, < 19>;
+ mbox-names = "ipc-1", "ipc-2", "ipc-3";
But also here the name with 'ipc-N' is probably not particularly
fitting?
Please let me know your thoughts and any suggestions.
Signed-off-by: Luca Weiss
---
Changes in v2:
- Mark qcom,ipc-N as dep
Signed-off-by: Luca Weiss
---
drivers/soc/qcom/smsm.c | 51 -
1 file changed, 50 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
index e7c7e9a640a6..ffe78ae34386 100644
--- a/drivers/soc/qcom/smsm.c
+++ b
to
the mboxes property by index, starting at 0 since that's a valid SMSM
host also.
Mark the older qcom,ipc-N as deprecated and update the example with
mboxes.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/soc/qcom/qcom,smsm.yaml| 30 +++---
1 file changed, 21 insertions
_err_probe to handle EPROBE_DEFER nicely. And add one for ipc_regmap
also to be complete.
With this done, we can remove the outer print completely.
Signed-off-by: Luca Weiss
---
Changes in v2:
- Rebase on qcom for-next, drop dts patches which have been applied
- Improve error printing situat
Specify the file name for the squashed/non-split firmware with the .mbn
extension instead of the split .mdt. The kernel can load both but the
squashed version is preferred in dts nowadays.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 2 +-
1 file changed, 1
On Fri Apr 12, 2024 at 4:19 PM CEST, Luca Weiss wrote:
> Some SC7280-based boards crash when providing the "secure_non_pixel"
> context bank, so allow only one iommu in the bindings also.
Hi all,
This patch is still pending and not having it causes dt validation
warnings for
the phone with at least some amount of power.
Reviewed-by: Konrad Dybcio
Signed-off-by: Luca Weiss
---
.../dts/qcom/sm6350-sony-xperia-lena-pdx213.dts| 1 +
arch/arm64/boot/dts/qcom/sm6350.dtsi | 50 +++
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 58
Kozlowski
To: Conor Dooley
Cc: ~postmarketos/upstream...@lists.sr.ht
Cc: phone-de...@vger.kernel.org
Cc: linux-arm-...@vger.kernel.org
Cc: devicet...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luca Weiss
Changes in v3:
- Disable pm7250b typec node by default since on some
Type-C port management functionality lives inside of the PMIC block on
pm7250b.
The Type-C port management logic controls orientation detection,
vbus/vconn sense and to send/receive Type-C Power Domain messages.
Reviewed-by: Bryan O'Donoghue
Reviewed-by: Konrad Dybcio
Signed-off-by: Luca Weiss
Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.
Reviewed-by: Bryan O'Donoghue
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++
1 file changed, 6 insertions
On Samstag, 25. Mai 2024 18:47:08 MESZ Krzysztof Kozlowski wrote:
> On 24/05/2024 19:55, Luca Weiss wrote:
> > On Donnerstag, 23. Mai 2024 08:19:11 MESZ Krzysztof Kozlowski wrote:
> >> On 23/05/2024 08:16, Luca Weiss wrote:
> >>> On Donnerstag, 23. Mai 2024 08:02:13
On Tue May 28, 2024 at 11:35 PM CEST, Bjorn Andersson wrote:
> On Fri, May 10, 2024 at 02:27:09PM GMT, Luca Weiss wrote:
> > Add the required nodes for sound playback via a connected external
> > display (DisplayPort over USB-C).
> >
> > Signed-off-by: Luca Weiss
>
On Donnerstag, 23. Mai 2024 08:19:11 MESZ Krzysztof Kozlowski wrote:
> On 23/05/2024 08:16, Luca Weiss wrote:
> > On Donnerstag, 23. Mai 2024 08:02:13 MESZ Krzysztof Kozlowski wrote:
> >> On 22/05/2024 19:34, Luca Weiss wrote:
> >>> On Mittwoch, 22. Mai 2024 08:49:43
On Donnerstag, 23. Mai 2024 08:02:13 MESZ Krzysztof Kozlowski wrote:
> On 22/05/2024 19:34, Luca Weiss wrote:
> > On Mittwoch, 22. Mai 2024 08:49:43 MESZ Krzysztof Kozlowski wrote:
> >> On 21/05/2024 22:35, Luca Weiss wrote:
> >>> On Dienstag, 21. Mai 2024 10:58:07
On Mittwoch, 22. Mai 2024 08:49:43 MESZ Krzysztof Kozlowski wrote:
> On 21/05/2024 22:35, Luca Weiss wrote:
> > On Dienstag, 21. Mai 2024 10:58:07 MESZ Krzysztof Kozlowski wrote:
> >> On 20/05/2024 17:11, Luca Weiss wrote:
> >>> Hi Krzysztof
> >>>
>
On Dienstag, 21. Mai 2024 10:58:07 MESZ Krzysztof Kozlowski wrote:
> On 20/05/2024 17:11, Luca Weiss wrote:
> > Hi Krzysztof
> >
> > Ack, sounds good.
> >
> > Maybe also from you, any opinion between these two binding styles?
> >
> > So first u
On Montag, 20. Mai 2024 08:46:39 MESZ Krzysztof Kozlowski wrote:
> On 15/05/2024 17:06, Luca Weiss wrote:
> > Hi Rob,
> >
> > Any feedback on the below topic?
>
> Can be explained in description, like
> mboxes:
> description: Each entry corresponds to one rem
Hi Rob,
Any feedback on the below topic?
Regards
Luca
On Donnerstag, 25. April 2024 20:54:40 MESZ Luca Weiss wrote:
> On Donnerstag, 25. April 2024 18:17:15 MESZ Rob Herring wrote:
> > On Wed, Apr 24, 2024 at 07:21:51PM +0200, Luca Weiss wrote:
> > > The qcom,ipc-N properti
Add the different services found on APR on some devices with SC7280 SoC.
Additionally add an empty sound node in the root node as is seen on
other SoC dtsi files so device dt's can easily use that.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 73
Add the required nodes for sound playback via a connected external
display (DisplayPort over USB-C).
Signed-off-by: Luca Weiss
---
Depends on a bunch of patches upstream doing bringup of Display (DSI),
DisplayPort, GPU, and then finally audio could land. But we're blocked
on DPU 1:1:1 topology
was never applied:
https://lore.kernel.org/linux-arm-msm/20230616103534.4031331-1-quic_m...@quicinc.com/
Signed-off-by: Luca Weiss
---
Luca Weiss (2):
arm64: dts: qcom: sc7280: Add APR nodes for sound
[DNM] arm64: dts: qcom: qcm6490-fairphone-fp5: Add DisplayPort sound
support
arch/
(at 202 MHz)
that clock also reports the correct rate now and avoids this warning:
[5.984062] mmc0: Card appears overclocked; req 20200 Hz, actual
6312499237 Hz
Fixes: 131abae905df ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: Luca Weiss
---
drivers/clk/qcom/gcc-sm6
Deprecate the qcom,ipc way of accessing the mailbox in favor of the
'mboxes' property.
Update the example to use mboxes.
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation
Deprecate the qcom,ipc way of accessing the mailbox in favor of the
'mboxes' property.
Update the example to use mboxes.
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
...@z3ntu.xyz/
Signed-off-by: Luca Weiss
---
Luca Weiss (2):
dt-bindings: remoteproc: qcom,smd-edge: Mark qcom,ipc as deprecated
dt-bindings: soc: qcom,smp2p: Mark qcom,ipc as deprecated
Documentation/devicetree/bindings/remoteproc/qcom,smd-edge.yaml | 3 ++-
Documentation/devicetree/bindings
On Donnerstag, 25. April 2024 18:17:15 MESZ Rob Herring wrote:
> On Wed, Apr 24, 2024 at 07:21:51PM +0200, Luca Weiss wrote:
> > The qcom,ipc-N properties are essentially providing a reference to a
> > mailbox, so allow using the mboxes property to do the same in a more
>
Add support for using the mbox interface instead of manually writing to
the syscon. With this change the driver will attempt to get the mailbox
first, and if that fails it will fall back to the existing way of using
qcom,ipc-* properties and converting to syscon.
Signed-off-by: Luca Weiss
mbox-names = "ipc-1", "ipc-2", "ipc-3";
But also here the name with 'ipc-N' is probably not particularly
fitting?
Please let me know your thoughts and any suggestions.
Signed-off-by: Luca Weiss
---
Luca Weiss (2):
dt-bindings: soc: qcom,smsm: Allow specifyi
to
the mboxes property by index, starting at 0 since that's a valid SMSM
host also.
The new example shows how an smsm node with just qcom,ipc-3 should be
specified with the mboxes property.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/soc/qcom/qcom,smsm.yaml| 48
On Mittwoch, 24. April 2024 18:23:53 MESZ Luca Weiss wrote:
> The first patch is for removing a bogus error warning I've noticed while
> developing this on msm8226 - there the patches are also coming later for
> this SoC since apcs is getting hooked up to cpufreq there also.
>
> Ap
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 14 +++---
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974
expect any
complications with this.
Signed-off-by: Luca Weiss
---
Luca Weiss (7):
rpmsg: qcom_smd: Don't print error during probe deferral
ARM: dts: qcom: msm8974: Use mboxes properties for APCS
arm64: dts: qcom: msm8916: Use mboxes properties for APCS
arm64: dts: qcom: ms
When the mailbox driver has not probed yet, skip printing the error
message since it's just going to confuse users.
Signed-off-by: Luca Weiss
---
drivers/rpmsg/qcom_smd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/msm8939.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi
b/arch/arm64
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi
b/arch
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi
b/arch
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi
b/arch/arm64
Instead of passing the syscon to the various nodes, use the mbox
interface using the mboxes property.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/msm8976.dtsi | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi
b/arch
On Thu Apr 18, 2024 at 12:01 PM CEST, Konrad Dybcio wrote:
> On 18.04.2024 8:36 AM, Luca Weiss wrote:
> > Add a node for the vibrator module found inside the PMI632.
> >
> > Signed-off-by: Luca Weiss
> > ---
>
> Reviewed-by: Konrad Dybcio
>
> On a side not
Enable the vibrator on the PMI632 which is used on this phone.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
b/arch/arm64/boot/dts/qcom/sdm632-fairphone
Add a node for the vibrator module found inside the PMI632.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/pmi632.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi632.dtsi
b/arch/arm64/boot/dts/qcom/pmi632.dtsi
index 94d53b1cf6c8..b4313728f3e7
://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git/
Signed-off-by: Luca Weiss
---
Luca Weiss (2):
arm64: dts: qcom: pmi632: Add vibrator
arm64: dts: qcom: sdm632-fairphone-fp3: Enable vibrator
arch/arm64/boot/dts/qcom/pmi632.dtsi | 6 ++
arch/arm64/boot/dts/qcom/sdm632
Hello Steven,
On Mon, 15 Apr 2024 04:44:30 -0400
Steven Rostedt wrote:
> On Mon, 18 Mar 2024 16:43:07 +0100
> Luca Ceresoli wrote:
>
> > However the arrows are still reversed.
>
> This requires a kernel change. The problem is that the print fmt has:
>
> print fm
On Fri Feb 16, 2024 at 2:22 PM CET, Luca Weiss wrote:
> Add the various Bluetooth version identifiers found in the "Assigned
> Numbers" document[0] from the Bluetooth SIG.
>
> [0] https://www.bluetooth.com/specifications/assigned-numbers/
Hi all,
Is there any interes
Add the PBS (Programmable Boot Sequencer) to the list of devices.
Reviewed-by: Bjorn Andersson
Signed-off-by: Luca Weiss
---
Changes in v2:
- Pick up tags
- Rebase on linux-next, drop merged patches
- Link to v1:
https://lore.kernel.org/r/20240205-pmi632-ppg-v1-0-e236c95a2...@fairphone.com
Some SC7280-based boards crash when providing the "secure_non_pixel"
context bank, so allow only one iommu in the bindings also.
Acked-by: Krzysztof Kozlowski
Signed-off-by: Luca Weiss
---
Reference:
https://lore.kernel.org/linux-arm-msm/20231201-sc7280-venus-pas-v3-2-bc132dc5f...@fai
Define the USB-C orientation GPIOs so that the USB-C ports orientation
is known without having to resort to the altmode notifications.
On PCB level this is the signal from PM7250B (pin CC_OUT) which is
called USB_PHY_PS.
Signed-off-by: Luca Weiss
---
Depends on (for bindings):
https
Follow the gpio-hog bindings and use otg-hog as node name.
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
b/arch/arm
Allow specifying a GPIO hog, as already used on
qcom-msm8974-lge-nexus5-hammerhead.dts.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 12
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom
Resolve the dt validation failure on Nexus 5.
Signed-off-by: Luca Weiss
---
Changes in v2:
- Use simpler regex from tlmm bindings (Krzysztof)
- Link to v1:
https://lore.kernel.org/r/20240408-qcom-pmic-gpio-hog-v1-0-f61fc5323...@z3ntu.xyz
---
Luca Weiss (2):
dt-bindings: pinctrl: qcom
On Dienstag, 9. April 2024 17:10:41 CEST Rob Herring wrote:
> On Sun, Apr 07, 2024 at 11:58:29AM +0200, Luca Weiss wrote:
> > The original motivation is that a bunch of other schemas fail to
> > validate qcom,halt-regs, for example like in the following examples:
> >
> &g
-pcie-ctrl']
from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml#
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 6 --
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
b/arch/arm/boot/dts/qcom
Add compatible for the Qualcomm MSM8974 APCS block.
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git
a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
b/Documentation
Finally fix a warning about the apcs-global syscon used on msm8974 that
has been around forever.
Signed-off-by: Luca Weiss
---
Luca Weiss (2):
dt-bindings: mailbox: qcom: Add MSM8974 APCS compatible
ARM: dts: qcom: msm8974: Use proper compatible for APCS syscon
.../devicetree
On Montag, 8. April 2024 19:26:49 CEST Konrad Dybcio wrote:
>
> On 4/8/24 18:39, Luca Weiss wrote:
> > Allow specifying a GPIO hog, as already used on
> > qcom-msm8974-lge-nexus5-hammerhead.dts.
> >
> > Signed-off-by: Luca Weiss
> > ---
> > .../devic
Follow the gpio-hog bindings and use otg-hog as node name.
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
b/arch/arm
Resolve the dt validation failure on Nexus 5.
Signed-off-by: Luca Weiss
---
Luca Weiss (2):
dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes
ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name
.../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 12
Allow specifying a GPIO hog, as already used on
qcom-msm8974-lge-nexus5-hammerhead.dts.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 12
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom
bus ("inv_mpu_i2c_aux_bus"). Since
the driver is also based on "default: return true" this should scale
better into the future.
Signed-off-by: Luca Weiss
---
This fixes dt validation error on qcom-msm8974-lge-nexus5-hammerhead
which uses mpu6515
arch/arm/boot/dts/qcom/qco
Set the 'items' correctly for the qcom,halt-regs property and update the
description to match what it should be.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/remoteproc/qcom,sdm845-adsp-pil.yaml| 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git
Set the 'items' correctly for the qcom,halt-regs property and update the
description to match what it should be.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml| 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git
Set the 'items' correctly for the qcom,halt-regs property and update the
description to match what it should be.
Signed-off-by: Luca Weiss
---
.../devicetree/bindings/remoteproc/qcom,qcs404-cdsp-pil.yaml| 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git
to validate qcom,halt-regs in the
schemas I'm touching.
Signed-off-by: Luca Weiss
---
Luca Weiss (3):
dt-bindings: remoteproc: qcom,qcs404-cdsp-pil: Fix qcom,halt-regs
definition
dt-bindings: remoteproc: qcom,sc7280-wpss-pil: Fix qcom,halt-regs
definition
dt-bindings: remoteproc: qcom
On Samstag, 6. April 2024 18:45:21 CEST Jonathan Cameron wrote:
> On Sat, 06 Apr 2024 17:31:04 +0200
> Luca Weiss wrote:
>
> > For example the BMP280 barometric pressure sensor on Qualcomm
> > MSM8974-based Nexus 5 smartphone exposes such file in sysfs.
> > Docum
Enable the vibrator connected to PM8941 found on the Sony shinano
platform.
Signed-off-by: Luca Weiss
---
.../arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi | 4
1 file changed, 4 insertions(+)
diff --git
a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano
For example the BMP280 barometric pressure sensor on Qualcomm
MSM8974-based Nexus 5 smartphone exposes such file in sysfs.
Document it.
Signed-off-by: Luca Weiss
---
Documentation/ABI/testing/sysfs-bus-iio | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/ABI
the phone with at least some amount of power.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 47 ++
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 60 ++-
2 files changed, 106 insertions(+), 1 deletion(-)
diff --git a/arch
Type-C port management functionality lives inside of the PMIC block on
pm7250b.
The Type-C port management logic controls orientation detection,
vbus/vconn sense and to send/receive Type-C Power Domain messages.
Reviewed-by: Bryan O'Donoghue
Reviewed-by: Konrad Dybcio
Signed-off-by: Luca Weiss
Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.
Reviewed-by: Bryan O'Donoghue
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++
1 file changed, 6 insertions
Kozlowski
To: Conor Dooley
Cc: ~postmarketos/upstream...@lists.sr.ht
Cc: phone-de...@vger.kernel.org
Cc: linux-arm-...@vger.kernel.org
Cc: devicet...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luca Weiss
Changes in v2:
- Move disabled as last property for pm7250b_vbus
Configure the Type-C and VBUS regulator on PM7250B and wire it up to the
USB PHY, so that USB role and orientation switching works.
Signed-off-by: Luca Weiss
---
With this patch I'm not quite sure if the 'ports' are connected
correctly, though functionally everything appears to work fine
Type-C port management functionality lives inside of the PMIC block on
pm7250b.
The Type-C port management logic controls orientation detection,
vbus/vconn sense and to send/receive Type-C Power Domain messages.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/pm7250b.dtsi | 39
Add the required DTS node for the USB VBUS output regulator, which is
available on PM7250B. This will provide the VBUS source to connected
peripherals.
Signed-off-by: Luca Weiss
---
arch/arm64/boot/dts/qcom/pm7250b.dtsi | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot
The PM6150 PMIC has the same Type-C register block as the PM8150B.
Define corresponding compatible string, having the qcom,pm8150b-vbus-reg
as a fallback.
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git
The VBUS register block on the PM6150 PMIC shares the design with the
PM8150B one. Define corresponding compatible string, having the
qcom,pm8150b-vbus-reg as a fallback.
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml | 1 +
1 file changed
This series adds support for Type-C Port Management on the Fairphone 4
which enables USB role switching and orientation switching.
This enables a user for example to plug in a USB stick or a USB keyboard
to the Type-C port.
Signed-off-by: Luca Weiss
---
Luca Weiss (5):
dt-bindings
On Mon Dec 4, 2023 at 6:28 PM CET, Manivannan Sadhasivam wrote:
> On Mon, Dec 04, 2023 at 01:21:42PM +0100, Luca Weiss wrote:
> > On Mon Dec 4, 2023 at 1:15 PM CET, Nitin Rawat wrote:
> > >
> > >
> > > On 12/4/2023 3:54 PM, Luca Weiss wrote:
> > > >
Hello Steven,
On Fri, 15 Mar 2024 14:58:52 -0400
Steven Rostedt wrote:
> On Fri, 15 Mar 2024 19:03:12 +0100
> Luca Ceresoli wrote:
>
> > > >
> > > > I've come across an unexpected behaviour in the kernel tracing
> > > > infrastructure that looks
-msm8974pro-fairphone-fp2.dtb: /: memory:
False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]}
from schema $id: http://devicetree.org/schemas/root-node.yaml#
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 2 +-
1 file changed, 1 insertion(+), 1
Add an empty /chosen node to the dtsi like is common on most other
Qualcomm SoC files, so that various pieces of software expecting this
node to exist don't complain.
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git
One fix for dt schema validation, one for the /chosen node.
Signed-off-by: Luca Weiss
---
Luca Weiss (2):
ARM: dts: qcom: msm8974: Add @0 to memory node name
ARM: dts: qcom: msm8974: Add empty chosen node
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 4 +++-
1 file changed, 3
Hello Steven,
thanks for the quick feedback!
On Fri, 15 Mar 2024 13:21:46 -0400
Steven Rostedt wrote:
> On Fri, 15 Mar 2024 17:49:00 +0100
> Luca Ceresoli wrote:
>
> > Hello Linux tracing maintainers,
>
> Hi Luca!
>
> >
> > I've come across an unexpe
ws are still wrong with trace-cmd.
I have no idea how to further debug this and after a quick look at the
macros I can honestly say I'm not feeling brave enough to dig into them
in a late Friday afternoon.
Any hints?
Am I doing anything wrong?
Is %c supposed to work in tracing macros?
Best regards,
Luca
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent
DRM bridge device instead of handcoding corresponding functionality.
Signed-off-by: Luca Weiss
---
Very similar to this patch:
c5d296bad640 ("usb: typec: nb7vpq904m: switch to DRM_AUX_BRIDGE")
---
drivers/usb
Add the compatible for this Samsung smartphone ("phablet" as it was
named in that era).
Acked-by: Krzysztof Kozlowski
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bi
From: Adam Honse
Add the devicetree for this "phablet" using the Snapdragon 800 SoC.
Signed-off-by: Adam Honse
[l...@z3ntu.xyz: clean up, prepare for upstream]
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/Makefile| 1 +
.../boot/dts/qcom/qcom-msm89
Add the dts for "hlte" which is a phablet from 2013.
Signed-off-by: Luca Weiss
---
Changes in v2:
- Correct property order (Konrad)
- Pick up tags
- Link to v1:
https://lore.kernel.org/r/20240310-samsung-hlte-v1-0-e9b55bf98...@z3ntu.xyz
---
Adam Honse (1):
ARM: dts: qcom: ms
Add the dts for the Xperia Z3 smartphone which is based on Sony's
shinano platform, so at the moment there's little device-specific dts to
add on top of the common parts.
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/Makefile| 1 +
.../qcom-msm8974pro-sony-xperia
Add the compatible for this Sony smartphone.
Acked-by: Krzysztof Kozlowski
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml
b/Documentation/devicetree/bindings/arm
In preparation for adding the Sony Xperia Z3 smartphone, split the
common parts into shinano-common.dtsi.
No functional change intended.
Reviewed-by: Konrad Dybcio
Signed-off-by: Luca Weiss
---
.../qcom-msm8974pro-sony-xperia-shinano-castor.dts | 863 +
...com-msm8974pro
Prepare for adding sony-leo dts by splitting common parts into a
separate dtsi file.
Then add the dts for Sony Xperia Z3.
Depends on:
https://lore.kernel.org/linux-arm-msm/20240306-castor-changes-v1-0-2286eaf85...@z3ntu.xyz/T/
Signed-off-by: Luca Weiss
---
Changes in v2:
- Add leo dtb
On Montag, 11. März 2024 15:23:30 CET Rob Herring wrote:
>
> On Sun, 10 Mar 2024 15:13:35 +0100, Luca Weiss wrote:
> > Add the dts for "hlte" which is a phablet from 2013.
> >
> > Signed-off-by: Luca Weiss
> > ---
> > Adam Honse (1):
> >
From: Adam Honse
Add the devicetree for this "phablet" using the Snapdragon 800 SoC.
Signed-off-by: Adam Honse
[l...@z3ntu.xyz: clean up, prepare for upstream]
Signed-off-by: Luca Weiss
---
arch/arm/boot/dts/qcom/Makefile| 1 +
.../boot/dts/qcom/qcom-msm89
Add the compatible for this Samsung smartphone ("phablet" as it was
named in that era).
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml
b/Documentation/
Add the dts for "hlte" which is a phablet from 2013.
Signed-off-by: Luca Weiss
---
Adam Honse (1):
ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3
Luca Weiss (1):
dt-bindings: arm: qcom: Add Samsung Galaxy Note 3
Documentation/devicetree/bindings/arm/qcom.yaml|
On Sonntag, 10. März 2024 12:41:09 CET Luca Weiss wrote:
> Add the dts for the Xperia Z3 smartphone which is based on Sony's
> shinano platform, so at the moment there's little device-specific dts to
> add on top of the common parts.
>
> Signed-off-by: Luca Weiss
> ---
>
Add the compatible for this Sony smartphone.
Signed-off-by: Luca Weiss
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml
b/Documentation/devicetree/bindings/arm/qcom.yaml
index 1a5fb889a444
Add the dts for the Xperia Z3 smartphone which is based on Sony's
shinano platform, so at the moment there's little device-specific dts to
add on top of the common parts.
Signed-off-by: Luca Weiss
---
.../qcom-msm8974pro-sony-xperia-shinano-leo.dts| 44 ++
1 file changed
In preparation for adding the Sony Xperia Z3 smartphone, split the
common parts into shinano-common.dtsi.
No functional change intended.
Signed-off-by: Luca Weiss
---
.../qcom-msm8974pro-sony-xperia-shinano-castor.dts | 853 -
...com-msm8974pro-sony-xperia-shinano
Prepare for adding sony-leo dts by splitting common parts into a
separate dtsi file.
Then add the dts for Sony Xperia Z3.
Depends on:
https://lore.kernel.org/linux-arm-msm/20240306-castor-changes-v1-0-2286eaf85...@z3ntu.xyz/T/
Signed-off-by: Luca Weiss
---
Luca Weiss (3):
ARM: dts: qcom
1 - 100 of 2179 matches
Mail list logo
