Hi
I've upgraded apache from 1.3.12 to 1.3.27 and since then cron.daily sends
root emails (on a daily basis) with this message: error: apache:1 {
expected after log file name.
It's a redhat 6.2 and logrotate 3.3.2.
this is the logrotate.conf file:
# rotate log files weekly
weekly
# keep 4 weeks
see what's the problem...
- Original Message -
From: Shaul Karl [EMAIL PROTECTED]
To: Ishai Parasol [EMAIL PROTECTED]
Cc: Linux Mailing-List [EMAIL PROTECTED]
Sent: Friday, February 14, 2003 6:56 PM
Subject: Re: cron.daily error message regarding apache
On Fri, Feb 14, 2003 at 06:13
Hi
Does any of you have experience with Cnet CNAD 804-NF Adsl router ?
Anything good or bad to say about it ?
Thanks,
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g.,
- Original Message -
From: Hetz Ben Hamo [EMAIL PROTECTED]
I would suggest a cheap-o small PC (processor doesn't really matter - be
it
VIA, AMD K6/K7, Pentium I/II/III/Celeron) with 2 NICS should do the job
perfectly..
And the modem ? anything good that can be bought around here ?
Hi,
I use a combination of SpamAssassin and Razor. Very good.
SpamAssassin: http://spamassassin.org
Razor:http://www.vipul.net and
http://razor.sourceforge.net
I might post a short intro on how to set this up if there is enough
demand.
Amit
Please
- Original Message -
I don't know about driver for Linux for the ADSL modem, simply because my
boss
didn't give me any sample to test and play with, but again - GO buy an
Alcatel, even at eBay, which you can find for $20-$50 a piece.
Any idea where can I buy one of those (or the pro
Hi
If I'm updating apache httpd server (on RH6.2) from 1.3.12 to 1.3.27, do I
need to change anything in the httpd.conf file ? Do I actually need to do
anything besides rpm -U apache-1.3.27.rpm ?
Thanks,
Ishai.
=
To unsubscribe,
Hi
I'm looking for a way to know (using the command line) the number of emails
that a /var/spool/mail/USERNAME file contains. Right now I'm using less
/var/spool/mail/USERNAME | grep -c Subject: , but it's not accurate enough
(cases of forwarded mails etc.). Any better ideas ?
Another question.
Hi
Is there anyone in the Ra'anana / Kfar-saba area (or that hangs around
tel-aviv university) that will trade the 3 first discs of redhat 8.0 for the
media's cost (or 3 empty) ? If there is, please send me privatly your phone
no.
Thanks,
Ishai.
Hi there
Am I the only one who get the messages 20 times each ?
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL
Hi there
Am I the only one who get the messages 20 times each ?
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL
Hi
Im Kvar Be-postfix queue Askinan...
I use it as my smtp server and when I send an email it stays in the queue
for one or two seconds, but sometimes it can stay there for 10-20 minutes.
Why does it happen, what cause the long delay ?
Thanks,
Ishai.
Hi
Does anyone know about a free backup mail server service somewhere over the
net ?
Thanks,
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
Hi
I'm planing a litlle home network with a gateway firewall on the first
box, and then 3 old boxes (pentium 100 or so with 500mb hd) that suppose to
serve http, mail, ftp, etc for the outside world. each box should have no
more than apache+ftp+ssh or postfix+ftp+ssh without any X or other
Hi
I got localhost -- MARK -- in my log (/var/log/messages) every 20 minutes
for a few hours.
Any ideas what is it ?
Thanks,
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body,
Hi
Does any one know where can I download nukof (hebrew php-nuke) from ?
I tried http://nukof.dotkof.org but it's not available.
Thanks,
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the
Hi
What can I do if I want to run a script on a regular basis using cron, but I
need it between the system's crons (lets say every 3 hours) ?
Thanks,
Ishai.
P.S. - Runinng redhat 6.2
=
To unsubscribe, send mail to [EMAIL
Hi
Can someone point me to a new ups howto (the only one i can find is from
1997).
Thanks,
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
Hi
Can someone point me to a new ups howto (the only one i can find is from
1997).
As far as I know you will not find anything newer in the LDP.
It does explains the essentials of UPS handling quite well.
Perhaps you would like to share what are you aiming at?
I'm planing to buy
Hi
Does any one know about a small linux distribution that can be run as an
application on win9x (I don't mean those dists that sits on one of the win
partitions and requiers reboot to start them) ?
thanks,
Ishai.
=
To
- Original Message -
From: Tzafrir Cohen [EMAIL PROTECTED]
PhatLinux is one of those linux distros that sits on one of the win
partitions and requiers reboot to start it.
And AFAIK it is not downloadable (give us 25$ and we'll send you a cd)...
Hi,
I used openssl Ca.pl tool to sign my own certificate and then I added it to
the original req file (as described in the qpopper manual) but when I try to
login with Outlook Express with ssl I get from the server log:
(null) at 192.168.x.x (192.168.x.x): -ERR POP EOF or I/O Error.
All the
Hi
I have installed QPopper4.0.3 with tls/ssl enabled and I'm trying to make
the tls/ssl keys,
following the instructions in the user manual. My problem is that I don't
understand what to do next after creating the cert.pem file. what I did was:
openssl req -new -nodes -out -req.pem - keyout
Hi
I'm connected to the net with an isdn modem 24/7 and I'm looking for a
script that will check every X minutes if I'm on line and in case that i'm
not it will run the dial script. I tried to do it with isdnctrl auto mode
dial but it's not working, I think it's got something to do with the fact
Hi
I downloaded the RedHat rpm file of the jdk1.3 from sun's website and the
file's name ends with .bin . I tried to change it to rpm but it seems not
to be an rpm file (although the link in the site is to a redhat rpm file).
Does some one know what's a bin file and how can I upgrade my jdk1.2.
Hi
I'm trying to log anonimously with a bezeqint account and still get the same
problem...
Ishai.
- Original Message -
From: Shaul Karl [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 17, 2001 3:38 AM
Subject: 1. ftp.tau.ac.il 2. www.exploits.org
1. ftp.tau.ac.il:
Hi
I have the same problem, and I have checked it also with nonstop account -
and it gave me the same result.
Ishai.
P.s. - I can get into ftp.cs.huji.ac.il with bezeqint account for a long
long time, so it's probably not a general problem of bezeqint.
- Original Message -
From: Shaul
Hi
I have the same problem, and I have checked it also with nonstop account -
and it gave me the same result.
^^^ Regarding ftp.tau.ac.il ^^^
Ishai.
P.s. - I can get into ftp.cs.huji.ac.il with bezeqint account for a long
long time, so it's probably not a general problem of bezeqint.
Hi
2 questions:
1) Does someone here maybe know if the postfix server has a default number
or time for "retries" in a case of a bounced mail because of a down server
in the target side ?
2) OT: does anyone know of a good reliable and cheap dynamic dns provider
that let you use your own domain
Hi
Can anyone tell how many people are subscribed to the list ?
Thanks,
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail
- Original Message -
From: "Hetz Ben Hamo" [EMAIL PROTECTED]
To: "Oded Arbel" [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, March 28, 2001 6:14 PM
Subject: Re: KDE 2.2.1
I'm just curious to know - do people want the RPM's for Redhat 6.x also?
Hetz
Yes Please.
Thanks,
Hi
A theoretical question: I have a little network with one box as a gateway
and another one connected to him directly (two network cards). The gateway
runs an apache+postifx server. Now, let's say that the gateway's IP is
192.168.1.1 and its "external" IP from my isp is 192.xxx.xxx.xxx and the
Hi.
A question:
Basicaly If I have a CNAME record *.mydomain.com and it's good for www
mail (the servers are being "called" with inet by the port) and I don't want
to have a backup mail server, then I don't have any special reason to setup
an MX record. Right ?
Ishai.
- Original Message
Hi
I guess you should try www.isoc.org.il, if I understand right they're in
charge of all the *.il registrations.
Ishai
- Original Message -
From: "Geoffrey S. Mendelson" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, March 15, 2001 1:46 PM
Subject: Where do I change my top
Hi
I upgraded kde to 2.1, especially for kdevelop. It looks o.k. but when I try
to compile a litlle "hello world" program to see how it works I get those
grey, can't be used, lines in the compilation menu. I ask you guys: "haven't
the jewish people sufferd enough ?"
Ishai.
P.S. - It seems like
Thanks,
you're right - it's the PAM thing. I upgraded it and now it works.
Ishai.
- Original Message -
From: "Herouth Maoz" [EMAIL PROTECTED]
To: "Ishai Parasol" [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, February 28, 2001 10:12 AM
Subject: Re: Kde
Hi Oded
If I understood your problem, I had the same one
with 2.0 and I used xdm to login (xdm login screen looks like it was taken from
a mid 80's science fiction computers film - really cool :-) ). Any way, I just
eneterd xdm (as root) and it started X, asked for user+pass and got me
Hi Oded
I'm loading the modules during the booting process and dial (maually) after
it finishes the reboot. That's make two parts: one (modules) in a situation
that looks like runlevel 1 (before all the processes starts) and two
(dialing) after all the processes run already (after reboot) which
Hi
I upgraded kde to 2.1 but now I can login only with root, all the rest gives
me "login failed" (with nice colors and everything... but...). Anyone has
any idea what is it ?
Ishai.
=
To unsubscribe, send mail to [EMAIL
Hi
I'm trying to install kdevelop 1.4 over Kde2.0.1 with qt-2.2.3. I tried to
compile the source and had ofcourse compiler internal errors and
installation errors, so I tried the rpm but i get unsatisfied dependencies
for these files:
libXft.so.1, libXrender.so.1, libkdefakes.so.0,
Hi
Does Kdevelope works on kde2.x.x (with qt2.x.x) ?
Ishai
- Original Message -
From: Oded Arbel [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Linux-IL mailing list [EMAIL PROTECTED]
Sent: Thursday, February 22, 2001 11:16 AM
Subject: Re: A tool for Perl And C++
There are two really
Hi
I run on my RH6.2 postfix+cucipop servers and yesterday, after an
"electricity break" I rebooted and restarted all the servers and everything
is working smoothly, exactly like it was before, but when I try to start
cucipop I get "unable to bind socket 110" [failed] which is very strange
Sure.
- Original Message -
From: "Alon Altman" [EMAIL PROTECTED]
To: "Ishai Parasol" [EMAIL PROTECTED]
Cc: "Linux - IL Maling List" [EMAIL PROTECTED]
Sent: Wednesday, February 21, 2001 11:50 AM
Subject: Re: cucipop: unable to bind socket 110
On Wed, 21
netstat gives:
tcp 0 0.0.0.0.0:110 0.0.0.0:*LISTEN
- Original Message -
From: "Tzafrir Cohen" [EMAIL PROTECTED]
To: "Ishai Parasol" [EMAIL PROTECTED]
Sent: Wednesday, February 21, 2001 11:52 AM
Subject: Re: cucipop: unable to bind socket 110
- Original Message -
From: "Tzafrir Cohen" [EMAIL PROTECTED]
To: "Ishai Parasol" [EMAIL PROTECTED]
Sent: Wednesday, February 21, 2001 12:29 PM
Subject: Re: cucipop: unable to bind socket 110
Is it supposed to listen on port 110, or be called by inetd ?
fuser -v -n
Hi Hetz
I need them for 6.2. Probably others need it too.
Thanks,
Ishai.
- Original Message -
From: Hetz Ben Hamo [EMAIL PROTECTED]
To: linux-il [EMAIL PROTECTED]
Sent: Monday, February 19, 2001 5:56 PM
Subject: Redhat 6.2 RPM's for KDE 2.1?
Hi All,
I don't know if bero from
TEST
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
test
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
Hi
Has someone here managed succesfully to install drac (pop-before-smtp) and
postfix together and to make it (the drac mechanism) to work ?
Ishai.
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the
Hi
Does anybody know where can i find examples of SSHd configuration files, I
mean /etc/sshd_config /etc/hosts.allow etc.
TIA,
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message
Hi
I had Rh6.2 machine connected with win95 machine with samba 2.0.6 and
everything worked fine. I upgraded it to win98 and since then when ever I
try to get into my home directory from the win machine I get the wrong
password message. I tried to add "encrypt passwords = yes" to the smb.conf
Hi
Is there a way to print the contents of the xterm (and its similair
terminas), including the command lines, the prompts, the commands / file
names and ofcourse the output ?
TIA,
Ishai.
=
To unsubscribe, send mail to [EMAIL
TEST
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
Thanks for the replies, I tried it and it is Ctrl+D.
Ishai.
On Tue, 31 Oct 2000, Shaul Karl wrote:
Isn't Ctrl+D the equivalent UNIX function for DOS's Ctrl+Z?
(Unless you explicitly changed it. Is this done by stty?)
Ishai Parasol wrote:
It's a bit off topic so answer me
Hi
Is there any body out there, in the ra'anana - kfar saba area that can
take 2 blank cd's from me and in exchange give me the two new cd's of
mandrake 7.2 ?
Thanks
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
Hi
It's a bit off topic so answer me privatly please.
I know that in other c++ compilers (other than gcc) the keyboard input for
cin.eof() is Ctrl+Z. But when i compile a program with g++ and run it,
Ctrl+Z only stops the program. Do you know how I actually activate this
function ?
Thanks
Hi
I guess they charge for each line number. I use the same line number for
both lines and charged for only 99nis (although I use them both for 128K).
Ishai.
On Mon, 30 Oct 2000, Omer Zak wrote:
When Bezeq advertised its "Chofshi Chodshi" program for unlimited Internet
access for
Hi
I'm trying to install qt-2.2.1-1.6x.src.rpm with rpm --rebuild filename
but I get a "compiler internal error" message in the end of the process.
I'm using rh6.2 with gcc-2.95.x. What can I do ?
TIA,
Ishai.
=
To unsubscribe,
-blah-blah.spec
This will create 3 RPM's in the directory /usr/src/redhat/RPMS/i386/ -
install all 3 of them.
If you still have problems - then look at the spec file to see what it
needs..
Hetz
Ishai Parasol wrote:
Hi
I'm trying to install qt-2.2.1-1.6x.src.rpm with rpm --rebuild
Hi
I have kde 1.92 installed on my rh6.2 system. I would like to upgrade it
to kde 2.0 but i'm not sure how. I have downloaded the 6 SRPMS from the
rh6.2 directory in the kde mirror, and I guess I should rpm -U them, but
what about all the other rpm's from 1.92 (most of them applications) ?
Hi
Is there a way to print hebrew characters with the printer ? How ?
I tried to print in hebrew with netscape and with my "hebgtk'ed" editor
but with no success. I use RH6.2 with HP Deskjet 840c, configured with
aspfilter-4.9.9 as cdj670 (the closest driver i could find).
TIA,
Ishai.
Hi
Does some one maybe know when RH7.0 should be released ?
Ishai.
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
Hi Shaul
The options of ipppd can be set in the ioptions file (the "+mp" is for
channels bundling). I use pap-secrets file with bezeqint and its format
is:
usaername * password
that's all.
the isdnctrl list all ioptions file are attached.
I can send you a script if you need.
Good Luck
On Wed, 16 Aug 2000, Shapira Home Mail wrote:
can some1 modify this for 64k.
thx
MS
Hi
Just give up the ippp1 configuration
#!/bin/bash
/usr/sbin/isdnctrl addif ippp0
/usr/sbin/isdnctrl secure ippp0 on
/usr/sbin/isdnctrl addphone ippp0 out 136014
/usr/sbin/isdnctrl l2_prot ippp0 hdlc
Hi
I'm trying to get connected to my isp (bezeqint) with 128k isdn but all i
can get is 64k. I have both chanlles connected, I get in /sbin/route
output the same ip for ippp0 ippp1, I'm losing my phone line (which
means the two lines are busy) but still get kbps of only 64k.
Should I
,
This is getting annoying I think people should start looking in the
list archive before coming here or something.
Anyways, use the attached script.
On Sat, 12 Aug 2000, Ishai Parasol wrote:
Hi
I'm trying to get connected to my isp (bezeqint) with 128k isdn but all i
can get is 64k. I have
Hi
can som one please explain how to install the i18n-he tar.bz2 file ?
Thanks
Ishai
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe |
On Sat, 29 Jul 2000, Pavel Bibergal wrote:
Use true type fonts
u can take them from hebrew windows
HOW ??? I mean, It's not working like it does with the regular font
(mkfontdir + xset...). I just don't see it in the netscape fonts
preferences.
TIA
Ishai.
Hi
I need a script for making a ppp conection over an isdn adapter.
Please don't reffer me to KISDN or RH6.2 Isdn-Config because I know them
and what i need is the script itself (the only way to really learn
How-To...). btw, if someone knows how to add another channel (add slave
ippp1 or
Hi
Can someone recommend a good scanner (and software) that works with
RH6.2 ?
TIA
Ishai
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe |
Hi
I have upgraded my RH from 6.1 to 6.2 a few days ago. All the newer
RPMs stayed as they are (netscape 4.73 etc.). You should have no problem
with it.
Ishai
On 19 Jun 2000, Aharon Schkolnik wrote:
Hi.
I'm just about to do my first RedHat upgrade - from 6.1 to 6.2. I've
done a number
Hi
I have the same card that you have and bttv-0.6.4h installed. I'm trying
to watch it with xawtv but I get no picture and no sound. Can you please
send me your xawtv config file ($HOME/.xawtv) or recommend me on another
software.
TIA
Ishai
On Mon, 12 Jun 2000, Hetz Ben Hamo wrote:
Well, I
Like yours (HETZ)
On Mon, 12 Jun 2000, Hetz Ben Hamo wrote:
Ishai, which card you have - like mine or like Pavel's??
Hetz
Ishai Parasol wrote:
Hi
I have the same card that you have and bttv-0.6.4h installed. I'm trying
to watch it with xawtv but I get no picture and no sound
me how to do it ?
TIA
Ishai Parasol
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
test
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
Hi
I'm using RH6.1 and I would like to upgrade it to 6.2. Does some one here
maybe know about any on line tutorial or a descent HowTo (except the mini
howto from 1996) ?
Thanks,
Ishai.
=
To unsubscribe, send mail to [EMAIL
Hi
A new Linux portal at cnet.com.
The address is: linux.cnet.com
Ishai.
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe
HI
Does anyone here know about a software that can send faxes over an isdn
modem (like RVS-com for win) ?
TIA
Ishai Parasol
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubs
myself for this
info but most of it is very old and the usenet groups are mostly in a deep
comma.
Thanks,
Ishai Parasol
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the me
TEST
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
I work for a few monthes now with an isa Tas100 which is a clone of asus
com. Works just fine for me with Kisdn software (over KDE ofcourse).
Ishai Parasol,
[EMAIL PROTECTED]
Linux - It's safe now to turn ON your computer...
On Sun, 6 Jun 1999, Ben Nes Michael wrote:
Any one have experience
Hello
I'm using Kisdn Over Kde1.1 and RH5.2 (2.2.5) and my ISP is IsdnNet. Why
my mail mail transporting is much slower than in windows ? It happens
with a a few programs (netscape, pine(with getmail), etc.). Does it
happen to other IsdnNet customers too ?
--
Ishai Parasol,
[EMAIL PROTECTED
Hello
I would like to know how can i change my reply name in pine 4.10. When i
send emails from pine they are arriving with the reply address
"[EMAIL PROTECTED]" and ofcourse i need it to be my internet mail
username ("[EMAIL PROTECTED]").
--
Ishai Parasol,
[EMAIL PROTECTED
.3.1 then you
should upgrade your kernel. RH5.2 uses 2.0.36, I had the same problem
and upgarding to 2.2.2 solved mine. I heard that 2.3.0 is out so you
should probably use this one.
Good luck
--
Ishai Parasol,
[EMAIL PROTECTED]
Linux - It's safe now to turn ON your computer...
sc/hisax.o: init_module: Device or resource busy
How can I fix it ?
Thanks,
Ishai Parasol
[EMAIL PROTECTED]
---
Linux - It's safe now to turn ON your computer...
---
the full 2.2.5 file (13MB) and make the all
installation procedure ?
Thanks,
Ishai Parasol
[EMAIL PROTECTED]
---
Linux - It's safe now to turn ON your computer...
---
Hello
Does anyone know when RedHat releases it's new version to linux (5.3 or 6.0)
?
Ishai
[EMAIL PROTECTED]
Linux - It's safe now to turn ON your computer...
87 matches
Mail list logo