On Mon, Dec 2, 2013 at 12:28 PM, panchaxari
wrote:
> ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR has been enabled as default configs
> to integrator platform.
I have tested this now on Integrator/AP and Integrator/CP and it works
fine, so I'm queueing this for v3.14.
Yours,
Linus Walleij
--
To
On Mon, Dec 2, 2013 at 12:28 PM, panchaxari
panchaxari.prasannamur...@linaro.org wrote:
ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR has been enabled as default configs
to integrator platform.
I have tested this now on Integrator/AP and Integrator/CP and it works
fine, so I'm queueing this for v3.14.
On Mon, Dec 02, 2013 at 01:57:10PM +0100, Linus Walleij wrote:
> Good point, I've also seen "[RFT]" (request for testing) in some
> cases.
Note that it still needs [PATCH] before it. A good way to integrate it
is to use the form "[PATCH CFT n/nn]" where n/nn exists if you have a
series.
--
To
On Mon, Dec 2, 2013 at 12:46 PM, Russell King - ARM Linux
wrote:
> On Mon, Dec 02, 2013 at 04:58:51PM +0530, panchaxari wrote:
>>
>> Requesting maintainers of Integrator platform to evaluate the changes on the
>> board and comment, as I dont have the board for testing and also requesting
>> an
On Mon, Dec 02, 2013 at 04:58:51PM +0530, panchaxari wrote:
> ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR has been enabled as default configs
> to integrator platform.
>
> Introduction of PHYS_VIRT config as default would enable phy-to-virt and
> virt-to-phy translation function at boot and module
ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR has been enabled as default configs
to integrator platform.
Introduction of PHYS_VIRT config as default would enable phy-to-virt and
virt-to-phy translation function at boot and module loading time
and enforce dynamic reallocation of memory. AUTO_ZRELADDR
ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR has been enabled as default configs
to integrator platform.
Introduction of PHYS_VIRT config as default would enable phy-to-virt and
virt-to-phy translation function at boot and module loading time
and enforce dynamic reallocation of memory. AUTO_ZRELADDR
On Mon, Dec 02, 2013 at 04:58:51PM +0530, panchaxari wrote:
ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR has been enabled as default configs
to integrator platform.
Introduction of PHYS_VIRT config as default would enable phy-to-virt and
virt-to-phy translation function at boot and module loading
On Mon, Dec 2, 2013 at 12:46 PM, Russell King - ARM Linux
li...@arm.linux.org.uk wrote:
On Mon, Dec 02, 2013 at 04:58:51PM +0530, panchaxari wrote:
Requesting maintainers of Integrator platform to evaluate the changes on the
board and comment, as I dont have the board for testing and also
On Mon, Dec 02, 2013 at 01:57:10PM +0100, Linus Walleij wrote:
Good point, I've also seen [RFT] (request for testing) in some
cases.
Note that it still needs [PATCH] before it. A good way to integrate it
is to use the form [PATCH CFT n/nn] where n/nn exists if you have a
series.
--
To
10 matches
Mail list logo