On Thu, Jun 21, 2001 at 06:36:03PM -0700, Dionysius Wilson Almeida wrote:
> I tried inserting a udelay(1) and increasing the count ..but
> the same behaviour.
>
> any clues ? btw, i've been able to compile the redhat 7.1 intel e100
> driver and it works fine for my card.
Your problem is
Here is a series of oopses. They occured while realplay was running.
The sound changed from the dulcit tones of Marvin Gaye to short,
static-y bursts. Innocently enough, I thought to bother my sound
driver's maintainer, but the problem isn't in his regime; not knowing
who else to bother, I'm
On Wed, 20 Jun 2001, Rik van Riel wrote:
> > FWIW, here is the vmstat output for the second (short) hang. Taken with
> > ac14, vmstat 1 was started (long) before the hang and interrupted about
> > five seconds after it. The machine has 128MB RAM and 256MB swap.
>
> >procs
On Friday 22 June 2001 05:33, Ho Chak Hung wrote:
> Is it possible to allocate and add pages to the page cache without a
> underlying file system in Linux 2.4? I know that the host pointer to inode
> structure inside the address_space structure can be NULL, but does this
> mean that we can still
>Did I mention I'm writing a book on all this? (The history of linux and
the
>computer industry, going back to World War II...) This makes me the only
>person I know who's excited about finding ~50 issues of "Compute" and
>"Compute's gazette" from the mid 80's at a garage sale. An the
> " " == Alexander Viro <[EMAIL PROTECTED]> writes:
> Trond, could you review the patch below? I believe that it's
> OK
> wrt races around iget(), but I'd appreciate if you take a look
> at it.
It certainly doesn't suffer from the problem I raised last time, so at
I have been following the development of the tulip driver with some
interest because my hardware requires it! I have described the
hardware setup I use before, but I can post it again if necessary.
I will only be able to test new versions/fixes until Tuesday morning
(UK) because then I lose my
On Fri, 22 Jun 2001, Marcelo Tosatti wrote:
> On Fri, 22 Jun 2001, Mike Galbraith wrote:
>
> > One thing that _could_ be done about looping allocations is to steal
> > a page from the clean list ignoring PageReferenced (if you have any).
> > That would be a very expensive 'rob Peter to pay Paul'
On Thu, Jun 21, 2001 at 10:30:40PM -0400, Rick Hohensee wrote:
> Why does Linux have a mktime routine fully coded in linux/time.h that
> conflicts directly with the ANSI C standard library routine of the same
> name? It breaks a couple things against libc5, including gcc 3.0. OK, you
> don't care
On Fri, 22 Jun 2001, Mike Galbraith wrote:
> On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
>
> > On Thu, 21 Jun 2001, Mike Galbraith wrote:
> >
> > > On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
> > >
> > > > > 2 4 2 77084 1524 18396 66904 0 1876 108 2220 2464 66079 198
>1
> >
Hi,
I'm maintaining a device driver that has recently had the ability to
control multiple units added to it. At present, applications can get info
on the driver's and hardware's status through a file in /proc/driver.
What I would like to know is what the prefered way to handle multiple
[EMAIL PROTECTED] said:
> Earlier today I was contacted by a principal at a well-known Linux
> company who was in a mild panic over recent arguments by Alan Cox and
> David Miller. This company (not VA or Red Hat, BTW) fears that their
> customers will run from Linux if they get the idea that
I do not know if this is a new filesystem hierarchy, it should not be,
at less untill lsb finishes all discussion (anyway it is similar to lsb
standard). Your mail is a little confusing for me. Let's see if i can
clarify my ideas.
On Thu, 21 Jun 2001, D. Stimits wrote:
> I found on my newer
On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
> On Thu, 21 Jun 2001, Mike Galbraith wrote:
>
> > On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
> >
> > > > 2 4 2 77084 1524 18396 66904 0 1876 108 2220 2464 66079 198 1
> >
Jon Forsberg <[EMAIL PROTECTED]> ecrit :
[...]
> Prints the same messages as before but continues working afterwards. No need
> for ifdown/ifup in other words. No crash so far.
I'll polish and submit it to the maintainer next week then.
--
Ueimor
-
To unsubscribe from this list: send the line
Hi !
I have a problem with reading from a serial port using select() under
2.4.5. What I am doing is basically the following:
fd_set readfds;
struct timeval timeout;
int s;
serialfd = open("/dev/ttyS0", O_RDWR );
init_serial(B9600);
timeout.tv_sec = 2; /* ! */
timeout.tv_usec = 0;
[EMAIL PROTECTED] said:
> OK, the revised list of the missing is
> CONFIG_MOMENCO_OCELOT CONFIG_MTD_CFI_VIRTUAL_ER
These haven't changed in the last five days either.
--
dwmw2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL
[EMAIL PROTECTED] said:
> I've done that in my rulesfile, thanks. Here is the current list of
> ignored symbols:
> derive CMDLINE_BOOL from n
etc...
That'll nicely break oldconfig behaviour when the options in question do
get merged into the main tree, won't it?
Can you make them
David Woodhouse wrote:
>[EMAIL PROTECTED] said:
>
>> you could try using jffs2 on a RAM-simulated MTD partition. i think
>>that would work but i have not tried it..
>>
>
>It works. Most of the early testing and development was done on it. It
>wouldn't give you dynamic sizing like ramfs though.
Chris Mason <[EMAIL PROTECTED]>
06/21/01 08:20 PM
Please respond to Chris Mason
To: Andrea Arcangeli <[EMAIL PROTECTED]>, Linus Torvalds
<[EMAIL PROTECTED]>
cc: Stefan Bader/Germany/IBM@IBMDE,
[EMAIL PROTECTED]
Subject:Re: correction: fs/buffer.c
Alexander Viro <[EMAIL PROTECTED]> writes:
> On Thu, 21 Jun 2001, Rusty Russell wrote:
>
> > Disagree. A significant percentage of the netfilter bugs have been
> > SMP only (the whole thing is non-reentrant on UP).
>
> I really doubt it.
> Well, if you use GFP_ATOMIC for everything...
Thanks folks, I got some great comments, pointers a
list of problems which I need to take care of.
I promise that when I try and implement user
level interrupts - it won't be a hack, all problems
will be taken care of based on good programming
practices.
I will look into the steps provided by
Thomas Weber wrote:
>
> I'm on 2.4.6pre3 + freeswan/ipsec on my gateway now for 5 days.
> It's an old 486/66 32MB with several isdn links, a dsl uplink (with
> iptables masquerading) behind a ne2k clone and a 3c509 to the inside network.
> no problems at all with the interfaces (all compiled as
FREE REPORT ON HOW TO LOWER YOUR TAXES 50-100% FOR THE REST OF YOUR
LIFE.
<>
Simply respond with your email address, name and phone number to
receive the FREE 13 page REPORT on how to LEGALLY, LAWFULLY,
ETHICALLY, SLASH YOU TAXES TO -0- .
Name:
Email address:
Phone Number:
Best time to
> I need an advice, my machine is i810 chipset and using
> ACPI bios, but not sure which one i should use in the
> kernel config. Now I use APM with kernel kapm-idle .
If you have the option - use APM not ACPI. ACPI is larger, and right now
being experimental code - fairly buggy
-
To
I have got a error in my syslog about a Null pointer in the kernel (OOPS):
/proc/version:
Linux version 2.4.5 (root@coper) (gcc version 2.96 2731 (Red Hat Linux
7.0))
#4 SMP Tue Jun 12 10:05:20 EDT 2001
On Thu, 21 Jun 2001, Tom Vier wrote:
> i having some strange vm behavour with -ac17 that didn't happen with -ac14
> (i haven't tried 15 or 16). it starts swapping even when i have hundreds of
> megs of free ram. [...]
>
> vmstat:
>procs memoryswap io
¡° ¤Þz¡[EMAIL PROTECTED] (Alexandr Andreev)¡n¤§»Ê¨¥¡G
> Hi all! I need to ask some questions about linux-2.4.3 for MIPS.
try oss.sgi.com
or [EMAIL PROTECTED]
--
[1;32m¡° Origin: [33m¤gê¡D¤s¹ë [37m [m
[1;31m¡» From: [36mpoorgod.poorman.org[m
-
To unsubscribe from this list: send the
Hi
What may happen on a SMP machine if a serial port has been closed and the
closing stage is at shutdown() in serial.c in the call to free_IRQ and
BEFORE the IRQ is really shutdown, a new character arrives which causes an
IRQ? Is it possible that the OTHER cpu takes this interrupt and causes a
As you can see, this is just deprecation warning,
i.e. you can use multi-string literals, but
you'd better don't.
You can forget about these warnings and test ac17
with gcc3.
I hope that lk-developers would fix it one day.
---
avi
Fabian Arias wrote:
> I've just applied the "patch", but te
As you can see, this is just deprecation warning,
i.e. you can use multi-string literals, but
you'd better don't.
You can forget about these warnings and test ac17
with gcc3.
I hope that lk-developers would fix it one day.
---
avi
Fabian Arias wrote:
I've just applied the patch, but te
Hi
What may happen on a SMP machine if a serial port has been closed and the
closing stage is at shutdown() in serial.c in the call to free_IRQ and
BEFORE the IRQ is really shutdown, a new character arrives which causes an
IRQ? Is it possible that the OTHER cpu takes this interrupt and causes a
¡° ¤Þz¡[EMAIL PROTECTED] (Alexandr Andreev)¡n¤§»Ê¨¥¡G
Hi all! I need to ask some questions about linux-2.4.3 for MIPS.
try oss.sgi.com
or [EMAIL PROTECTED]
--
[1;32m¡° Origin: [33m¤gê¡D¤s¹ë [37mbbs.poorman.org / poorman.twbbs.org [m
[1;31m¡» From: [36mpoorgod.poorman.org[m
-
To
On Thu, 21 Jun 2001, Tom Vier wrote:
i having some strange vm behavour with -ac17 that didn't happen with -ac14
(i haven't tried 15 or 16). it starts swapping even when i have hundreds of
megs of free ram. [...]
vmstat:
procs memoryswap io system
I have got a error in my syslog about a Null pointer in the kernel (OOPS):
/proc/version:
Linux version 2.4.5 (root@coper) (gcc version 2.96 2731 (Red Hat Linux
7.0))
#4 SMP Tue Jun 12 10:05:20 EDT 2001
FREE REPORT ON HOW TO LOWER YOUR TAXES 50-100% FOR THE REST OF YOUR
LIFE.
address
Simply respond with your email address, name and phone number to
receive the FREE 13 page REPORT on how to LEGALLY, LAWFULLY,
ETHICALLY, SLASH YOU TAXES TO -0- .
Name:
Email address:
Phone Number:
Best time
Thomas Weber wrote:
I'm on 2.4.6pre3 + freeswan/ipsec on my gateway now for 5 days.
It's an old 486/66 32MB with several isdn links, a dsl uplink (with
iptables masquerading) behind a ne2k clone and a 3c509 to the inside network.
no problems at all with the interfaces (all compiled as
Alexander Viro [EMAIL PROTECTED] writes:
On Thu, 21 Jun 2001, Rusty Russell wrote:
Disagree. A significant percentage of the netfilter bugs have been
SMP only (the whole thing is non-reentrant on UP).
I really doubt it. looking through the thing raised brows
Well, if you use
Chris Mason [EMAIL PROTECTED]
06/21/01 08:20 PM
Please respond to Chris Mason
To: Andrea Arcangeli [EMAIL PROTECTED], Linus Torvalds
[EMAIL PROTECTED]
cc: Stefan Bader/Germany/IBM@IBMDE,
[EMAIL PROTECTED]
Subject:Re: correction: fs/buffer.c
David Woodhouse wrote:
[EMAIL PROTECTED] said:
you could try using jffs2 on a RAM-simulated MTD partition. i think
that would work but i have not tried it..
It works. Most of the early testing and development was done on it. It
wouldn't give you dynamic sizing like ramfs though.
It would
Hi !
I have a problem with reading from a serial port using select() under
2.4.5. What I am doing is basically the following:
fd_set readfds;
struct timeval timeout;
int s;
serialfd = open(/dev/ttyS0, O_RDWR );
init_serial(B9600);
timeout.tv_sec = 2; /* ! */
timeout.tv_usec = 0;
Jon Forsberg [EMAIL PROTECTED] ecrit :
[...]
Prints the same messages as before but continues working afterwards. No need
for ifdown/ifup in other words. No crash so far.
I'll polish and submit it to the maintainer next week then.
--
Ueimor
-
To unsubscribe from this list: send the line
On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
On Thu, 21 Jun 2001, Mike Galbraith wrote:
On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
2 4 2 77084 1524 18396 66904 0 1876 108 2220 2464 66079 198 1
^
I do not know if this is a new filesystem hierarchy, it should not be,
at less untill lsb finishes all discussion (anyway it is similar to lsb
standard). Your mail is a little confusing for me. Let's see if i can
clarify my ideas.
On Thu, 21 Jun 2001, D. Stimits wrote:
I found on my newer
[EMAIL PROTECTED] said:
Earlier today I was contacted by a principal at a well-known Linux
company who was in a mild panic over recent arguments by Alan Cox and
David Miller. This company (not VA or Red Hat, BTW) fears that their
customers will run from Linux if they get the idea that
Hi,
I'm maintaining a device driver that has recently had the ability to
control multiple units added to it. At present, applications can get info
on the driver's and hardware's status through a file in /proc/driver.
What I would like to know is what the prefered way to handle multiple
On Fri, 22 Jun 2001, Mike Galbraith wrote:
On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
On Thu, 21 Jun 2001, Mike Galbraith wrote:
On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
2 4 2 77084 1524 18396 66904 0 1876 108 2220 2464 66079 198
1
On Thu, Jun 21, 2001 at 10:30:40PM -0400, Rick Hohensee wrote:
Why does Linux have a mktime routine fully coded in linux/time.h that
conflicts directly with the ANSI C standard library routine of the same
name? It breaks a couple things against libc5, including gcc 3.0. OK, you
don't care
On Fri, 22 Jun 2001, Marcelo Tosatti wrote:
On Fri, 22 Jun 2001, Mike Galbraith wrote:
One thing that _could_ be done about looping allocations is to steal
a page from the clean list ignoring PageReferenced (if you have any).
That would be a very expensive 'rob Peter to pay Paul' trade
I have been following the development of the tulip driver with some
interest because my hardware requires it! I have described the
hardware setup I use before, but I can post it again if necessary.
I will only be able to test new versions/fixes until Tuesday morning
(UK) because then I lose my
== Alexander Viro [EMAIL PROTECTED] writes:
Trond, could you review the patch below? I believe that it's
OK
wrt races around iget(), but I'd appreciate if you take a look
at it.
It certainly doesn't suffer from the problem I raised last time, so at
first glance, I'd
Did I mention I'm writing a book on all this? (The history of linux and
the
computer industry, going back to World War II...) This makes me the only
person I know who's excited about finding ~50 issues of Compute and
Compute's gazette from the mid 80's at a garage sale. An the university
On Friday 22 June 2001 05:33, Ho Chak Hung wrote:
Is it possible to allocate and add pages to the page cache without a
underlying file system in Linux 2.4? I know that the host pointer to inode
structure inside the address_space structure can be NULL, but does this
mean that we can still make
On Wed, 20 Jun 2001, Rik van Riel wrote:
FWIW, here is the vmstat output for the second (short) hang. Taken with
ac14, vmstat 1 was started (long) before the hang and interrupted about
five seconds after it. The machine has 128MB RAM and 256MB swap.
procs memory
Here is a series of oopses. They occured while realplay was running.
The sound changed from the dulcit tones of Marvin Gaye to short,
static-y bursts. Innocently enough, I thought to bother my sound
driver's maintainer, but the problem isn't in his regime; not knowing
who else to bother, I'm
On Thu, Jun 21, 2001 at 06:36:03PM -0700, Dionysius Wilson Almeida wrote:
I tried inserting a udelay(1) and increasing the count ..but
the same behaviour.
any clues ? btw, i've been able to compile the redhat 7.1 intel e100
driver and it works fine for my card.
Your problem is different
From: kees [EMAIL PROTECTED]
What may happen on a SMP machine if a serial port has been closed and the
closing stage is at shutdown() in serial.c in the call to free_IRQ and
BEFORE the IRQ is really shutdown, a new character arrives which causes an
IRQ? Is it possible that the OTHER cpu
The first occurrence of this I didn't even notice until i checked my logs.
kernel BUG at slab.c:1244!
invalid operand:
CPU:0
EIP:0010:[c0126850]
EFLAGS: 00010082
eax: 001b ebx: c187f788 ecx: 0001 edx: 2765
esi: d9a5f000 edi: d9a5f9aa ebp: 00012800 esp:
In article [EMAIL PROTECTED],
Eric S. Raymond [EMAIL PROTECTED] wrote:
You're a bit irritated. That's good. I *want* people who don't write
help entries for their configuration symbols to be a bit irritated.
That way, they might get around to actually doing what they ought to.
You mean you
[EMAIL PROTECTED] wrote:
From: Jari Ruusu [EMAIL PROTECTED]
File backed loop device on 4k block size ext2 filesystem:
# dd if=/dev/zero of=file1 bs=1024 count=10
10+0 records in
10+0 records out
# losetup /dev/loop0 file1
# dd if=/dev/zero of=/dev/loop0
Mike Galbraith schrieb am Donnerstag, den 21. Juni 2001:
On Thu, 21 Jun 2001, Marcelo Tosatti wrote:
2 4 2 77084 1524 18396 66904 0 1876 108 2220 2464 66079 198 1
^
Ok, I suspect that GFP_BUFFER
Hello,
the attached patch fix a problem with fbgen when changing the
RGBA components but not the depth ; fbgen would not change
the colormap in this case, where it should.
--
romain
fbgen.patch.gz
Hello,
I've been trying to update my home (originally RedHat 7.0) linux server
from the 2.4.4 kernel to the 2.4.5 kernel. On other servers I've had no
problems at all, but for some reason my Gateway GP7-550 P-III at home is
being stubborn. I've reconfigured and rebuilt numerous times hoping
A lot of OS/2 software is written with this feature in mind. I know of one
programmer who absolutely hates Linux because it's just too difficult
porting software to it, and the lack of decent thread support is part of
the problem.
Yup. OS/2 is the largest nest of trained, experienced
Alexander Viro writes:
BTW, proc_net_create() is also not a good idea if you block the
interrupts. Ditto for netlink_kernel_create(), AFAICS (due to
netlink_kernel_creat() - sock_alloc() - get_empty_inode() -
kmem_cache_alloc() with SLAB_KERNEL).
That, BTW, is a nice illustration - it's
Hi,
Is there a reason for __FD_SETSIZE to be 1024 in
linux/posix_types.h and gnu/types.h ?
Why can't we increase this number by default ?
Shouldn't it be set to the real limit of the kernel ? (And let
applications define their own limit if there is a need for one ?)
PS The LKML faq remarks
Hello,
the following kernel-oops message I've found in my syslogs.
As it's a production system, I'd very happy for a feedback/help. If you need
further information, please let me know.
As I'm not on the list, please cc: me.
Christian.
Locking twice? But what happens if some program calls loop_set_status more
than once? Losetup doesn't, but if such program exists, locking is still
screwed.
No, it calls loop_release_xfer always before init_xfer, which will release
the permanent use count.
Calling lock twice in
At 1:43 PM +0200 2001-06-22, Erik Mouw wrote:
On Thu, Jun 21, 2001 at 10:30:40PM -0400, Rick Hohensee wrote:
Why does Linux have a mktime routine fully coded in linux/time.h that
conflicts directly with the ANSI C standard library routine of the same
name? It breaks a couple things against
At 9:51 AM -0400 2001-06-22, Stuart MacDonald wrote:
From: kees [EMAIL PROTECTED]
What may happen on a SMP machine if a serial port has been closed and the
closing stage is at shutdown() in serial.c in the call to free_IRQ and
BEFORE the IRQ is really shutdown, a new character arrives
From: Jonathan Lundell [EMAIL PROTECTED]
The other CPU servicing the interrupt, was the question. cli()
doesn't affect that. This could presumably happen if shutdown() gets
run on a non-interrupt-servicing CPU, or if interrupts are
dynamically routed (eg round-robin).
Ah. Missed that.
Hm.
On Fri, 22 Jun 2001, Walter Hofmann wrote:
Ok, I managed to press SysRq-T this time ond got a trace for my hang.
Symbols are resolved by klog. If you prefer ksymopps please tell me, I
used klog because ksymopps seems to drop all lines without symbols.
Someone else might want that and/or a
On Thursday 21 June 2001 18:49, Alan Cox wrote:
Except that Apple keeps the old code open. Probably because
they'll gain nothing from it, and at best, they can appeal to
the techies.
A company that seems to write 'you shall not work on open source projects
in your spare time' into its
Linux 2.4 BIOS usage reference
Boot Sequence
-
Linux is normally loaded either directly as a bootable floppy image or from
hard disk via a boot loader called lilo. The kernel image is transferred
into low memory and a parameter block above it.
When booting from floppy disk the
the attached patch fix a problem with fbgen when changing the
RGBA components but not the depth ; fbgen would not change
the colormap in this case, where it should.
It would be much easier to use a memcmp.
-
To unsubscribe from this list: send the line unsubscribe linux-kernel in
the body
** Reply to message from Alan Cox [EMAIL PROTECTED] on Fri, 22 Jun
2001 17:20:33 +0100 (BST)
Firstly a call is made to BIOS INT 15 AX=0xE820 in order to read the
E820 map. A maximum of 32 blocks are supported by current kernels. The
'SMAP' signature is required and tested. In addition the
On Sat, 23 Jun 2001, Chris Wedgwood wrote:
On Fri, Jun 22, 2001 at 04:59:36PM +0200, Dag Wieers wrote:
Is there a reason for __FD_SETSIZE to be 1024 in
linux/posix_types.h and gnu/types.h ?
Why can't we increase this number by default ?
It might break stuff, like things that
On Thursday 21 June 2001 14:46, Timur Tabi wrote:
1. License the Linux kernel under a different license that is effectively
the GPL but with additional text that clarifies the binary module issue.
Unfortunately, this license cannot be called the GPL. Politically, this
would probably be a
At 1:43 PM +0200 2001-06-22, Erik Mouw wrote:
On Thu, Jun 21, 2001 at 10:30:40PM -0400, Rick Hohensee wrote:
Why does Linux have a mktime routine fully coded in linux/time.h that
conflicts directly with the ANSI C standard library routine of the same
name? It breaks a couple things
On Sun, Jun 17, 2001 at 01:51:39PM +0530, SATHISH.J wrote:
Every file system has file_system_type structure defined. Where else this
structure is referred. Does register_filesystem() refer this structure. Does
sys_mount refer to this structure by any means?
For this and all your other
Luigi Genoni wrote:
I do not know if this is a new filesystem hierarchy, it should not be,
at less untill lsb finishes all discussion (anyway it is similar to lsb
standard). Your mail is a little confusing for me. Let's see if i can
clarify my ideas.
On Thu, 21 Jun 2001, D. Stimits
On Tue, 19 Jun 2001, Timur Tabi wrote:
Well, I didn't write the driver that I'm trying to port, so it's a little
difficult. The code in question is:
struct dentry * de = lookup_dentry(zfcdb[i].fullname, NULL, LOOKUP_FOLLOW);
if (IS_ERR(de))
continue;
if (de !=
1.3 Type 'apm -s'
The machine should standby
1.4 Wake it and type 'apm -S'
The machine should suspend
According to the man pages, apm -s does a suspend and apm -S does a
standby.
--
Brad Pepers
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line unsubscribe
Mike Galbraith schrieb am Freitag, den 22. Juni 2001:
6 5 1 77232 2692 2136 47004 560 892 2048 1524 10428 285529 2 98 0
^
Was disk running? (I bet not.. bet it stopped just after stall began)
There was no disk
Hi,
Thought I'd drop a line to say that I've started a project, over
on Sourceforge, entitled FOLK (Functionally Overloaded Linux Kernel),
which basically aims to stuff as many patches as humanly possible
into the Linux kernel, just to see what happens. :)
This is NOT intended as a
On Thu, Jun 21, 2001 at 05:08:24PM +0900, Tachino Nobuhiro wrote:
Thanks,
I'll try this patch.
Jeff
Hello,
At Thu, 21 Jun 2001 08:15:10,
Trevor Hemsley wrote:
On Thu, 21 Jun 2001 03:05:02, Jeff V. Merkey
[EMAIL PROTECTED] wrote:
Ditto. I am also seeing this oops
On Fri, 22 Jun 2001, Thomas Speck wrote:
Hi !
I have a problem with reading from a serial port using select() under
2.4.5. What I am doing is basically the following:
fd_set readfds;
struct timeval timeout;
int s;
serialfd = open(/dev/ttyS0, O_RDWR );
init_serial(B9600);
On Thursday 21 June 2001 16:34, Craig Milo Rogers wrote:
The in-core kernel image, including a dynamically-loaded
driver, is clearly a derived work per copyright law. As above, the
portion consisting only of the dynamically-loaded driver's binary code
may or may not be a derived work
I could not find any reference to BIOS int 0x15, function 0x87, block-
move, used to copy the kernel to above the 1 megabyte real-mode
boundary. I think this is still used.
I dont think the kernel has ever used it. The path has always been to enter
32bit mode then relocate/uncompress the
You've described a relatively complicated procedure well in this document.
My only suggestion would be to reference the applicable source code files
throughout the text, so that it's easy to find the associated code.
Thats a good idea . I'll fix that one up
Thanks to all the folks who sent
The existing build process for aic7xxx on Linux has several problems.
* Users have to manually select rebuild firmware. Relying on users
to perform any action other than make *config is unacceptable. It is
far too error prone.
* Rebuilding the firmware requires lex, yacc and libdb. Not
Who is maintaining the /dev/nvram driver? I have a couple things I want to
suggest/ask.
Currently it tracks O_EXCL on open() and sets a flag, whereby no other
open() calls can succeed. Is this functionality really needed? Perhaps it
should just be a reader/writer model : n readers or 1
On Tue, Jun 19, 2001, Dylan Griffiths [EMAIL PROTECTED] wrote:
Johannes Erdfelt wrote:
Could you load uhci with the debug=1 option?
I did an 'insmod uhci.o debug=1' but the dmesg output did not alter.
My easy steps to reproduce it is to 'delete selected images' in gphoto such
that there
Tim Hockin wrote:
Who is maintaining the /dev/nvram driver? I have a couple things I want to
suggest/ask.
I haven't seen any patches for ages to nvram, so I presume nobody.
What I really want to know is: should I bother making nvram_open_cnt SMP
safe, or should it just go away all
Followup to: [EMAIL PROTECTED]
By author:Richard B. Johnson [EMAIL PROTECTED]
In newsgroup: linux.dev.kernel
On Fri, 22 Jun 2001, Alan Cox wrote:
I could not find any reference to BIOS int 0x15, function 0x87, block-
move, used to copy the kernel to above the 1 megabyte real-mode
[EMAIL PROTECTED] (Rob Landley) wrote on 22.06.01 in
[EMAIL PROTECTED]:
On Thursday 21 June 2001 18:49, Alan Cox wrote:
Except that Apple keeps the old code open. Probably because
they'll gain nothing from it, and at best, they can appeal to
the techies.
A company that seems to
Hi.
The following patch #ifdefs a function to be in its preprocessor
scope and eliminates the use of check_region, adds '\n' to printk's,
adds checks for kmalloc and does error path resource releasing
in ip2_init_board. All in drivers/char/ip2main.c and against
245ac16.
(The kmalloc part of
Hi Andrey,
I'm attaching the log file.. please let me know if u need other
details.
-Wilson
* Andrey Savochkin ([EMAIL PROTECTED]) wrote:
On Thu, Jun 21, 2001 at 06:36:03PM -0700, Dionysius Wilson Almeida wrote:
I tried inserting a udelay(1) and increasing the count ..but
the same
Hi.
The patch below adds one instance of vmalloc return code checking
and a number of error path resource release cleanups in build_maps.
It is against 245-ac16.
(The vmalloc non-check was reported by the Stanford team a
while back.)
--- linux-245-ac16-clean/drivers/mtd/ftl.c Sun May 27
Hi Rasmus,
I've fixed this ones and its already in 2.4.6-pre5, please take a
look and see if something is missing.
- Arnaldo
Em Fri, Jun 22, 2001 at 10:29:31PM +0200, Rasmus Andersen escreveu:
Hi.
The patch below adds one instance of vmalloc return code checking
and a number of
101 - 200 of 259 matches
Mail list logo