On 5/28/2019 2:13 PM, Marc Gonzalez wrote:
On 27/05/2019 12:26, Vivek Gautam wrote:
MTP SDM845 panel seems to need additional delay to bring panel
to a workable state. Running modetest without this change displays
blurry artifacts.
Signed-off-by: Vivek Gautam
---
The addition of VM_FLUSH_RESET_PERMS for BPF JIT allocations was
bisected to prevent boot on an UltraSparc III machine. It was found that
sometime shortly after the TLB flush this flag does on vfree of the BPF
program, the machine hung. Further investigation showed that before any of
the changes
Hi Sowjanya,
usleep_range() in tegra210_pmc_irq_set_wake() should be replaced with
udelay() because caller irq_set_irq_wake() acquired spinlock and made
this context atomic.
Thanks,
JC
On 5/29/19 7:08 AM, Sowjanya Komatineni wrote:
This patch implements PMC wakeup sequence for Tegra210
Linux kernel uses the HYPERVISOR_CALLBACK_VECTOR for hypervisor upcall
vector. It is already used for Xen and HyperV.
After the ACRN hypervisor is detected, it will also use this defined
vector to notify the ACRN guest.
Co-developed-by: Jason Chen CJ
Signed-off-by: Jason Chen CJ
Signed-off-by:
Add a special Kconfig symbol X86_HV_CALLBACK_VECTOR so that the guests
using the hypervisor interrupt callback counter can select and thus
enable that counter. Select it when xen or hyperv support is enabled.
No functional changes.
Signed-off-by: Zhao Yakui
Reviewed-by: Borislav Petkov
ACRN is an open-source hypervisor maintained by Linux Foundation.
It is built for embedded IOT with small footprint and real-time features.
Add the ACRN guest support so that it allows linux to be booted under the
ACRN hypervisor. Following this patch it will setup the upcall
notification vector,
ACRN is a flexible, lightweight reference hypervisor, built with real-time
and safety-criticality in mind, optimized to streamline embedded development
through an open source platform. It is built for embedded IOT with small
footprint and real-time features. More details can be found
in
Hi,
On 19. 5. 29. 오전 1:50, Charles Keepax wrote:
> Ensure the case when regmap_update_bits_check fails and the change
> variable is not updated is handled correctly.
>
> Signed-off-by: Charles Keepax
> ---
> drivers/extcon/extcon-arizona.c | 22 +-
> 1 file changed, 13
Hi all,
Changes since 20190528:
New tree: s390-fixes
The akpm-current tree still had its build failure due to an interaction
with the ftrace tree for which I reverted 2 commits.
Non-merge commits (relative to Linus' tree): 2617
2837 files changed, 98532 insertions(+), 49203 deletions
Hi, Leonard
> -Original Message-
> From: Leonard Crestez
> Sent: Wednesday, May 29, 2019 3:24 AM
> To: Anson Huang
> Cc: robh...@kernel.org; mark.rutl...@arm.com; shawn...@kernel.org;
> s.ha...@pengutronix.de; ker...@pengutronix.de; feste...@gmail.com;
> devicet...@vger.kernel.org;
On Tue, 2019-05-28 at 17:23 -0700, David Miller wrote:
> From: Rick Edgecombe
> Date: Mon, 27 May 2019 14:10:56 -0700
>
> > These two patches address issues with the recently added
> > VM_FLUSH_RESET_PERMS vmalloc flag.
> >
> > Patch 1 addresses an issue that could cause a crash after other
> >
On Wed 29-05-19 10:40:33, Hillf Danton wrote:
>
> On Wed, 29 May 2019 00:11:15 +0800 Michal Hocko wrote:
> > On Tue 28-05-19 23:38:11, Hillf Danton wrote:
> > >
> > > In short, I prefer to skip IO mapping since any kind of address range
> > > can be expected from userspace, and it may probably
We have 3 laptops which connect the wifi by the same RTL8723BU.
The PCI VID/PID of the wifi chip is 10EC:B720 which is supported.
They have the same problem with the in-kernel rtl8xxxu driver, the
iperf (as a client to an ethernet-connected server) gets ~1Mbps.
Nevertheless, the signal strength is
On Wed, May 29, 2019 at 02:56:22AM +0300, Vladimir Oltean wrote:
> Not all is rosy, though.
You can sure say that again!
> PTP timestamping will only work when the ports are bridged. Otherwise,
> the metadata follow-up frames holding RX timestamps won't be received
> because they will be
pg_start is copied from userspace on AGPIOC_BIND and AGPIOC_UNBIND ioctl
cmds of agp_ioctl() and passed to agpioc_bind_wrap(). As said in the
comment, (pg_start + mem->page_count) may wrap in case of AGPIOC_BIND,
and it is not checked at all in case of AGPIOC_UNBIND. As a result, user
with
On Wed, May 29, 2019 at 02:56:25AM +0300, Vladimir Oltean wrote:
> The newly introduced function is called on both the RX and TX paths.
NAK on this patch.
> The boolean returned by port_txtstamp should only return false if the
> driver tried to timestamp the skb but failed.
So you say.
>
On Tue, May 28, 2019 at 07:14:22PM -0700, John Stultz wrote:
> Hrm. Is this actually generic? Would it make more sense to have the
> specific implementations with this quirk implement this in their
> read() handler? If not, why?
Strongly agree that this workaround should stay in the driver.
The i2c-ocore driver already has a polling mode interface.But it needs
a workaround for FU540 Chipset on HiFive unleashed board (RevA00).
There is an erratum in FU540 chip that prevents interrupt driven i2c
transfers from working, and also the I2C controller's interrupt bit
cannot be cleared if
The patch is based on mainline v5.2-rc1 and extends DT-bindings for Opencore
based I2C IP block reimplemented
in FU540 SoC, available on HiFive unleashed board (Rev A00), and also provides
a workaround for broken IRQ
which affects the already available I2C polling mode interface in mainline, for
Reformatted compatibility strings to one valid combination on
each line.
Add FU540-C000 specific device tree bindings to already available
i2-ocores file. This device is available on
HiFive Unleashed Rev A00 board. Move interrupt under optional
property list as this can be optional.
The
Update device id table for Opencore's I2C master based re-implementation
used in FU540-c000 chipset on HiFive Unleashed platform.
Device ID's include Sifive, soc-specific device for chip specific tweaks
and sifive IP block specific device for generic programming model.
Signed-off-by: Sagar
The i2c-ocore driver already has a polling mode interface.But it needs
a workaround for FU540 Chipset on HiFive unleashed board (RevA00).
There is an erratum in FU540 chip that prevents interrupt driven i2c
transfers from working, and also the I2C controller's interrupt bit
cannot be cleared if
Will Deacon writes:
> On Tue, May 28, 2019 at 04:01:03PM +0200, Peter Zijlstra wrote:
>> On Tue, May 28, 2019 at 08:31:29PM +0800, Young Xiao wrote:
>> > When a kthread calls call_usermodehelper() the steps are:
>> > 1. allocate current->mm
>> > 2. load_elf_binary()
>> > 3. populate
On Sun, 26 May 2019 19:33:25 +0200 Sebastian Andrzej Siewior
wrote:
> From: Hugh Dickins
>
> Since commit
>
>d9c9ce34ed5c8 ("x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe()
> fails")
Please add this as a
Fixes: d9c9ce34ed5c8 ("x86/fpu: Fault-in user stack if
Hi folks.
I am observed kernel panic after update to git tag 5.2-rc2.
This crash happens at memory pressing when swap being used.
Unfortunately in journalctl saved only this:
May 29 08:02:02 localhost.localdomain kernel: page:e9095823
refcount:1 mapcount:1 mapping:8f3ffeb36949
On Wed, May 29, 2019 at 10:52:56AM +0800, kernel test robot wrote:
> FYI, we noticed the following commit (built with gcc-7):
>
> commit: 079f9927c7bfa026d963db1455197159ebe5b534 ("ext4: gracefully handle
> ext4_break_layouts() failure during truncate")
>
On Tue, May 21, 2019 at 02:05:38AM +, Roman Gushchin wrote:
> On Tue, May 21, 2019 at 11:31:18AM +1000, Tobin C. Harding wrote:
> > On Tue, May 21, 2019 at 12:57:47AM +, Roman Gushchin wrote:
> > > On Mon, May 20, 2019 at 03:40:17PM +1000, Tobin C. Harding wrote:
> > > > In an attempt to
On Mon, May 27, 2019 at 05:01:07PM +0200, Michal Hocko wrote:
> On Fri 24-05-19 10:36:56, ira.we...@intel.com wrote:
> > From: Ira Weiny
> >
> > Device pages can be more than type MEMORY_DEVICE_PUBLIC.
> >
> > Handle all device pages within release_pages()
> >
> > This was found via code
Break out parts of mshyperv.h that are ISA independent into a
separate file in include/asm-generic. This move facilitates
ARM64 code reusing these definitions and avoids code
duplication. No functionality or behavior is changed.
Signed-off-by: Michael Kelley
---
MAINTAINERS
When there is an access phy-hdev in pn544_hci_i2c_irq_thread_fn or
microread_i2c_irq_thread_fn, it is not initialized in pn544_hci_i2c_probe
or microread_i2c_probe.
Therefore, we change the order of calling function xxx_probe and
request_threaded_irq, and add guard of phy->hdev in
Hi, Eduardo
> -Original Message-
> From: Eduardo Valentin
> Sent: Wednesday, May 29, 2019 11:02 AM
> To: Anson Huang
> Cc: robh...@kernel.org; mark.rutl...@arm.com; shawn...@kernel.org;
> s.ha...@pengutronix.de; ker...@pengutronix.de; feste...@gmail.com;
> catalin.mari...@arm.com;
From: Shengjiu Wang
config: x86_64-randconfig-x000201921-201921
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
make ARCH=x86_64
sound/soc/codecs/cs42xx8.c: In function ‘cs42xx8_probe’:
sound/soc/codecs/cs42xx8.c:472:25: error: implicit declaration of function
Hi,
Looks ebpf trace doesn't work during cpu hotplug, see the following trace:
1) trace two functions called during CPU unplug via bcc/trace
/usr/share/bcc/tools/trace -T 'takedown_cpu "%d", arg1' 'take_cpu_down'
2) put cpu7 offline via:
echo 0 > /sys/devices/system/cpu/cpu7/online
3) only
> -Original Message-
> From: Eduardo Valentin
> Sent: 2019年5月29日 10:54
> To: Andy Tang
> Cc: shawn...@kernel.org; Leo Li ;
> robh...@kernel.org; mark.rutl...@arm.com;
> linux-arm-ker...@lists.infradead.org; devicet...@vger.kernel.org;
> linux-kernel@vger.kernel.org;
On Fri, May 24, 2019 at 10:14 PM Steve French wrote:
>
> fixed and repushed to cifs-2.6.git for-next
Thanks!
[resend including mail lists]
>
> On Thu, May 23, 2019 at 11:27 PM Stephen Rothwell
> wrote:
> >
> > Hi all,
> >
> > In commit
> >
> > f875253b5fe6 ("fs/cifs/smb2pdu.c: fix buffer
On 2019/5/28 下午6:56, Stefano Garzarella wrote:
We flush all pending works before to call vdev->config->reset(vdev),
but other works can be queued before the vdev->config->del_vqs(vdev),
so we add another flush after it, to avoid use after free.
Suggested-by: Michael S. Tsirkin
Signed-off-by:
On Mon, 27 May 2019 14:29:58 +0200 Geert Uytterhoeven
wrote:
> There is no need to print an error message and backtrace if
> kmalloc_node() fails, as the memory allocation core already takes care
> of that.
>
> ...
>
> --- a/lib/cpumask.c
> +++ b/lib/cpumask.c
> @@ -114,13 +114,6 @@ bool
On Tuesday, May 28, 2019 at 6:27 PM, Andrew Jeffery wrote:
> On Sun, 26 May 2019, at 00:12, YueHaibing wrote:
> > Fixes gcc '-Wunused-but-set-variable' warning:
> >
> > drivers/edac/aspeed_edac.c: In function aspeed_probe:
> > drivers/edac/aspeed_edac.c:284:22: warning: variable np set but not
>
This adds __GFP_NOWARN to the kmalloc()-portions of the overflow test to
avoid tainting the kernel. Additionally fixes up the math on wrap size
to be architecture and page size agnostic.
Reported-by: Randy Dunlap
Suggested-by: Rasmus Villemoes
Fixes: ca90800a91ba ("test_overflow: Add memory
Hi Miquel,
> > > > > > +static void mxic_nand_select_chip(struct nand_chip *chip, int
> > chipnr)
> > > > >
> > > > > _select_target() is preferred now
> > > >
> > > > Do you mean I implement mxic_nand_select_target() to control #CS ?
> > > >
> > > > If so, I need to call
On Thu, May 23, 2019 at 07:48:56PM -0700, Andrey Smirnov wrote:
> On Mon, Apr 29, 2019 at 9:51 AM Daniel Lezcano
> wrote:
> >
> > On 24/04/2019 01:08, Daniel Lezcano wrote:
> > > On 23/04/2019 17:44, Eduardo Valentin wrote:
> > >> Hello,
> > >>
> > >> On Tue, Apr 16, 2019 at 07:22:03PM +0200,
On Tue, May 28, 2019 at 04:40:06PM -0700, Joe Perches wrote:
> On Tue, 2019-05-28 at 15:51 -0700, Kees Cook wrote:
> > This adds __GFP_NOWARN to the kmalloc()-portions of the overflow test to
> > avoid tainting the kernel. Additionally fixes up the math on wrap size
> > to be architecture and page
On Tue, May 28, 2019 at 02:06:18PM +0800, anson.hu...@nxp.com wrote:
> From: Anson Huang
>
> On some platforms like i.MX8QXP, the thermal driver needs a
> real HW sensor ID from DT thermal zone, the HW sensor ID is
> used to get temperature from SCU firmware, and the virtual
> sensor ID starting
Fix smatch warning:
drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1236
mvpp2_ethtool_cls_rule_ins() warn: unsigned 'info->fs.location' is never less
than zero.
'info->fs.location' is u32 type, never less than zero.
Signed-off-by: YueHaibing
---
v2: rework patch based net-next
---
Linus,
This fixes a memory leak from the error path in the event filter logic.
Please pull the latest trace-v5.2-rc2 tree, which can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace.git
trace-v5.2-rc2
Tag SHA1: 0658b13d1bfd40bda1c2bd1ef3738857e1bf4000
Head
Fixes: 33a90e2f20e6 ("net: hns3: add support for dump firmware statistics by
debugfs")
Signed-off-by: kbuild test robot
---
hclge_debugfs.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c
tree: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
master
head: 602e0f295a91813c9a15938f2a292b9c60a416d9
commit: 33a90e2f20e6c455889a0f41857692221172a5ae [161/171] net: hns3: add
support for dump firmware statistics by debugfs
reproduce:
# apt-get install sparse
On Thu, Apr 25, 2019 at 04:26:40PM +0800, Yuantian Tang wrote:
> The Thermal Monitoring Unit (TMU) monitors and reports the
> temperature from 2 remote temperature measurement sites
> located on ls1028a chip.
> Add TMU dts node to enable this feature.
>
> Signed-off-by: Yuantian Tang
I dont see
YueHaibing,
On Mon, May 27, 2019 at 09:41:24PM +0800, YueHaibing wrote:
> Sensor hw_id is int type other u32, is_sensor_enabled
> should use int to compare, this fix smatch warning:
>
> drivers/thermal/qcom/tsens-common.c:72
> is_sensor_enabled() warn: unsigned 'hw_id' is never less than zero.
On 5/28/19 10:42 PM, Kirill Tkhai wrote:
Hi, Yang,
On 28.05.2019 15:44, Yang Shi wrote:
Currently THP deferred split shrinker is not memcg aware, this may cause
premature OOM with some configuration. For example the below test would
run into premature OOM easily:
$ cgcreate -g memory:thp
$
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.
Signed-off-by: Young Xiao <92siuy...@gmail.com>
---
drivers/pinctrl/bcm/pinctrl-ns2-mux.c | 2 ++
1 file changed, 2 insertions(+)
diff --git
Hi,
Although when detect it is misprediction and drop the execution, but
it can not drop all the effects of speculative execution, like the
cache state. During the speculative execution, the:
rlim = tsk->signal->rlim + resource;// use resource as index
...
*old_rlim = *rlim;
Gustavo,
On Mon, May 27, 2019 at 11:08:25AM -0500, Gustavo A. R. Silva wrote:
> There is no need to compare hw_id with < 0 because such comparison
> of an unsigned value is always false.
>
> Fix this by removing such comparison.
Thanks for fixing this. But we had to revert the commit that
This reverts commit 3e6a8fb3308419129c7a52de6eb42feef5a919a0.
Cc: Andy Gross
Cc: David Brown
Cc: Amit Kucheria
Cc: Zhang Rui
Cc: Daniel Lezcano
Suggested-by: Amit Kucheria
Reported-by: Andy Gross
Signed-off-by: Eduardo Valentin
---
Added this for next -rc, as per request.
On 5/29/19 9:22 AM, David Rientjes wrote:
On Tue, 28 May 2019, Yang Shi wrote:
I got some reports from our internal application team about memcg OOM.
Even though the application has been killed by oom killer, there are
still a lot THPs reside, page reclaim doesn't reclaim them at all.
Some
On Tue, 28 May 2019 11:07:53 -0700 David Miller wrote:
>
> You never even tried to compiled this patch.
>
oops, my bad. I patched the another branch and tested the patch but when I
manually patch net-next tree, I made a mistake. Sorry.
Make use of devm_alloc_etherdev_mqs() to simplify the code.
Signed-off-by: Jisheng Zhang
---
Since V1:
- fix the build error, sorry, my bad.
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +++
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git
The PERF_EVENT_IOC_PERIOD ioctl command can be used to change the
sample period of a running perf_event. Consequently, when calculating
the next event period, the new period will only be considered after the
previous one has overflowed.
This patch changes the calculation of the remaining event
This patch-set is to enable Ethernet controller
(DW Ethernet QoS and DW Ethernet PCS) with SGMII interface in Elkhart Lake.
The DW Ethernet PCS is the Physical Coding Sublayer that is between Ethernet
MAC and PHY and uses MDIO Clause-45 as Communication.
Kweh Hock Leong (1):
net: stmmac: enable
Added EHL SGMII 1Gbps PCI ID. Different MII and speed will have
different PCI ID.
Signed-off-by: Voon Weifeng
---
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 111 +++
1 file changed, 111 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
Hi,
On 5/28/19 7:50 PM, Eric Auger wrote:
Several call sites are about to check whether a device belongs
to the PCI sub-hierarchy of a candidate PCI-PCI bridge.
Introduce an helper to perform that check.
This looks good to me.
Reviewed-by: Lu Baolu
Best regards,
Baolu
Signed-off-by:
From: Ong Boon Leong
xPCS is DWC Ethernet Physical Coding Sublayer that may be integrated
into a GbE controller that uses DWC EQoS MAC controller. An example of
HW configuration is shown below:-
<-GBE Controller-->|<--External PHY chip-->
+--+ ++
From: Ong Boon Leong
We introduce support for driver that has v5.10 IP and is also using
xPCS as MMD. This can be easily enabled for other product that integrates
xPCS that is not using v5.00 IP.
Reviewed-by: Chuah Kim Tatt
Reviewed-by: Voon Weifeng
Reviewed-by: Kweh Hock Leong
Reviewed-by:
From: Ong Boon Leong
With xPCS functions now ready, we add them into the main driver and
ethtool logics. To differentiate from EQoS MAC PCS and DWC Ethernet
xPCS, we introduce 'has_xpcs' in platform data as a mean to indicate
whether GBE controller includes xPCS or not.
To support
From: Kweh Hock Leong
DWMAC4 is capable to support clause 45 mdio communication.
This patch enable the feature on stmmac_mdio_write() and
stmmac_mdio_read() by following phy_write_mmd() and
phy_read_mmd() mdiobus read write implementation format.
Reviewed-by: Li, Yifan
Signed-off-by: Kweh Hock
The bytes_compl and pkts_compl pointers passed to ef4_dequeue_buffers
cannot be NULL. Add a paranoid warning to check this condition and fix
the one case where they were NULL.
Signed-off-by: Young Xiao <92siuy...@gmail.com>
---
drivers/net/ethernet/sfc/falcon/tx.c | 5 -
1 file changed, 4
On Tue, May 28, 2019 at 4:58 PM Vladimir Oltean wrote:
>
> Some PTP hardware offers a 64-bit free-running counter whose snapshots
> are used for timestamping, but only makes part of that snapshot
> available as timestamps (low-order bits).
>
> In that case, timecounter/cyclecounter users must
On 29/05/2019 09:24, Paolo Bonzini wrote:
On 24/05/19 09:56, Tao Xu wrote:
+7.19 KVM_CAP_ENABLE_USR_WAIT_PAUSE
+
+Architectures: x86
+Parameters: args[0] whether feature should be enabled or not
+
+With this capability enabled, a VM can use UMONITOR, UMWAIT and TPAUSE
+instructions. If the
On Fri, 24 May 2019, Andrea Arcangeli wrote:
> > > We are going in circles, *yes* there is a problem for potential swap
> > > storms today because of the poor interaction between memory compaction
> > > and
> > > directed reclaim but this is a result of a poor API that does not allow
> > >
On Sat, 25 May 2019, at 01:39, Eddie James wrote:
>
> On 5/21/19 7:02 AM, Arnd Bergmann wrote:
> > On Mon, May 20, 2019 at 10:19 PM Eddie James wrote:
> >> diff --git a/include/uapi/linux/aspeed-xdma.h
> >> b/include/uapi/linux/aspeed-xdma.h
> >> new file mode 100644
> >> index
Fix a null pointer deference by acpi_driver_data() if device is
null (dereference before check). We should only set cdev and check
this is OK after we are sure device is not null.
Signed-off-by: Young Xiao <92siuy...@gmail.com>
---
drivers/platform/x86/intel_menlow.c | 8 ++--
1 file
In wcd9335_codec_enable_dec(), 'widget_name' is allocated by kstrndup().
However, according to doc: "Note: Use kmemdup_nul() instead if the size
is known exactly." So we should use kmemdup_nul() here instead of
kstrndup().
Signed-off-by: Gen Zhang
---
diff --git a/sound/soc/codecs/wcd9335.c
Thx Valentin,
You are right, Approved.
Best Regards
Guo Ren
On Tue, May 28, 2019 at 11:48:43AM +0100, Valentin Schneider wrote:
> Since the enabling and disabling of IRQs within preempt_schedule_irq()
> is contained in a need_resched() loop, we don't need the outer arch
> code loop.
>
>
Peter Zijlstra writes:
> On Tue, May 28, 2019 at 08:31:29PM +0800, Young Xiao wrote:
>> When a kthread calls call_usermodehelper() the steps are:
>> 1. allocate current->mm
>> 2. load_elf_binary()
>> 3. populate current->thread.regs
>>
>> While doing this, interrupts are not disabled. If
Changes in v4:
retain the reverse xmas tree ordering.
Changes in v3:
1. get hash table size in hw feature reigster, and add support
for taller hash table(128/256) in dwmac4.
2. only clear GMAC_PACKET_FILTER bits used in this function,
to avoid side effect to functions of other bits.
Signed-off-by: Biao Huang
---
drivers/net/ethernet/stmicro/stmmac/common.h
wd719x_chip_init is getting called in interrupt disabled
mode(spin_lock_irqsave) , so we need to GFP_ATOMIC instead
of GFP_KERNEL.
Issue identified by coccicheck
Signed-off-by: Hariprasad Kelam
---
drivers/scsi/wd719x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
From: Mark Brown Sent: Tuesday, May 28, 2019 9:27 PM
> On Tue, May 28, 2019 at 02:20:15AM +, Andy Duan wrote:
>
> > So on i.MX8MM/8QM/8QXP platforms, we catch the issue that user dump
> > regmap registers without power cause system hang.
> > Maybe revert the patch is more reasonable ?
>
>
In drivers/md/dm-init.c, kstrndup() is incorrectly used twice.
It should be: char *kstrndup(const char *s, size_t max, gfp_t gfp);
Signed-off-by: Gen Zhang
---
diff --git a/drivers/md/dm-init.c b/drivers/md/dm-init.c
index 352e803..526e261 100644
--- a/drivers/md/dm-init.c
+++
On Sun, 26 May 2019, at 00:12, YueHaibing wrote:
> Fixes gcc '-Wunused-but-set-variable' warning:
>
> drivers/edac/aspeed_edac.c: In function aspeed_probe:
> drivers/edac/aspeed_edac.c:284:22: warning: variable np set but not
> used [-Wunused-but-set-variable]
>
> It is never used and can be
On Tue, 28 May 2019, Yang Shi wrote:
>
> I got some reports from our internal application team about memcg OOM.
> Even though the application has been killed by oom killer, there are
> still a lot THPs reside, page reclaim doesn't reclaim them at all.
>
> Some investigation shows they are on
zswap compresses swap pages into a dynamically allocated RAM-based
memory pool. The memory pool should be zbud, z3fold or zsmalloc.
All of them will allocate unmovable pages. It will increase the
number of unmovable page blocks that will bad for anti-fragment.
zsmalloc support page migration if
On Mon, 27 May 2019, at 20:58, Alexander Filippov wrote:
> Add a node to describe the video engine and VGA scratch registers on
> AST2400.
>
> These changes were copied from aspeed-g5.dtsi
>
> Signed-off-by: Alexander Filippov
Ugh, I should really sort out the bmc-misc stuff, I don't like
Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.
The problem is that off when initialized from args.off can be
initialized to a negaive value. At which point the "if (off >=
On Fri 08 Feb 09:55 PST 2019, Srinivas Kandagatla wrote:
> APR communication with DSP is not atomic in nature.
> Its request-response type. Trying to pretend that these are atomic
> and invoking apr client callbacks directly under atomic/irq context has
> endless issues with soundcard. It makes
On Wed 01 May 17:14 PDT 2019, Bjorn Andersson wrote:
> The Qualcomm PCIe2 PHY is based on design from Synopsys and found in
> several different platforms where the QMP PHY isn't used.
>
Kishon, any feedback on this or would you be willing to pick it up?
Regards,
Bjorn
> Bjorn Andersson (2):
>
On 2019/5/29 上午12:45, Stefano Garzarella wrote:
On Wed, May 15, 2019 at 10:48:44AM +0800, Jason Wang wrote:
On 2019/5/15 上午12:35, Stefano Garzarella wrote:
On Tue, May 14, 2019 at 11:25:34AM +0800, Jason Wang wrote:
On 2019/5/14 上午1:23, Stefano Garzarella wrote:
On Mon, May 13, 2019 at
On Thu 16 May 02:14 PDT 2019, Stanimir Varbanov wrote:
> Hi Bjorn,
>
> On 5/2/19 3:19 AM, Bjorn Andersson wrote:
> > Before introducing the QCS404 platform, which uses the same PCIe
> > controller as IPQ4019, migrate this to use the bulk clock API, in order
> > to make the error paths slighly
The QCS404 platform contains a PCIe controller of version 2.4.0 and a
Qualcomm PCIe2 PHY. The driver already supports version 2.4.0, for the
IPQ4019, but this support touches clocks and resets related to the PHY
as well, and there's no upstream driver for the PHY.
On QCS404 we must initialize the
The Qualcomm QCS404 platform contains a PCIe controller, add this to the
Qualcomm PCI binding document. The controller is the same version as the
one used in IPQ4019, but the PHY part is described separately, hence the
difference in clocks and resets.
Reviewed-by: Rob Herring
Reviewed-by: Vinod
Before introducing the QCS404 platform, which uses the same PCIe
controller as IPQ4019, migrate this to use the bulk clock API, in order
to make the error paths slighly cleaner.
Acked-by: Stanimir Varbanov
Reviewed-by: Niklas Cassel
Reviewed-by: Vinod Koul
Signed-off-by: Bjorn Andersson
---
This series adds support for the PCIe controller in the Qualcomm QCS404
platform.
Bjorn Andersson (3):
PCI: qcom: Use clk_bulk API for 2.4.0 controllers
dt-bindings: PCI: qcom: Add QCS404 to the binding
PCI: qcom: Add QCS404 PCIe controller support
Yang Shi writes:
> Since commit bd4c82c22c36 ("mm, THP, swap: delay splitting THP after
> swapped out"), THP can be swapped out in a whole. But, nr_reclaimed
> and some other vm counters still get inc'ed by one even though a whole
> THP (512 pages) gets swapped out.
>
> This doesn't make too
From: Huazhong Tan
Date: Tue, 28 May 2019 17:02:50 +0800
> This patch-set includes code optimizations and bugfixes for the HNS3
> ethernet controller driver.
>
> [patch 1/12] fixes a compile warning reported by kbuild test robot.
>
> [patch 2/12] fixes HNS3_RXD_GRO_SIZE_M macro definition
From: Florian Fainelli
Date: Mon, 27 May 2019 19:06:38 -0700
> Both sysfs-bus-mdio and sysfs-class-net-phydev contain the same
> duplication information. There is not currently any MDIO bus specific
> attribute, but there are PHY device (struct phy_device) specific
> attributes. Use the more
From: Xue Chaojing
Date: Mon, 27 May 2019 22:10:05 +
> in set_rx_mode, __dev_mc_sync and netdev_for_each_mc_addr will
> repeatedly set the multicast mac address. so we delete this loop.
>
> Signed-off-by: Xue Chaojing
Applied.
From: Rick Edgecombe
Date: Mon, 27 May 2019 14:10:56 -0700
> These two patches address issues with the recently added
> VM_FLUSH_RESET_PERMS vmalloc flag.
>
> Patch 1 addresses an issue that could cause a crash after other
> architectures besides x86 rely on this path.
>
> Patch 2 addresses an
Em qua, 22 de mai de 2019 06:41, Dan Carpenter
escreveu:
>
> On Tue, May 21, 2019 at 09:46:55PM -0300, Fabio Lima wrote:
> > This patch resolves the following warning from checkpatch.pl
> > WARNING: Missing a blank line after declarations
> >
> > Signed-off-by: Fabio Lima
> > ---
> >
We do still use a maxed out major axis as a signal for a palm in the touchscreen
logic, but I'm not too concerned because if that axis is maxed out, the contact
should probably be treated as a palm anyway...
I'm more concerned with this affecting our gesture detection for
touchpad. It looks
like
From: YueHaibing
Date: Mon, 27 May 2019 21:46:46 +0800
> Fix smatch warning:
>
> drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1236
> mvpp2_ethtool_cls_rule_ins() warn: unsigned 'info->fs.location' is never
> less than zero.
>
> 'info->fs.location' is u32 type, never less than zero.
>
>
1 - 100 of 973 matches
Mail list logo
