Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX7D_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SLL_CLK_SDMA result in driver incorrectly thinking that
ratio is 1:1 which
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which
Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb"
clock to determine if it needs to configure the IP block as operating
at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both
clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that
ratio is 1:1 which
Commit-ID: 02562d0ca1084a688ac5c92e0e92947f62f13093
Gitweb: https://git.kernel.org/tip/02562d0ca1084a688ac5c92e0e92947f62f13093
Author: Ard Biesheuvel
AuthorDate: Thu, 28 Mar 2019 20:34:29 +0100
Committer: Ingo Molnar
CommitDate: Fri, 29 Mar 2019 07:35:00 +0100
efi/libstub/arm: Omit
Commit-ID: 0fca08122eaf5c956a2cbe12775245d747f8b1ac
Gitweb: https://git.kernel.org/tip/0fca08122eaf5c956a2cbe12775245d747f8b1ac
Author: Robert Richter
AuthorDate: Thu, 28 Mar 2019 20:34:28 +0100
Committer: Ingo Molnar
CommitDate: Fri, 29 Mar 2019 07:35:00 +0100
efi: Unify DMI setup
Commit-ID: 5e83cfe947444c7f201f8c39ce0189922ec9f578
Gitweb: https://git.kernel.org/tip/5e83cfe947444c7f201f8c39ce0189922ec9f578
Author: Marcin Benka
AuthorDate: Thu, 28 Mar 2019 20:34:27 +0100
Committer: Ingo Molnar
CommitDate: Fri, 29 Mar 2019 07:35:00 +0100
efi/arm: Show SMBIOS
Talked to Michal, the local code refactorying may impact those big
feature or improvement patchset, e.g patch 2/4 and patch 3/4 will
conflict with Dan's patchset:
[PATCH v5 00/10] mm: Sub-section memory hotplug support
So I would like to discard them and only repost patch 1/4 and 4/4 after
Commit-ID: c2999c281ea2d2ebbdfce96cecc7b52e2ae7c406
Gitweb: https://git.kernel.org/tip/c2999c281ea2d2ebbdfce96cecc7b52e2ae7c406
Author: Ard Biesheuvel
AuthorDate: Thu, 28 Mar 2019 20:34:26 +0100
Committer: Ingo Molnar
CommitDate: Fri, 29 Mar 2019 07:34:59 +0100
efifb: Omit memory map
Creates plane alpha and blend mode properties attached to plane.
Signed-off-by: Lowry Li
---
drivers/gpu/drm/arm/display/komeda/komeda_plane.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_plane.c
Commit-ID: e8d368ad20f514dce86a64931fe4a6f06a0a6703
Gitweb: https://git.kernel.org/tip/e8d368ad20f514dce86a64931fe4a6f06a0a6703
Author: Masahiro Yamada
AuthorDate: Thu, 28 Mar 2019 20:34:25 +0100
Committer: Ingo Molnar
CommitDate: Fri, 29 Mar 2019 07:34:59 +0100
efi/libstub: Refactor
On Wed, Mar 27, 2019 at 4:17 AM Fabio Estevam wrote:
>
> Hi Andrey,
>
> On Tue, Mar 26, 2019 at 11:52 PM Andrey Smirnov
> wrote:
>
> > I think it is worth fixing in DT, regardless if we do anything about
> > SDMA driver or not. I'll add fixes for 6SX and 7D in v2.
>
> What about imx25, imx31,
On 03/29/19 at 01:45pm, Pingfan Liu wrote:
> On Fri, Mar 22, 2019 at 4:34 PM Baoquan He wrote:
> >
> > On 03/22/19 at 03:52pm, Baoquan He wrote:
> > > On 03/22/19 at 03:43pm, Pingfan Liu wrote:
> > > > > > +/* parse crashkernel=x@y option */
> > > > > > +static void
On Fri, Mar 29, 2019 at 04:09:22AM +0100, Marek Behun wrote:
> Hello Tejun and Greg,
>
> kernfs_fop_open/read/write allocates a buffer for the ->read, ->write,
> or ->seq_read methods. This buffer is either preallocated or allocated
> on the spot, with minimum size being PAGE_SIZE, if
Currently, when irq_domain_add_linear() fails, the error code does not
get so it returns zero which is wrong. Fix it by setting appropriate
error code.
Fixes: 9e543e22e204 ("irqchip: Add driver for Loongson-1 interrupt controller")
Signed-off-by: Dan Carpenter
Reviewed-by: Mukesh Ojha
---
V2:
On Fri, 22 Mar 2019 06:25:09 PDT (-0700), Christoph Hellwig wrote:
Looks good,
Reviewed-by: Christoph Hellwig
Thanks. I've added this to my fixes list for the next RC.
Btw, what is the 32-bit test vehicle of choice? qemu with the
virt machine?
Hi Rob,
On 28/03/19 11:37 PM, Rob Herring wrote:
> On Mon, Mar 25, 2019 at 01:38:13PM +0530, Kishon Vijay Abraham I wrote:
>> AM654x has two SERDES instances. Each instance has three input clocks
>> (left input, externel reference clock and right input) and two output
>> clocks (left output and
Hi Lorenzo,
Thanks a lot for your comments!
> -Original Message-
> From: Lorenzo Pieralisi
> Sent: 2019年3月29日 0:09
> To: Z.q. Hou
> Cc: linux-...@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
> devicet...@vger.kernel.org; linux-kernel@vger.kernel.org;
> bhelg...@google.com;
This is so close! There are just one or two tiny things.
On Thu, Mar 28, 2019 at 1:20 PM Rushikesh S Kadam
wrote:
>
> This driver adds support for loading Intel Integrated
> Sensor Hub (ISH) firmware from host file system to ISH
> SRAM and start execution.
>
> At power-on, the ISH subsystem
901 - 920 of 920 matches
Mail list logo