On 3/3/2018 1:12 PM, Guenter Roeck wrote:
> On 03/03/2018 12:48 PM, Guenter Roeck wrote:
>> On 03/03/2018 11:07 AM, Troy Kisky wrote:
>>> On 3/3/2018 8:32 AM, Guenter Roeck wrote:
>>>> Hi,
>>>>
>>>> since v4.15, I get the following runtime wa
On 3/3/2018 8:32 AM, Guenter Roeck wrote:
> Hi,
>
> since v4.15, I get the following runtime warning when running sabrelite images
> in qemu.
>
> irq 65: nobody cared (try booting with the "irqpoll" option)
> ...
> handlers:
> [<26292474>] fec_pps_interrupt
> Disabling IRQ #65
> fec 2188000.ether
On 1/3/2018 12:32 PM, Kieran Bingham wrote:
> From: Kieran Bingham
>
> The Linux UVC driver has long provided adequate performance capabilities for
> web-cams and low data rate video devices in Linux while resolutions were low.
>
> Modern USB cameras are now capable of high data rates thanks to
On 3/9/2017 8:52 PM, Steve Longerbeam wrote:
> There is a pin conflict with GPIO_6. This pin functions as a power
> input pin to the OV5642 camera sensor, but ENET uses it as the h/w
> workaround for erratum ERR006687, to wake-up the ARM cores on normal
> RX and TX packet done events. So we need to
rl-names = "default";
> pinctrl-0 = <&pinctrl_wlan_vmmc>;
> regulator-name = "reg_wlan_vmmc";
> @@ -515,6 +527,12 @@
> >;
> };
>
> +
On 8/7/2014 7:38 AM, Fabio Estevam wrote:
> On Thu, Aug 7, 2014 at 11:20 AM, Fabio Estevam wrote:
>
> ,but I am wondering if we should also do:
>
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -66,6 +66,7 @@
> pinctrl-0 = <&pinctrl_
On 1/30/2013 3:37 PM, Anson Huang wrote:
some of anatop's regulators(vppcpu, vddpu and vddsoc) have
register settings about LDO's step time, which will impact
the LDO ramp up speed, need to use set_voltage_time_sel
interface to add necessary delay everytime LDOs' voltage
is increased.
offset 0x1
7 matches
Mail list logo