Sorry for late response. I should have hurried.
I just sent by my comment of your previous version's mail thread.
Please look at it.
On Wed, Nov 28, 2012 at 11:48:30PM -0800, Nitin Gupta wrote:
> Changelog v2 vs v1
> - None
>
> Adds zs_get_object_size(handle) which provides the size of
> the
On Wed, 28 Nov 2012 14:52:38 +0100, Jiri Olsa wrote:
> Currently we don't properly display hist data with
> symbol_conf.field_sep separator. We need to display
> either space or separator.
>
> Signed-off-by: Jiri Olsa
> Cc: Arnaldo Carvalho de Melo
> Cc: Peter Zijlstra
> Cc: Ingo Molnar
> Cc:
Hi Nitin,
On Wed, Nov 28, 2012 at 11:45:06PM -0800, Nitin Gupta wrote:
> Changelog v2 vs v1:
> - Changelog message now correctly explains the problem
>
> Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling
> of incompressible pages") which caused a freed buffer to be used
> in case
On Tue, Nov 20, 2012 at 3:05 AM, Omar Ramirez Luna wrote:
> These patches are needed for remoteproc to work on OMAP4.
>
> Introduced iommu hwmod support for OMAP3 (iva, isp) and
> OMAP4 (ipu, dsp), along with the corresponding runtime PM
> and routines to deassert reset lines, enable/disable
Changelog v2 vs v1:
- Use is_zero_page() instead of direct handle comparison
- Use 1 as invalid handle value instead of -1 since handle
is unsigned and thus -1 may refer to a valid object. While 1
is guaranteed to be invalid since can never
refer to (end of) a valid object.
- Remove references
Changelog v2 vs v1
- None
Adds zs_get_object_size(handle) which provides the size of
the given object. This is useful since the user (zram etc.)
now do not have to maintain object sizes separately, saving
on some metadata size (4b per page).
The object handle encodes pair which currently
On Thu, Nov 29, 2012 at 12:53:56AM +, Dave Hansen wrote:
>
> In short, it is illegal to call __pa() on an address holding
> a percpu variable. The times when this actually matters are
> pretty obscure (certain 32-bit NUMA systems), but it _does_
> happen. It is important to keep KVM guests
Hi Doug,
On Thursday, November 29, 2012, Doug Anderson wrote:
> Seungwon,
>
> Thanks for the review. See below for comments. If you'd like me to
> respin then please let me know. Otherwise I look forward to your ack.
>
> On Wed, Nov 28, 2012 at 1:29 AM, Seungwon Jeon wrote:
> > Yes. pin of
On Wed November 28 2012 20:30:21 Greg Kroah-Hartman wrote:
> On Wed, Nov 28, 2012 at 08:18:20PM +0100, Hans Verkuil wrote:
> > On Wed November 28 2012 18:22:48 Greg Kroah-Hartman wrote:
> > > On Wed, Nov 28, 2012 at 10:18:02AM -0200, Mauro Carvalho Chehab wrote:
> > > > Em Wed, 28 Nov 2012
Changelog v2 vs v1:
- Changelog message now correctly explains the problem
Fixes a bug introduced by commit c8f2f0db1 ("zram: Fix handling
of incompressible pages") which caused a freed buffer to be used
in case a partial write (non PAGE_SIZED) request is received and
the data is found to be
On Mon, Nov 26, 2012 at 11:26:40PM -0800, Nitin Gupta wrote:
> Adds zs_get_object_size(handle) which provides the size of
> the given object. This is useful since the user (zram etc.)
> now do not have to maintain object sizes separately, saving
> on some metadata size (4b per page).
>
> The
Hi Jiri,
On Wed, 28 Nov 2012 14:52:36 +0100, Jiri Olsa wrote:
> Adding perf_hpp__list list to register and contain all period
> related columns the command is interested in.
>
> This way we get rid of static array holding all possible
> columns and enable commands to register their own columns.
On Thu November 29 2012 00:47:41 Sylwester Nawrocki wrote:
> On 11/28/2012 10:29 PM, Dan Carpenter wrote:
> > On Wed, Nov 28, 2012 at 08:30:04PM +0100, Sylwester Nawrocki wrote:
> >> On 11/28/2012 01:22 PM, Dan Carpenter wrote:
> >>> In the end this is just a driver, and I don't especially care.
Hi Jiri,
On Wed, Nov 28, 2012 at 5:18 AM, Jiri Slaby wrote:
> Hi,
>
> I've hit BUG_ON(atomic_dec_and_test(_zero_refcount)) in
> put_huge_zero_page right now. There are some "Bad rss-counter state"
> before that, but those are perhaps unrelated as I saw many of them in
> the previous -next. But
On 11/26/2012 09:19 PM, Terje Bergström wrote:
> Add client driver for 2D device.
>
> Signed-off-by: Arto Merilainen
> Signed-off-by: Terje Bergstrom
>
> ---
>
[...]
> +
> +static int
> +tegra_drm_ioctl_open_channel(struct drm_device *drm, void *data,
> + struct drm_file
On 11/29/2012 02:53 PM, Jim Meyering wrote:
> Jeff Liu wrote:
>
>> On 11/29/2012 12:15 PM, Jim Meyering wrote:
>>> Hugh Dickins wrote:
On Thu, 29 Nov 2012, Jaegeuk Hanse wrote:
>>> ...
> But this time in which scenario will use it?
I was not very convinced by the grep argument
On Thu, Nov 29, 2012 at 05:19:39PM +1100, Stephen Rothwell wrote:
> Hi Andrew,
>
> After merging the akpm tree, today's linux-next build (x86_64
> allmodconfig) produced these warnings:
> In file included from drivers/block/drbd/drbd_bitmap.c:32:0:
> drivers/block/drbd/drbd_int.h:2339:0:
Hi all,
We encounter a "Resource temporarily unavailable" fail while trying
to offline a memory section in a movable zone. We found that there are
some pages can't be migrated. The offline operation fails in function
migrate_page_move_mapping() returning -EAGAIN till timeout because
the if
Jeff Liu wrote:
> On 11/29/2012 12:15 PM, Jim Meyering wrote:
>> Hugh Dickins wrote:
>>> On Thu, 29 Nov 2012, Jaegeuk Hanse wrote:
>> ...
But this time in which scenario will use it?
>>>
>>> I was not very convinced by the grep argument from Jim and Paul:
>>> that seemed to be grep holding
On Thu, Nov 29, 2012 at 04:29:45PM +1100, Stephen Rothwell wrote:
> Hi Thierry,
>
> Today's linux-next merge of the pwm tree got a conflict in
> drivers/pwm/pwm-twl6030.c between commit fd1091125a1d ("pwm: remove use
> of __devexit_p") from the driver-core tree and commit 6179a58ec7e2 ("pwm:
>
On Thu, Nov 29, 2012 at 04:27:30PM +1100, Stephen Rothwell wrote:
> Hi Thierry,
>
> Today's linux-next merge of the pwm tree got a conflict in
> drivers/pwm/pwm-tiehrpwm.c between commit 3e9fe83d278c ("pwm: remove use
> of __devinit") from the driver-core tree and commit 53ad9e8d3703 ("pwm:
>
On Thu, Nov 29, 2012 at 04:25:14PM +1100, Stephen Rothwell wrote:
> Hi Thierry,
>
> Today's linux-next merge of the pwm tree got a conflict in
> drivers/pwm/pwm-tiecap.c between commit 3e9fe83d278c ("pwm: remove use of
> __devinit") from the driver-core tree and commit 333b08ee8c6e ("pwm:
>
On Wed, Nov 28, 2012 at 10:37:27PM -0800, Linus Torvalds wrote:
> On Wed, Nov 28, 2012 at 10:30 PM, Al Viro wrote:
> >
> > Note that sync_blockdev() a few lines prior to that is good only if we
> > have no other processes doing write(2) (or dirtying the mmapped pages,
> > for that matter). The
On Wed, 28 Nov 2012 19:07:46 +0100
Stephen Warren wrote:
..
> >>> Please read more about bus notifiers. IMHO a good example is provided in
> >>> the following thread:
> >>> http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg12238.html
> >>
> >> This bus notifier seems enough
From: Namhyung Kim
Fix a misplaced underscore. In this case, 'hist_entry' is the name of
data structure and we usually put double underscores between data
structure and actual function name.
Signed-off-by: Namhyung Kim
---
tools/perf/util/hist.c | 4 ++--
tools/perf/util/sort.h | 2 +-
2
From: Namhyung Kim
Save group relationship information so that it can be restored when
perf report is running.
Cc: Jiri Olsa
Cc: Stephane Eranian
Acked-by: Jiri Olsa
Signed-off-by: Namhyung Kim
---
tools/perf/builtin-record.c | 3 +
tools/perf/util/header.c| 153
From: Namhyung Kim
Current hists__match/link() link a leader to its pair, so if multiple
pairs were linked, the leader will lose pointer to previous pairs
since it was overwritten. Fix it by making leader the list head.
Cc: Jiri Olsa
Cc: Stephane Eranian
Signed-off-by: Namhyung Kim
---
From: Namhyung Kim
When comparing entries for collapsing put the given entry first, and
then the iterated entry. This is for the sake of consistency and will
be required by the event group report.
Cc: Jiri Olsa
Cc: Stephane Eranian
Signed-off-by: Namhyung Kim
---
tools/perf/util/hist.c | 2
Hi all,
This is my 6th iteration of event group view patchset.
For basic idea and usage example, please see my original post [1].
The largest change in this version is using 'pairs' list of hist_entry
instead of allocating group_stats for all group members. But I needed
to allocate temporary
From: Namhyung Kim
The event_group field is for enabling event group view on perf report
and other commands. It requires collapsing hist entries since every
member in a group needs to be linked before final output resorting.
Cc: Jiri Olsa
Cc: Stephane Eranian
Signed-off-by: Namhyung Kim
---
From: Namhyung Kim
The current hists__match/link functions are worked on the output tree
(hists->entries). However for event group view it needs to be
matched/linked before the final resort. Thus add new helpers for
doing it on the collapsed tree.
Cc: Jiri Olsa
Cc: Stephane Eranian
From: Namhyung Kim
Now the event grouping viewing requires linking all member hists in a
group to the leader's. Thus hists__output_resort should be called
after linking all events in evlist.
Cc: Jiri Olsa
Cc: Stephane Eranian
Signed-off-by: Namhyung Kim
---
tools/perf/builtin-report.c | 13
This patch supports the TPS65910 PMU function on the AM3517 Craneboard.
The IRQ pin, SYS_NIRQ is dedicated connection between the AM3517 and
the TPS65910 PMU.
To handle the PMU IRQs, mux configuration is required.
Platform data configuration:
.IRQ number : SYS_NIRQ (M_IRQ_7)
.External
From: Namhyung Kim
When event group is enabled, sorting hist entries on periods for
output should consider groups members' period also. To do that, build
period table using link/pair information and compare the table.
Cc: Jiri Olsa
Cc: Stephane Eranian
Signed-off-by: Namhyung Kim
---
From: Namhyung Kim
Add a few of group-related field in struct perf_{evlist,evsel} so that
the group information in a evlist can be known easily. It only counts
groups which have more than 1 members since leader-only groups are
treated as non-group events.
Cc: Jiri Olsa
Cc: Stephane Eranian
The interrupt status registers of TPS65910/1 should be cleared
when the associated interrupt event occurs.
This work is done in the regmap irq thread - using 'ack_base' register.
The ACK registers should be fixed as status register, not mask registers.
This patch fixes the infinite interrupt
On Wed, Nov 28, 2012 at 03:31:58PM -0800, Andrew Morton wrote:
> On Wed, 28 Nov 2012 20:21:26 +0100
> Thierry Reding wrote:
>
> > + err = i2c_transfer(client->adapter, , 1);
> > + if (err < 0) {
> > + /*
> > +* If the time cannot be set, restart the RTC anyway. Note
> >
This patch enables the NAND device on the AM3517 Craneboard.
MTD partitions are created as below.
0x-0x0008 : "X-Loader"
0x0008-0x0024 : "U-Boot"
0x0024-0x0028 : "U-Boot Env"
0x0028-0x0078 : "Kernel"
From: Namhyung Kim
Convert perf_evsel__is_group_member to perf_evsel__is_group_leader.
This is because the most usecases are using negative form to check
whether the given evsel is a leader or not and it's IMHO somewhat
ambiguous - leader also *is* a member of the group.
Signed-off-by: Namhyung
From: Namhyung Kim
Add --group option to enable event grouping. When enabled, all the
group members information will be shown together with the leader.
Cc: Jiri Olsa
Cc: Stephane Eranian
Acked-by: Jiri Olsa
Signed-off-by: Namhyung Kim
---
tools/perf/Documentation/perf-report.txt | 3 +++
From: Namhyung Kim
Add report.group config option for setting default value of event
group view. It affects the report output only if perf.data contains
event group info.
A user can write .perfconfig file like below to enable group view by
default:
$ cat ~/.perfconfig
[report]
group =
From: Namhyung Kim
Currently only non-leader members are set ->leader to the leader evsel
of the group and the leader has set NULL. Thus it requires special
casing for leader evsels. Set ->leader to itself will remove this.
Suggested-by: Arnaldo Carvalho de Melo
Cc: Jiri Olsa
Cc: Stephane
From: Namhyung Kim
When using event group viewer, it's better to show the group
description rather than the leader information alone.
If a leader did not contain any member, it's a non-group event.
Cc: Jiri Olsa
Cc: Stephane Eranian
Cc: Pekka Enberg
Acked-by: Jiri Olsa
Signed-off-by:
From: Namhyung Kim
Show group members' overhead also when showing the leader's if event
group is enabled. Use macro for defining hpp functions which looks
almost identical.
Cc: Jiri Olsa
Cc: Stephane Eranian
Cc: Pekka Enberg
Signed-off-by: Namhyung Kim
---
tools/perf/ui/gtk/browser.c | 87
From: Namhyung Kim
Since we have all necessary information in the leader events and
other members don't, bypass members. Member events will be shown
along with the leaders if event group is enabled.
Cc: Jiri Olsa
Cc: Stephane Eranian
Cc: Pekka Enberg
Acked-by: Jiri Olsa
Signed-off-by:
From: Namhyung Kim
Show group members' overhead also when showing the leader's if event
group is enabled. Use macro for defining hpp functions which looks
almost identical.
Cc: Jiri Olsa
Cc: Stephane Eranian
Signed-off-by: Namhyung Kim
---
tools/perf/ui/browsers/hists.c | 171
From: Namhyung Kim
Show group members' overhead also when showing the leader's if event
group is enabled. Use macro for defining hpp functions which looks
almost identical.
Cc: Jiri Olsa
Cc: Stephane Eranian
Signed-off-by: Namhyung Kim
---
tools/perf/ui/hist.c | 370
Hi all,
This is my 6th iteration of event group view patchset.
For basic idea and usage example, please see my original post [1].
The largest change in this version is using 'pairs' list of hist_entry
instead of allocating group_stats for all group members. But I needed
to allocate temporary
Hi all,
This is my 6th iteration of event group view patchset.
For basic idea and usage example, please see my original post [1].
The largest change in this version is using 'pairs' list of hist_entry
instead of allocating group_stats for all group members. But I needed
to allocate temporary
On Wed, Nov 28, 2012 at 10:30 PM, Al Viro wrote:
>
> Note that sync_blockdev() a few lines prior to that is good only if we
> have no other processes doing write(2) (or dirtying the mmapped pages,
> for that matter). The window isn't too wide, but...
So with Mikulas' patches, the write actually
set_anon_super does not use the second parameter in its implementation.
So there is no need to pass on the second parameter.
Signed-off-by: Abhijit Pawar
---
fs/sysfs/mount.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index
On Wed, Nov 28, 2012 at 10:25 PM, Al Viro wrote:
>
> Umm... set_blocksize() is calling kill_bdev(), which does
> truncate_inode_pages(mapping, 0). What's going to happen to data in
> the dirty pages? IO in progress is not the only thing to worry about...
Hmm. Yes. I think it works by
set_anon_super does not use the second parameter in its implementation.
So there is no need to pass on the second parameter.
Signed-off-by: Abhijit Pawar
---
fs/nfs/super.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index
On Thu, Nov 29, 2012 at 06:25:19AM +, Al Viro wrote:
> Umm... set_blocksize() is calling kill_bdev(), which does
> truncate_inode_pages(mapping, 0). What's going to happen to data in
> the dirty pages? IO in progress is not the only thing to worry about...
Note that sync_blockdev()
set_anon_super does not use the second parameter in its implementation.
So there is no need to pass on the second parameter.
Signed-off-by: Abhijit Pawar
---
fs/btrfs/super.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index
于 2012年11月29日 14:14, Joe Perches 写道:
> Signed-off-by: Joe Perches
> ---
> MAINTAINERS |1 +
> 1 files changed, 1 insertions(+), 0 deletions(-)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index afc0b27..255dafb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7658,6 +7658,7 @@ K:
Hi all,
After merging the final tree, today's linux-next build (powerpc
allyesconfig) produced this warning:
sound/soc/codecs/wm_adsp.c: In function 'wm_adsp2_event':
sound/soc/codecs/wm_adsp.c:556:4: warning: suggest parentheses around
comparison in operand of '&' [-Wparentheses]
Introduced
On Wed, Nov 28, 2012 at 10:16:21PM -0800, Linus Torvalds wrote:
> On Wed, Nov 28, 2012 at 6:58 PM, Linus Torvalds
> wrote:
> >
> > But the fact that the code wants to do things like
> >
> > block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits);
> >
> > seriously seems to be the main
On Thu, Nov 29, 2012 at 08:14:13AM +0200, Kirill A. Shutemov wrote:
> On Wed, Nov 28, 2012 at 02:29:08AM -0800, Anton Vorontsov wrote:
> > +static int mpc_pre_destroy(struct cgroup *cg)
> > +{
> > + struct mpc_state *mpc = cg2mpc(cg);
> > + int ret = 0;
> > +
> > + mutex_lock(>lock);
> > +
>
On Tuesday 27 November 2012 12:29 PM, Sivaram Nair wrote:
This is a cleaning up patch that removes couple of functions in
mach/clk.h that are no longer used and does not have any body.
Signed-off-by: Sivaram Nair
---
arch/arm/mach-tegra/include/mach/clk.h |5 -
1 file changed, 5
Hi Andrew,
After merging the akpm tree, today's linux-next build (x86_64
allmodconfig) produced these warnings:
In file included from drivers/block/drbd/drbd_bitmap.c:32:0:
drivers/block/drbd/drbd_int.h:2339:0: warning: "__wait_event_lock_irq"
redefined [enabled by default]
On Wed, Nov 28, 2012 at 6:58 PM, Linus Torvalds
wrote:
>
> But the fact that the code wants to do things like
>
> block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits);
>
> seriously seems to be the main thing that keeps us using
> 'inode->i_blkbits'. Calculating bbits from
On 11/27/2012 11:03 PM, Dan Carpenter wrote:
> No need to memset() this when we just copy over it on the next line.
>
> Signed-off-by: Dan Carpenter
>
> diff --git a/drivers/scsi/csiostor/csio_lnode.c
> b/drivers/scsi/csiostor/csio_lnode.c
> index 551959e..8b54976 100644
> ---
Hi Vinod,
After merging the slave-dma tree, today's linux-next build (x86_64
allmodconfig) produced these warning:
drivers/dma/dmaengine.c: At top level:
include/linux/of_dma.h:47:12: warning: 'of_dma_controller_register' defined but
not used [-Wunused-function]
include/linux/of_dma.h:55:12:
Signed-off-by: Joe Perches
---
MAINTAINERS |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index afc0b27..255dafb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7658,6 +7658,7 @@ K:^Subject:.*(?i)trivial
TTY LAYER
M: Greg
On Wed, Nov 28, 2012 at 02:29:08AM -0800, Anton Vorontsov wrote:
> +static int mpc_pre_destroy(struct cgroup *cg)
> +{
> + struct mpc_state *mpc = cg2mpc(cg);
> + int ret = 0;
> +
> + mutex_lock(>lock);
> +
> + if (mpc->eventfd)
> + ret = -EBUSY;
cgroup_rmdir() will
On Tuesday 27 November 2012 12:29 PM, Sivaram Nair wrote:
This patch moves some stuff away from mach/clk.h to other mach-tegra
files. This is part of the efforts to get rid of mach/clk.h which in
turn will help to enable single zImage.
Signed-off-by: Sivaram Nair
---
On Wed, 2012-11-28 at 13:42 -0600, Nathan Fontenot wrote:
> The of reconfiguration notification chains should be exported for use
> by modules.
>
> Signed-off-by:Nathan Fontenot
Grant, I'm applying that into the powerpc tree (with a slightly modified
subject line). You don't need to add it to
set_anon_super does not use the second parameter in its implementation.
So there is no need to pass on the second parameter.
Signed-off-by: Abhijit Pawar
---
fs/9p/vfs_super.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index
于 2012年11月29日 13:13, Greg KH 写道:
> On Thu, Nov 29, 2012 at 12:40:49PM +0800, Chen Gang wrote:
>> Hello Greg Kroah-Hartman:
>>
>> for MAX_ASYNC_BUFFER_SIZE:
>> it is defined as 4096;
>> but for the max buffer size which it processes, is 65535.
>> so suggest to #define MAX_ASYNC_BUFFER_SIZE
On 11/23/2012 05:09 PM, Haojian Zhuang wrote:
On Tue, Nov 6, 2012 at 3:35 PM, Qing Xu wrote:
From: Qing Xu
1. add irqdomain for max8925, it is necessary for dt support
2. bug fix in max8925 mfd devices'irq base and device registry failure
3. support DT for max8925 mfd devices
Qing Xu (7):
From: Qing Xu
add docs for dt of max8925-mfd, max8925-backlight, and
max8925-battery
Signed-off-by: Qing Xu
---
Documentation/devicetree/bindings/mfd/max8925.txt | 64
.../bindings/power_supply/max8925_batter.txt | 18 ++
On Wednesday, November 28, 2012 11:25:41 AM Jiri Slaby wrote:
> Hi,
>
> with this commit:
> commit c8d68e6be1c3b242f1c598595830890b65cea64a
> Author: Jason Wang
> Date: Wed Oct 31 19:46:00 2012 +
>
> tuntap: multiqueue support
>
>
> I see fork bombs from udev. It is trying to create
On Thursday, November 29, 2012 6:47 AM, Marko Katic wrote
> Subject: [PATCH] backlight: corgi_lcd: Fix WARN_ON() when calling
> corgi_bl_set_intensity.
CC'ed Andrew Morton.
Hi Marko Katic,
The commit subject and commit message are not clear.
How about using subject as below?
backlight:
Hi Thierry,
Today's linux-next merge of the pwm tree got a conflict in
drivers/pwm/pwm-twl6030.c between commit fd1091125a1d ("pwm: remove use
of __devexit_p") from the driver-core tree and commit 6179a58ec7e2 ("pwm:
Remove pwm-twl6030 driver") from the pwm tree.
I fixed it up (the latter
Hi Thierry,
Today's linux-next merge of the pwm tree got a conflict in
drivers/pwm/pwm-tiehrpwm.c between commit 3e9fe83d278c ("pwm: remove use
of __devinit") from the driver-core tree and commit 53ad9e8d3703 ("pwm:
tiehrpwm: Add device-tree binding") from the pwm tree.
I fixed it up (see below)
Hi Thierry,
Today's linux-next merge of the pwm tree got a conflict in
drivers/pwm/pwm-tiecap.c between commit 3e9fe83d278c ("pwm: remove use of
__devinit") from the driver-core tree and commit 333b08ee8c6e ("pwm:
tiecap: Add device-tree binding") from the pwm tree.
I fixed it up (see below) and
This is required since commit f7df20ec32
"regulator: core: Use list_voltage() to read single voltage regulators",
otherwise _regulator_get_voltage returns rdev->desc->ops->list_voltage(rdev, 0).
The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
the set up value. Thus
On Thu, Nov 29, 2012 at 02:43:02PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/gpio/gpio-tps6586x.c between commit fe39f2f4dc84 ("mfd: Implement
> tps6586x gpio_to_irq") from the mfd tree and commit 3836309d9346
On Thu, Nov 29, 2012 at 02:47:12PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/mfd/ab8500-core.c between commit 8ae754ebd5ed ("mfd: ab8500-core:
> Remove unused ab8500-gpio IRQ ranges") from the mfd tree and commit
>
On Thu, Nov 29, 2012 at 02:57:14PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/mfd/sta2x11-mfd.c between various commits from the mfd tree and
> commits f791be492f76 ("mfd: remove use of __devinit"), a9e9ce4c4167
>
On Thu, Nov 29, 2012 at 02:50:39PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/mfd/da9052-core.c between commit 8bad1abd6303 ("mfd: da9052:
> Introduce da9052-irq.c") from the mfd tree and commit a9e9ce4c4167 ("mfd:
>
On Thu, Nov 29, 2012 at 03:00:44PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/mfd/tps65090.c between various commits from the mfd tree and
> commits 84449216b01f ("mfd: remove use of __devexit_p"), f791be492f76
>
On Thu, Nov 29, 2012 at 03:03:40PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/pci/pci.h between commit 4e15c46bdc4d ("PCI: Add pci_device_type
> to pdev's device struct") from the pci tree and commit b40b97ae736c
>
On Thu, Nov 29, 2012 at 03:06:41PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/pci/quirks.c between commit 21c5fd97380b ("PCI: Add workaround
> for PLX PCI 9050 BAR alignment erratum") from the pci tree and commit
>
On Thu, Nov 29, 2012 at 03:09:33PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/power/ab8500_btemp.c between commit bd9e8ab2d58d ("ab8500: Add
> devicetree support for btemp") from the battery tree and commit
>
On Thu, Nov 29, 2012 at 03:11:42PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/power/ab8500_charger.c between commit 4aef72dbb2e8 ("ab8500: Add
> devicetree support for charger") from the battery tree and commit
>
On Thu, Nov 29, 2012 at 03:15:58PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/power/abx500_chargalg.c between commit a12810ab9fcf ("ab8500: Add
> devicetree support for chargalg") from the battery tree and commit
>
On Thu, Nov 29, 2012 at 03:13:36PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/power/ab8500_fg.c between commit e0f1abeba5c2 ("ab8500: Add
> devicetree support for fuelgauge") from the battery tree and commit
>
On Thu, Nov 29, 2012 at 03:18:04PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/power/da9052-battery.c between commit 4b5edf7887c6 ("power:
> da9052-battery: Convert to the new da9052 interrupt functions") from the
>
On Thu, Nov 29, 2012 at 03:20:08PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> drivers/power/max8925_power.c between commit eba3b670a916
> ("max8925_power: Add support for device-tree initialization") from the
> battery tree
On Thu, Nov 29, 2012 at 03:24:11PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the driver-core tree got a conflict in
> lib/Makefile between commit e6459606b04e ("lib: Add early cpio decoder")
> from the tip tree and commit 610141ee651c ("lib: kobject_uevent is no
>
On Thu, Nov 29, 2012 at 09:16:06AM +0530, Viresh Kumar wrote:
> On 29 November 2012 09:10, Stephen Rothwell wrote:
> > diff --cc drivers/dma/dw_dmac.c
>
> > +#ifdef CONFIG_OF
> > +static struct dw_dma_platform_data *
> > +__devinit dw_dma_parse_dt(struct platform_device *pdev)
>
> Do we need
On Thu, Nov 29, 2012 at 04:03:09PM +1100, Stephen Rothwell wrote:
> Hi all,
>
> Today's linux-next merge of the arm-soc tree got a conflict in
> drivers/leds/leds-ns2.c between commit 98ea1ea20cb7 ("leds: remove use of
> __devinit") from the driver-core tree and commit 72052fcc1026 ("leds:
>
On Thu, Nov 29, 2012 at 03:57:23PM +1100, Stephen Rothwell wrote:
> Hi Grant,
>
> Today's linux-next merge of the gpio tree got a conflict in
> drivers/gpio/gpio-em.c between commit 3836309d9346 ("gpio: remove use of
> __devinit") from the driver-core tree and commit 7385500a49b7 ("gpio/em:
>
On Thu, Nov 29, 2012 at 03:47:39PM +1100, Stephen Rothwell wrote:
> Hi Greg,
>
> Today's linux-next merge of the staging tree got a conflicts in
> drivers/staging/fwserial/fwserial.c, drivers/staging/Kconfig and
> drivers/staging/Kconfig between commit 7355ba3445f2 ("staging: fwserial:
> Add
This is required since commit f7df20ec32
"regulator: core: Use list_voltage() to read single voltage regulators",
otherwise _regulator_get_voltage returns rdev->desc->ops->list_voltage(rdev, 0).
The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
the set up value. Thus
On Thu, Nov 29, 2012 at 12:40:49PM +0800, Chen Gang wrote:
> Hello Greg Kroah-Hartman:
>
> for MAX_ASYNC_BUFFER_SIZE:
> it is defined as 4096;
> but for the max buffer size which it processes, is 65535.
> so suggest to #define MAX_ASYNC_BUFFER_SIZE 0x1 (better than 0x)
Please,
Hello Greg Kroah-Hartman:
for MAX_ASYNC_BUFFER_SIZE:
it is defined as 4096;
but for the max buffer size which it processes, is 65535.
so suggest to #define MAX_ASYNC_BUFFER_SIZE 0x1 (better than 0x)
I use 3 Step to prove it, please see below:
by the way:
I find it only
From: Simon Glass
The arbitrator is a general purpose function which uses two GPIOs to
communicate with another device to claim/release a bus. We use it to
arbitrate an i2c port between the AP and the EC.
Signed-off-by: Simon Glass
Cc: Grant Grundler
Signed-off-by: Naveen Krishna Chatradhi
1 - 100 of 1640 matches
Mail list logo
