is no Xen Dom0-patches that I'm awa
Hi,
I have a system with a Sil3124 controller and two Sil3726 port multipliers.
I'm running 2.6.18.1 with the patches from
http://home-tj.org/wiki/index.php/Libata-tj-stable
since I was not able to get the port multipler to work at all with
2.6.21 (perhaps the support for PMP is not fully integ
Tejun Heo wrote:
Lars Michael Jogbäck wrote:
I have a system with a Sil3124 controller and two Sil3726 port multipliers.
I'm running 2.6.18.1 with the patches from
http://home-tj.org/wiki/index.php/Libata-tj-stable
since I was not able to get the port multipler to work at all with
2
Tejun Heo wrote:
Lars Michael Jogbäck wrote:
I think the disk attached to port 0 might be bad. Please report the
result of 'smartctl -d ata -a /dev/sdX' where sdX is the device attached
to the failing port.
SMART Error Log Version: 1
No Errors Logged
I was hop
