I think you're on the wrong mailing list ;)
XDA may be able to help you
In general the phones try to protect their memory from direct access so
that the whole 2 OS accessing the same FS at the same time and stepping on
each other is avoided (back in the symbian days it used to unmount the
memor
Raspberry Pi uses USB2.0, it can't provide enough current to big peripheral
devices full stop.
It's so bad that plugging in a disk-on-key while it's running can cause a
sufficient voltage drop to reboot the system (after which the d-o-k will
work).
That's why you need to have a powered USB hub, USB
Get a powered USB hub (i.e. a usb hub which also connects to a wall power
socket). I'm not familiar with RPi USB version but check for USB 3.0 vs.
2.0.
On 15 December 2014 at 06:07, Gabor Szabo wrote:
>
> Hmm, good question. The Raspberry does see the device when it is
> connected, so is it possi
Hmm, good question. The Raspberry does see the device when it is connected,
so is it possible that it needs more
power after later on?
How can I check?
If the problem is lack of current, how can I solve that? Can I put one of
these usb hubs that also provide power between the two?
Gabor
On Sun,
Are you providing the external HDD with sufficient electricity? The
Raspberry is most likely not capable of providing enough current...
2014-12-14 19:30 GMT+02:00 Gabor Szabo :
>
> So finally I install the Raspberry Pi I bought a few weeks ago and wanted
> to add an external HDD.
> I plugged in th
Aside from regularly installing updates I've made no changes - but the
problem went away for no apparent reason. I guess I'll never know what
was causing the delay.
On Sun, 7 Dec 2014 09:29:56 +0200
shimi wrote:
> On Sat, Dec 6, 2014 at 6:39 PM, Shlomo Solomon
> wrote:
>
> > I tried running ps
So finally I install the Raspberry Pi I bought a few weeks ago and wanted
to add an external HDD.
I plugged in the external hard drive and /var/log/syslog printed the
following:
Dec 14 17:02:55 pi kernel: [ 759.981949] usb 1-1.3: new high-speed USB
device number 8 using dwc_otg
Dec 14 17:02:55
