as a fallback if sw training fails.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by: Sean Paul <seanp...@chromium.org>
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead s
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by: Rob Herring <r...@kernel.org>
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Exa
as a fallback if sw training fails.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
Reviewed-by: Sean Paul
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if training fail use lower link rate to retry
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang
Reviewed-by: Rob Herring
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Changes in v4:
- None
Changes in v5:
- None
we may use rockchip_phy_typec struct in other driver, so split
it to separate header.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- new patch here
Changes in v7:
- move new e
we may use rockchip_phy_typec struct in other driver, so split
it to separate header.
Signed-off-by: Lin Huang
---
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- new patch here
Changes in v7:
- move new element to next patch
drivers/phy
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
C
From: Chris Zhong <z...@rock-chips.com>
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by
From: Chris Zhong
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
Reviewed-by: Sean Paul
Reviewed-by: Enric Balletbo
---
Changes in v2:
- update patch
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes
some monitors care about the parity bit in the sub-frame of I2S,
but the cdn-dp always set this bit to "1", so these monitors
do not have sound output if use i2s, use spdif can fix this issue.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <
some monitors care about the parity bit in the sub-frame of I2S,
but the cdn-dp always set this bit to "1", so these monitors
do not have sound output if use i2s, use spdif can fix this issue.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
sound/soc/rockchip/rk3399_gru_so
We use jitter bypass mode for spdif, so do not need to set jitter mode
related bit in SPDIF_CTRL_ADDR register. Also, we need to enable
SPDIF_ENABLE bit.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/gpu/drm/rockchip/cdn-d
We use jitter bypass mode for spdif, so do not need to set jitter mode
related bit in SPDIF_CTRL_ADDR register. Also, we need to enable
SPDIF_ENABLE bit.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
drivers/gpu/drm/rockchip/cdn-dp-reg.c | 16 +---
1 file changed, 1
as a fallback if sw training fails.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by: Sean Paul <seanp...@chromium.org>
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead s
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
C
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes
as a fallback if sw training fails.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
Reviewed-by: Sean Paul
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if training fail use lower link rate to retry
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Changes in v4:
- None
Changes in v5:
- None
C
we may use rockchip_phy_typec struct in other driver, so split
it to separate header.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- new patch here
drivers/phy/rockchip/phy-ro
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- change
we may use rockchip_phy_typec struct in other driver, so split
it to separate header.
Signed-off-by: Lin Huang
---
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- new patch here
drivers/phy/rockchip/phy-rockchip-typec.c | 47
From: Chris Zhong <z...@rock-chips.com>
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by
From: Chris Zhong
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
Reviewed-by: Sean Paul
Reviewed-by: Enric Balletbo
---
Changes in v2:
- update patch
as a fallback if sw training fails.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if training fa
as a fallback if sw training fails.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if training fail use lower link rate to retry training
Changes in v4
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Change in v4:
- None
Change in v5:
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
C
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Change in v4:
- None
Change in v5:
- None
.../devicetree/bindings/phy/phy
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes
From: Chris Zhong <z...@rock-chips.com>
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by
From: Chris Zhong
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
Reviewed-by: Sean Paul
Reviewed-by: Enric Balletbo
---
Changes in v2:
- update patch
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
C
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes
From: Chris Zhong <z...@rock-chips.com>
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by
as a fallback if sw training fails.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if training fa
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Change in v4:
- None
.../devicetree/bindings/p
From: Chris Zhong
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
Reviewed-by: Sean Paul
Reviewed-by: Enric Balletbo
---
Changes in v2:
- update patch
as a fallback if sw training fails.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if training fail use lower link rate to retry training
Changes in v4
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang
---
Changes in v2:
- None
Changes in v3:
- modify property description and add this property to Example
Change in v4:
- None
.../devicetree/bindings/phy/phy-rockchip-typec.txt
as a fallback if sw training fails.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if train
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
C
as a fallback if sw training fails.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes in v3:
- use variable fw_training instead sw_training_success
- base on DP SPCE, if training fail use lower link rate to retry training
drivers
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
Changes
From: Chris Zhong <z...@rock-chips.com>
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
Reviewed-by
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- rebase
Changes in v3:
- modify property description and add this property to example
.../devicetree/bindings/phy/phy-rockchip-typ
From: Chris Zhong
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
Reviewed-by: Sean Paul
Reviewed-by: Enric Balletbo
---
Changes in v2:
- update patch
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang
---
Changes in v2:
- rebase
Changes in v3:
- modify property description and add this property to example
.../devicetree/bindings/phy/phy-rockchip-typec.txt | 29
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- rebase
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff
as a fallback if sw training fails.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- update patch following Enric suggest
drivers/gpu/drm/rockchip/Makefile | 3 +-
drivers/gpu/drm/rockchip/c
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang
---
Changes in v2:
- rebase
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation
as a fallback if sw training fails.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
drivers/gpu/drm/rockchip/Makefile | 3 +-
drivers/gpu/drm/rockchip/cdn-dp-core.c | 24 +-
drivers/gpu/drm/rockchip/cdn-dp
From: Chris Zhong <z...@rock-chips.com>
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Change
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
C
From: Chris Zhong
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
drivers/gpu/drm/rockchip/cdn-dp
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
Changes in v2:
- update patch following Enric suggest
drivers
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documen
If want to do training outside DP Firmware, need phy voltage swing
and pre_emphasis value.
Signed-off-by: Lin Huang
---
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/phy/phy
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/
From: Chris Zhong <z...@rock-chips.com>
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
driver
From: Chris Zhong
We may support training outside firmware, so we need support
dpcd read/write to get the message or do some setting with
display.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
drivers/gpu/drm/rockchip/cdn-dp-core.c | 55
drivers/gpu/drm
the phy config values used to fix in dp firmware, but some boards
need change these values to do training and get the better eye diagram
result. So support that in phy driver.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
drivers/phy/rockchip/phy-rockchip-typec.c | 286
.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/gpu/drm/rockchip/Makefile | 3 +-
drivers/gpu/drm/rockchip/cdn-dp-core.c | 23 +-
drivers/gpu/drm/rockchip/cdn-dp-core.h | 2 +
drivers/gpu/drm/roc
.
Signed-off-by: Chris Zhong
Signed-off-by: Lin Huang
---
drivers/gpu/drm/rockchip/Makefile | 3 +-
drivers/gpu/drm/rockchip/cdn-dp-core.c | 23 +-
drivers/gpu/drm/rockchip/cdn-dp-core.h | 2 +
drivers/gpu/drm/rockchip/cdn-dp-link-training.c | 398
From: huang lin <h...@rock-chips.com>
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Change-Id: I8704914898fe53b734d31fbe646df8aa5fd8b30d
Signed-off-by: Lin Huang <h...@
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse
the Innolux P079ZCA panel driver.
Change-Id: I97923aa3735f707332681691b0231c9421b427d0
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- download panel i
From: huang lin
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Change-Id: I8704914898fe53b734d31fbe646df8aa5fd8b30d
Signed-off-by: Lin Huang
---
Changes in v2:
- None
Changes in v3:
-
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse
the Innolux P079ZCA panel driver.
Change-Id: I97923aa3735f707332681691b0231c9421b427d0
Signed-off-by: Lin Huang
---
Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- download panel initial code
drivers/gpu/drm/
From: huang lin <h...@rock-chips.com>
Refactor Innolux P079ZCA panel driver, let it support
multi panel.
Change-Id: If89be5e56dba8cb498e2d50c1bbeb0e8016123a2
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- Change regulator property name to meet the panel datash
From: huang lin
Refactor Innolux P079ZCA panel driver, let it support
multi panel.
Change-Id: If89be5e56dba8cb498e2d50c1bbeb0e8016123a2
Signed-off-by: Lin Huang
---
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
.../devicetree/bindings/display/panel/innolux,p079zca.txt | 11 +--
1 file
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Signed-off-by: Lin Huang
---
.../devicetree/bindings/display/panel/innolux,p079zca.txt | 11 +--
1 file changed, 9 insertions(
Refactor Innolux P079ZCA panel driver, let it support
multi panel.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA panel to support multi panel, support
P097PFG
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse
the Innolux P079ZCA panel driver.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/gpu/drm/panel/Kconfig | 9
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +
Refactor Innolux P079ZCA panel driver, let it support
multi panel.
Signed-off-by: Lin Huang
---
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA panel to support multi panel, support
P097PFG panel in another patch
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse
the Innolux P079ZCA panel driver.
Signed-off-by: Lin Huang
---
drivers/gpu/drm/panel/Kconfig | 9
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +++
2 files change
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse
the Innolux P079ZCA panel driver.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/gpu/drm/panel/Kconfig | 9
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Change-Id: I8704914898fe53b734d31fbe646df8aa5fd8b30d
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
.../devicetree/bindings/di
Refactor Innolux P079ZCA panel driver, let it support
multi panel.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA panel to support multi panel, support
P097PFG
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse
the Innolux P079ZCA panel driver.
Signed-off-by: Lin Huang
---
drivers/gpu/drm/panel/Kconfig | 9
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +++
2 files change
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Change-Id: I8704914898fe53b734d31fbe646df8aa5fd8b30d
Signed-off-by: Lin Huang
---
.../devicetree/bindings/display/panel/innolux,p079zc
Refactor Innolux P079ZCA panel driver, let it support
multi panel.
Signed-off-by: Lin Huang
---
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA panel to support multi panel, support
P097PFG panel in another patch
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel,
it refactor Innolux P079ZCA panel driver, let it support
multi panel, and add support P097PFG panel in this driver.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- change regulator property name to meet the pane
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel,
it refactor Innolux P079ZCA panel driver, let it support
multi panel, and add support P097PFG panel in this driver.
Signed-off-by: Lin Huang
---
Changes in v2:
- change regulator property name to meet the panel datasheet
drivers/gp
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
.../devicetree/bindings/display/panel/innolux,p079zca.txt | 11 +--
1 file
The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.
Signed-off-by: Lin Huang
---
.../devicetree/bindings/display/panel/innolux,p079zca.txt | 11 +--
1 file changed, 9 insertions(
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel,
it refactor Innolux P079ZCA panel driver, let it support
multi panel, and add support P097PFG panel in this driver.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/gpu/drm/panel/panel-innolux-p079
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel,
it refactor Innolux P079ZCA panel driver, let it support
multi panel, and add support P097PFG panel in this driver.
Signed-off-by: Lin Huang
---
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 178 --
1 file ch
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel,
it refactor Innolux P079ZCA panel driver, let it support
multi panel, and add support P097PFG panel in this driver.
Change-Id: If342e58a3de2861219b0b1313f402b6cb41ffa29
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/gp
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel,
it refactor Innolux P079ZCA panel driver, let it support
multi panel, and add support P097PFG panel in this driver.
Change-Id: If342e58a3de2861219b0b1313f402b6cb41ffa29
Signed-off-by: Lin Huang
---
drivers/gpu/drm/panel/panel-in
Document a "reset" and "assert-reset-us", it can be used for
driver control reset property. And reuse post-power-on-delay-ms
for deassert reset delay.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Documentation/devicetree/bindings/input/hid-over-i2c.txt |
Document a "reset" and "assert-reset-us", it can be used for
driver control reset property. And reuse post-power-on-delay-ms
for deassert reset delay.
Signed-off-by: Lin Huang
---
Documentation/devicetree/bindings/input/hid-over-i2c.txt | 4 +++-
1 file changed, 3 inser
some i2c hid devices have reset gpio, need to control
it in the driver.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Changes in v2:
- Add 10us in usleep_range() upper range
- reuse post_power_delay_ms as deassert reset delay
- delete deassert_reset_us property
drivers/hid/i2c-h
some i2c hid devices have reset gpio, need to control
it in the driver.
Signed-off-by: Lin Huang
---
Changes in v2:
- Add 10us in usleep_range() upper range
- reuse post_power_delay_ms as deassert reset delay
- delete deassert_reset_us property
drivers/hid/i2c-hid/i2c-hid.c | 61
some i2c hid devices have reset gpio, need to control
it in the driver.
Change-Id: I87bca954bffc7eb7b35711406f522cb3d0fc2ded
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
drivers/hid/i2c-hid/i2c-hid.c | 63 +++
include/linux/platform_data/i2c
some i2c hid devices have reset gpio, need to control
it in the driver.
Change-Id: I87bca954bffc7eb7b35711406f522cb3d0fc2ded
Signed-off-by: Lin Huang
---
drivers/hid/i2c-hid/i2c-hid.c | 63 +++
include/linux/platform_data/i2c-hid.h | 4 +++
2 files
From: huang lin <h...@rock-chips.com>
on some board use enable pin to control dmic start and stop,
so add this feature in dmic driver.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
sound/soc/codecs/Kconfig | 2 +-
sound/soc/codecs/
From: huang lin
on some board use enable pin to control dmic start and stop,
so add this feature in dmic driver.
Signed-off-by: Lin Huang
---
sound/soc/codecs/Kconfig | 2 +-
sound/soc/codecs/dmic.c | 46 ++
2 files changed, 47 insertions(+), 1
From: huang lin <h...@rock-chips.com>
there may use enable pin to control dmic start and stop,
so add this property in dt-bindings.
Signed-off-by: Lin Huang <h...@rock-chips.com>
---
Documentation/devicetree/bindings/sound/dmic.txt | 4
1 file changed, 4 insertions(+)
From: huang lin
there may use enable pin to control dmic start and stop,
so add this property in dt-bindings.
Signed-off-by: Lin Huang
---
Documentation/devicetree/bindings/sound/dmic.txt | 4
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/dmic.txt
1 - 100 of 320 matches
Mail list logo
