Hello Marco,
Am Montag, den 08.03.2021, 09:40 +0100 schrieb Marco Felsch:
> On 21-03-08 07:40, Heiko Schocher wrote:
> > enable the mt25qu256aba spi nor on the imx8mp-phycore-som.
> >
> > Signed-off-by: Heiko Schocher
> > ---
> >
> > .../dts/freescale/imx8mp-phycore-som.dtsi | 27
> >
Hello Heiko,
first thanks for the patch :).
Am Montag, den 08.03.2021, 07:40 +0100 schrieb Heiko Schocher:
> enable the mt25qu256aba spi nor on the imx8mp-phycore-som.
>
> Signed-off-by: Heiko Schocher
> ---
>
> .../dts/freescale/imx8mp-phycore-som.dtsi | 27
> +++
> 1
Hello Andreas,
Am Dienstag, den 09.07.2019, 20:32 +0200 schrieb Andreas Klinger:
> mmc cards on mmc1 are not detected because of wrong card detect (cd)
> level.
>
> Change cd from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW.
>
> This is necessary because of commit e63201f19438 ("mmc: omap_hsmmc:
>
In function tilcdc_get_external_components the check for
the remote port parent is not correct. We need a '||' instead of
an '&&'.
Signed-off-by: Teresa Remmet <t.rem...@phytec.de>
---
There has been send out a different version of this patch about a year ago.
But there was no f
In function tilcdc_get_external_components the check for
the remote port parent is not correct. We need a '||' instead of
an '&&'.
Signed-off-by: Teresa Remmet
---
There has been send out a different version of this patch about a year ago.
But there was no feedback at all. Please a
Hello,
Am Donnerstag, den 14.07.2016, 11:53 +0200 schrieb Arnd Bergmann:
> A bug fix just introduced incorrect behavior in the omap2 nand driver, as
> found by gcc-6.1:
>
> drivers/mtd/nand/omap2.c: In function 'omap_get_dt_info':
> drivers/mtd/nand/omap2.c:1658:2: error: this 'if' clause does
Hello,
Am Donnerstag, den 14.07.2016, 11:53 +0200 schrieb Arnd Bergmann:
> A bug fix just introduced incorrect behavior in the omap2 nand driver, as
> found by gcc-6.1:
>
> drivers/mtd/nand/omap2.c: In function 'omap_get_dt_info':
> drivers/mtd/nand/omap2.c:1658:2: error: this 'if' clause does
Hello Andrew,
Am Mittwoch, den 20.01.2016, 15:21 +0100 schrieb Andrew Lunn:
> On Wed, Jan 20, 2016 at 01:40:35PM +0100, Teresa Remmet wrote:
> > When the lan87xx_read_status function is getting called the
> > energy detect mode is enabled again even if it has been
> > di
Hello Andrew,
Am Mittwoch, den 20.01.2016, 15:21 +0100 schrieb Andrew Lunn:
> On Wed, Jan 20, 2016 at 01:40:35PM +0100, Teresa Remmet wrote:
> > When the lan87xx_read_status function is getting called the
> > energy detect mode is enabled again even if it has been
> > di
Cleaned up the regulators on the wega board. Created a simple bus,
renamed the regulators according to the schematics and added missing
regulator on wega.
Signed-off-by: Teresa Remmet
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 36 ---
arch/arm/boot/dts/am335x
Fix the mpu voltage as it is set to low for the silicon
revision 2.1.
Signed-off-by: Teresa Remmet
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi
b/arch/arm/boot/dts/am335x-phycore
Cleaned up the regulators on the wega board. Created a simple bus,
renamed the regulators according to the schematics and added missing
regulator on wega.
Signed-off-by: Teresa Remmet <t.rem...@phytec.de>
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 36 ---
Fix the mpu voltage as it is set to low for the silicon
revision 2.1.
Signed-off-by: Teresa Remmet <t.rem...@phytec.de>
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi
b/arch/ar
Hello Matthias,
Am Freitag, den 07.08.2015, 11:09 +0200 schrieb Matthias Klein:
> Partitions which are defined in the som file can not be deleted in the
> board file.
>
> Signed-off-by: Matthias Klein
> ---
> arch/arm/boot/dts/am335x-phycore-som.dtsi | 37 -
>
Hello Matthias,
Am Freitag, den 07.08.2015, 11:09 +0200 schrieb Matthias Klein:
Partitions which are defined in the som file can not be deleted in the
board file.
Signed-off-by: Matthias Klein matthias.kl...@optimeas.de
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 37
Hello Igor,
Am Dienstag, den 28.07.2015, 11:29 +0300 schrieb Igor Grinberg:
> Hi Matt,
>
> On 07/27/15 17:34, Matt Porter wrote:
> > On Thu, Jul 16, 2015 at 10:30:48AM +0200, Teresa Remmet wrote:
> >> phyCORE-AM335x is a SoM (System on Module) containing
> >
Hello Igor,
Am Dienstag, den 28.07.2015, 11:29 +0300 schrieb Igor Grinberg:
Hi Matt,
On 07/27/15 17:34, Matt Porter wrote:
On Thu, Jul 16, 2015 at 10:30:48AM +0200, Teresa Remmet wrote:
phyCORE-AM335x is a SoM (System on Module) containing
a AM335x SOC. The module can be connected
populated.
* RAM up to 1GiB
* PMIC
* NAND flash up to 1GiB
* Eth PHY on SOM: 1x RMII
* SPI NOR flash 8MiB (optional)
* i2c RTC (optional)
* i2c EEPROM 4kiB (optional)
Signed-off-by: Teresa Remmet
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 368 ++
1 file changed, 368
board features:
* ETH phy on carrier board: 1x MII
* 1x CAN
* 2x UART
* USB0 (device)
* USB1 (host)
* mSD slot
Signed-off-by: Teresa Remmet
---
.../devicetree/bindings/arm/omap/omap.txt | 3 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/am335x-wega
board features:
* ETH phy on carrier board: 1x MII
* 1x CAN
* 2x UART
* USB0 (device)
* USB1 (host)
* mSD slot
Signed-off-by: Teresa Remmet t.rem...@phytec.de
---
.../devicetree/bindings/arm/omap/omap.txt | 3 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts
populated.
* RAM up to 1GiB
* PMIC
* NAND flash up to 1GiB
* Eth PHY on SOM: 1x RMII
* SPI NOR flash 8MiB (optional)
* i2c RTC (optional)
* i2c EEPROM 4kiB (optional)
Signed-off-by: Teresa Remmet t.rem...@phytec.de
---
arch/arm/boot/dts/am335x-phycore-som.dtsi | 368 ++
1
21 matches
Mail list logo