In _scsih_probe, delay the call to scsi_add_host until the host has been
fully set up.
Otherwise, the default .can_queue value of 1 causes scsi-mq to set the block
layer request queue size to its minimum size, resulting in awful performance.
In _scsih_probe error handling, call
In _scsih_probe, delay the call to scsi_add_host until the host has been
fully set up.
Otherwise, the default .can_queue value of 1 causes scsi-mq to set the block
layer request queue size to its minimum size, resulting in awful performance.
In _scsih_probe error handling, call
In _scsih_probe, delay the call to scsi_add_host until the host has been
fully set up.
Otherwise, the default .can_queue value of 1 causes scsi-mq to set the block
layer request queue size to its minimum size, resulting in awful performance.
In _scsih_probe error handling, call
In _scsih_probe, delay the call to scsi_add_host until the host has been
fully set up.
Otherwise, the default .can_queue value of 1 causes scsi-mq to set the block
layer request queue size to its minimum size, resulting in awful performance.
In _scsih_probe error handling, call
Added code to send a SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends the
Below is the change set in MPI2 Rev Y specification and in 2.00.17 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
Below is the change set in MPI2 Rev Z specification and in 2.00.19 header files
1) Added
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/Kconfig |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.c |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.h |2 +-
drivers/scsi/mpt2sas/mpt2sas_config.c|
Bump mpt3sas driver version to 04.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 8fb2a38..09545fc
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
Added following branding Strings for Intel custom HBAs support.
Driver String: Vendor ID Device ID
SubSystemVendor ID SubSystemDevice ID
Intel(R) Integrated RAID Module RMS3JC080 0x1000 0x0097
0x8086
Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files
1) Added reserved fields to IO Unit Page 7 for future use.
2) Added optional functionality to IOCInit Request so that
the host may specify a separate base address for each
Reply Descriptor Post Queue. IOC support
Bump mpt3sas driver version to 03.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 3007521..0f7add9
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/Kconfig|2 +-
drivers/scsi/mpt3sas/mpi/mpi2.h |2 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h|2 +-
drivers/scsi/mpt3sas/mpi/mpi2_init.h
Added code to send an SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends an
Just resending below set of patches which I have sent on 14th March 2014.
And I have removed below subjected patch since we have already have the
module parameter port_mask to disable EEDP support.
[PATCH 1/9][SCSI]mpt3sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
Below is the change set in MPI2.5 Rev G specification and 2.00.31 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
3) Added Allow Protection Information bit for IR Volume Create.
Signed-off-by: Sreekanth
Bump mpt2sas driver version to 18.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 6dbbaba..cc49cbf
During hot-plugging of a disk(having a flaky link) the disk addition
stops and any further disk addition or removal doesn't happen on that
controller.
This is because, when driver receives DELAY_NOT_RESPONDING for a disk when it
is undergoing
addition in the SCSI Mid layer, the driver would
The driver would send IOC facts only if HBA is in operational or ready
state. If it is in fault state, a diagnostic reset would be issued. It
would wait for 10 seconds to exit out of reset state. If the HBA continues
to be in reset state, then the HBA wouldn't be claimed by the driver.
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
There was a down casting of the volume max LBA from a U64 to a U32,
which is taken out and now the max LBA is set appropriately to U64.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 14 ++
1 files changed, 10 insertions(+), 4 deletions(-)
diff --git
Bump mpt2sas driver version to 17.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 80d26c1..0a6747a
Added driver module parameter max_msix_vectors. Using this
module parameter the maximum number of MSI-X vectors could be set.
The number of MSI-X vectors used would be the minimum of MSI-X vectors
supported by the HBA, the number of CPU cores and the value set to
max_msix_vectors module
Just resending below set of patches which I have sent on 14th March 2014.
And I have removed below subjected patch since we have already have the
module parameter port_mask to disable EEDP support.
[PATCH 02/11][SCSI]mpt2sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
Just resending below set of patches which I have sent on 14th March 2014.
And I have removed below subjected patch since we have already have the
module parameter port_mask to disable EEDP support.
[PATCH 02/11][SCSI]mpt2sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
Added driver module parameter max_msix_vectors. Using this
module parameter the maximum number of MSI-X vectors could be set.
The number of MSI-X vectors used would be the minimum of MSI-X vectors
supported by the HBA, the number of CPU cores and the value set to
max_msix_vectors module
Bump mpt2sas driver version to 17.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@avagotech.com
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
There was a down casting of the volume max LBA from a U64 to a U32,
which is taken out and now the max LBA is set appropriately to U64.
Signed-off-by: Sreekanth Reddy sreekanth.re...@avagotech.com
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 14 ++
1 files changed, 10 insertions(+),
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
The driver would send IOC facts only if HBA is in operational or ready
state. If it is in fault state, a diagnostic reset would be issued. It
would wait for 10 seconds to exit out of reset state. If the HBA continues
to be in reset state, then the HBA wouldn't be claimed by the driver.
During hot-plugging of a disk(having a flaky link) the disk addition
stops and any further disk addition or removal doesn't happen on that
controller.
This is because, when driver receives DELAY_NOT_RESPONDING for a disk when it
is undergoing
addition in the SCSI Mid layer, the driver would
Bump mpt2sas driver version to 18.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@avagotech.com
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
Below is the change set in MPI2.5 Rev G specification and 2.00.31 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
3) Added Allow Protection Information bit for IR Volume Create.
Signed-off-by: Sreekanth
Just resending below set of patches which I have sent on 14th March 2014.
And I have removed below subjected patch since we have already have the
module parameter port_mask to disable EEDP support.
[PATCH 1/9][SCSI]mpt3sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
Added code to send an SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends an
Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files
1) Added reserved fields to IO Unit Page 7 for future use.
2) Added optional functionality to IOCInit Request so that
the host may specify a separate base address for each
Reply Descriptor Post Queue. IOC support
Bump mpt3sas driver version to 03.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@avagotech.com
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy sreekanth.re...@avagotech.com
---
drivers/scsi/mpt3sas/Kconfig|2 +-
drivers/scsi/mpt3sas/mpi/mpi2.h |2 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h|2 +-
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
Added following branding Strings for Intel custom HBAs support.
Driver String: Vendor ID Device ID
SubSystemVendor ID SubSystemDevice ID
Intel(R) Integrated RAID Module RMS3JC080 0x1000 0x0097
0x8086
Bump mpt3sas driver version to 04.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@avagotech.com
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
Below is the change set in MPI2 Rev Y specification and in 2.00.17 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
Below is the change set in MPI2 Rev Z specification and in 2.00.19 header files
1) Added
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy sreekanth.re...@avagotech.com
---
drivers/scsi/mpt2sas/Kconfig |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.c |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.h |2 +-
Added code to send a SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends the
>>
>> Sreekanth> A new mpt2sas driver module parameter 'disable_eedp' is
>> Sreekanth> added to Disable EEDP support. By default DIF support is
>> Sreekanth> enabled in the driver and this module parameter would allow
>> Sreekanth> users to turn it off.
>>
>> Why don't you just set the prot_mask
Sreekanth A new mpt2sas driver module parameter 'disable_eedp' is
Sreekanth added to Disable EEDP support. By default DIF support is
Sreekanth enabled in the driver and this module parameter would allow
Sreekanth users to turn it off.
Why don't you just set the prot_mask module parameter to
Bump mpt3sas driver version to 04.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 8fb2a38..09545fc
Added following branding Strings for Intel custom HBAs support.
Driver String: Vendor ID Device ID
SubSystemVendor ID SubSystemDevice ID
Intel(R) Integrated RAID Module RMS3JC080 0x1000 0x0097
0x8086
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/Kconfig|2 +-
drivers/scsi/mpt3sas/mpi/mpi2.h |2 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h|2 +-
drivers/scsi/mpt3sas/mpi/mpi2_init.h
Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files
1) Added reserved fields to IO Unit Page 7 for future use.
2) Added optional functionality to IOCInit Request so that
the host may specify a separate base address for each
Reply Descriptor Post Queue. IOC support
Bump mpt3sas driver version to 03.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 3007521..0f7add9
Below is the change set in MPI2.5 Rev G specification and 2.00.31 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
3) Added Allow Protection Information bit for IR Volume Create.
Signed-off-by: Sreekanth
Added code to send an SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends an
A new mpt3sas driver module parameter 'disable_eedp' is added to Disable
EEDP support. By default DIF support is enabled in the driver and
this module parameter would allow users to turn it off.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 38
Please consider this patch set for next kernel release.
Signed-off-by: Sreekanth Reddy
---
[PATCH 1/9][SCSI]mpt3sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
[PATCH 2/9][SCSI]mpt3sas: MPI2.5 Rev G (2.5.2) specifications.
[PATCH 3/9][SCSI]mpt3sas: Clear PFA Status
Bump mpt2sas driver version to 17.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 80d26c1..0a6747a
Bump mpt2sas driver version to 18.100.00.00.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 6dbbaba..cc49cbf
During hot-plugging of a disk(having a flaky link) the disk addition
stops and any further disk addition or removal doesn't happen on that
controller.
This is because, when driver receives DELAY_NOT_RESPONDING for a disk when it
is undergoing
addition in the SCSI Mid layer, the driver would
Below is the change set in MPI2 Rev Y specification and in 2.00.17 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
Below is the change set in MPI2 Rev Z specification and in 2.00.19 header files
1) Added
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/Kconfig |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.c |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.h |2 +-
drivers/scsi/mpt2sas/mpt2sas_config.c|
The driver would send IOC facts only if HBA is in operational or ready
state. If it is in fault state, a diagnostic reset would be issued. It
would wait for 10 seconds to exit out of reset state. If the HBA continues
to be in reset state, then the HBA wouldn't be claimed by the driver.
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
There was a down casting of the volume max LBA from a U64 to a U32,
which is taken out and now the max LBA is set appropriately to U64.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 14 ++
1 files changed, 10 insertions(+), 4 deletions(-)
diff --git
Added code to send a SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends the
Added driver module parameter max_msix_vectors. Using this
module parameter the maximum number of MSI-X vectors could be set.
The number of MSI-X vectors used would be the minimum of MSI-X vectors
supported by the HBA, the number of CPU cores and the value set to
max_msix_vectors module
A new mpt2sas driver module parameter 'disable_eedp' is added to Disable
EEDP support. By default DIF support is enabled in the driver and
this module parameter would allow users to turn it off.
Signed-off-by: Sreekanth Reddy
---
drivers/scsi/mpt2sas/mpt2sas_base.c |9 --
Please consider this patch set for next kernel release.
Signed-off-by: Sreekanth Reddy
---
[PATCH 01/11][SCSI]mpt2sas: Added driver module parameter max_msix_vectors.
[PATCH 02/11][SCSI]mpt2sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
[PATCH
Please consider this patch set for next kernel release.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
[PATCH 01/11][SCSI]mpt2sas: Added driver module parameter max_msix_vectors.
[PATCH 02/11][SCSI]mpt2sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
A new mpt2sas driver module parameter 'disable_eedp' is added to Disable
EEDP support. By default DIF support is enabled in the driver and
this module parameter would allow users to turn it off.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt2sas/mpt2sas_base.c |
Added driver module parameter max_msix_vectors. Using this
module parameter the maximum number of MSI-X vectors could be set.
The number of MSI-X vectors used would be the minimum of MSI-X vectors
supported by the HBA, the number of CPU cores and the value set to
max_msix_vectors module
Added code to send a SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends the
There was a down casting of the volume max LBA from a U64 to a U32,
which is taken out and now the max LBA is set appropriately to U64.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt2sas/mpt2sas_scsih.c | 14 ++
1 files changed, 10 insertions(+), 4
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
The driver would send IOC facts only if HBA is in operational or ready
state. If it is in fault state, a diagnostic reset would be issued. It
would wait for 10 seconds to exit out of reset state. If the HBA continues
to be in reset state, then the HBA wouldn't be claimed by the driver.
During hot-plugging of a disk(having a flaky link) the disk addition
stops and any further disk addition or removal doesn't happen on that
controller.
This is because, when driver receives DELAY_NOT_RESPONDING for a disk when it
is undergoing
addition in the SCSI Mid layer, the driver would
Bump mpt2sas driver version to 17.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
index
Below is the change set in MPI2 Rev Y specification and in 2.00.17 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
Below is the change set in MPI2 Rev Z specification and in 2.00.19 header files
1) Added
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt2sas/Kconfig |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.c |2 +-
drivers/scsi/mpt2sas/mpt2sas_base.h |2 +-
Bump mpt2sas driver version to 18.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt2sas/mpt2sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h
b/drivers/scsi/mpt2sas/mpt2sas_base.h
index
Please consider this patch set for next kernel release.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
[PATCH 1/9][SCSI]mpt3sas: Added new driver module Parameter disable_eedp to
Disable EEDP Support.
[PATCH 2/9][SCSI]mpt3sas: MPI2.5 Rev G (2.5.2) specifications.
[PATCH
A new mpt3sas driver module parameter 'disable_eedp' is added to Disable
EEDP support. By default DIF support is enabled in the driver and
this module parameter would allow users to turn it off.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt3sas/mpt3sas_base.c |
Below is the change set in MPI2.5 Rev G specification and 2.00.31 header files
1) Added SCSIStatusQualifier to SCSI IO Error Reply message.
2) Added ATA Security Freeze Lock to IO Unit Page 1 Flags field.
3) Added Allow Protection Information bit for IR Volume Create.
Signed-off-by: Sreekanth
Added code to send an SEP message that turns off the Predictive
Failure LED when a drive is removed (if Predictive Failure LED was turned on).
Added a new flag 'pfa_led_on' per device that tracks the status of Predictive
Failure LED. When the drive is removed, this flag is checked and
sends an
Bump mpt3sas driver version to 03.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index
Below is the change set in MPI2.5 Rev H specification and 2.00.32 header files
1) Added reserved fields to IO Unit Page 7 for future use.
2) Added optional functionality to IOCInit Request so that
the host may specify a separate base address for each
Reply Descriptor Post Queue. IOC support
Copyright in driver sources is updated for year the 2014.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt3sas/Kconfig|2 +-
drivers/scsi/mpt3sas/mpi/mpi2.h |2 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h|2 +-
Added following branding Strings for Intel custom HBAs support.
Driver String: Vendor ID Device ID
SubSystemVendor ID SubSystemDevice ID
Intel(R) Integrated RAID Module RMS3JC080 0x1000 0x0097
0x8086
Up to now, Driver allocates a single contiguous block of memory
pool for all reply queues and passes down a single address in the
ReplyDescriptorPostQueueAddress field of the IOC Init Request
Message to the firmware.
When firmware receives this address, it will program each of the
Reply
Bump mpt3sas driver version to 04.100.00.00.
Signed-off-by: Sreekanth Reddy sreekanth.re...@lsi.com
---
drivers/scsi/mpt3sas/mpt3sas_base.h |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h
b/drivers/scsi/mpt3sas/mpt3sas_base.h
index
;Cc: Jan Vesely; Nandigama, Nagalakshmi; Reddy, Sreekanth; Tomas Henzl
>Subject: [PATCH 0/2] mpt{2,3}sas remove disconnected phys on topology
>change
>
>From: Jan Vesely
>
>These two patches add phy removal on link loss. This change keeps sysfs up-
>to-date with actually connected phys.
, Nagalakshmi; Reddy, Sreekanth; Tomas Henzl
Subject: [PATCH 0/2] mpt{2,3}sas remove disconnected phys on topology
change
From: Jan Vesely jves...@redhat.com
These two patches add phy removal on link loss. This change keeps sysfs up-
to-date with actually connected phys. Without these patches
able 'event_data' warning".
Thanks,
Sreekanth
> -Original Message-
> From: linux-scsi-ow...@vger.kernel.org [mailto:linux-scsi-
> ow...@vger.kernel.org] On Behalf Of Tim Gardner
> Sent: Thursday, February 21, 2013 12:18 AM
> To: linux-kernel@vger.kernel.org
> Cc: Tim G
,
Sreekanth
-Original Message-
From: linux-scsi-ow...@vger.kernel.org [mailto:linux-scsi-
ow...@vger.kernel.org] On Behalf Of Tim Gardner
Sent: Thursday, February 21, 2013 12:18 AM
To: linux-kernel@vger.kernel.org
Cc: Tim Gardner; Nandigama, Nagalakshmi; Reddy, Sreekanth; Support
James,
This patch seem to be fine. Please consider this patch as Acked-by: "Sreekanth
Reddy"
Regards,
Sreekanth.
-Original Message-
From: Dan Carpenter [mailto:dan.carpen...@oracle.com]
Sent: Friday, December 07, 2012 11:58 AM
To: Nandigama, Nagalakshmi
Cc: Reddy, Sreekant
James,
This patch seem to be fine. Please consider this patch as Acked-by: Sreekanth
Reddy sreekanth.re...@lsi.com
Regards,
Sreekanth.
-Original Message-
From: Dan Carpenter [mailto:dan.carpen...@oracle.com]
Sent: Friday, December 07, 2012 11:58 AM
To: Nandigama, Nagalakshmi
Cc: Reddy
Hi,
This patch seem to be fine. Please consider this patch as Acked-by: "Sreekanth
Reddy"
Regards,
Sreekanth.
-Original Message-
From: linux-scsi-ow...@vger.kernel.org
[mailto:linux-scsi-ow...@vger.kernel.org] On Behalf Of Kent Overstreet
Sent: Tuesday, October 16, 2012 1:39 AM
To:
This patch seem to be fine. Please consider this patch.
Regards,
Sreekanth.
-Original Message-
From: linux-scsi-ow...@vger.kernel.org
[mailto:linux-scsi-ow...@vger.kernel.org] On Behalf Of Kent Overstreet
Sent: Tuesday, October 16, 2012 1:39 AM
To: linux-bca...@vger.kernel.org;
This patch seem to be fine. Please consider this patch.
Regards,
Sreekanth.
-Original Message-
From: linux-scsi-ow...@vger.kernel.org
[mailto:linux-scsi-ow...@vger.kernel.org] On Behalf Of Kent Overstreet
Sent: Tuesday, October 16, 2012 1:39 AM
To: linux-bca...@vger.kernel.org;
Hi,
This patch seem to be fine. Please consider this patch as Acked-by: Sreekanth
Reddy sreekanth.re...@lsi.com
Regards,
Sreekanth.
-Original Message-
From: linux-scsi-ow...@vger.kernel.org
[mailto:linux-scsi-ow...@vger.kernel.org] On Behalf Of Kent Overstreet
Sent: Tuesday, October
1 - 100 of 102 matches
Mail list logo
