Am Montag 09 Juli 2007 schrieb Peer Chen:
> It's a rule for all our drivers not just for linux, also if we put the
> Maxtor drive to the blacklist so that its NCQ function won't be enable for
> all controllers of other vendors,but we don't have the strong evidence that
> those Maxtor HDDs are also
Am Montag 09 Juli 2007 schrieb Peer Chen:
It's a rule for all our drivers not just for linux, also if we put the
Maxtor drive to the blacklist so that its NCQ function won't be enable for
all controllers of other vendors,but we don't have the strong evidence that
those Maxtor HDDs are also
It's a rule for all our drivers not just for linux, also if we put the Maxtor
drive to the blacklist so that its NCQ function won't be enable for all
controllers of other vendors,but we don't have the strong evidence that those
Maxtor HDDs are also broken for other controllers.
BRs
Peer Chen
It's a rule for all our drivers not just for linux, also if we put the Maxtor
drive to the blacklist so that its NCQ function won't be enable for all
controllers of other vendors,but we don't have the strong evidence that those
Maxtor HDDs are also broken for other controllers.
BRs
Peer Chen
kuan luo írta:
From: Kuan Luo <[EMAIL PROTECTED]>
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
controller. NCQ function is disable by default, you can enable it with
'swncq=1'. NCQ will be turned off if the drive is Maxtor on MCP51 or
MCP55 rev 0xa2 platform.
kuan luo írta:
From: Kuan Luo [EMAIL PROTECTED]
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
controller. NCQ function is disable by default, you can enable it with
'swncq=1'. NCQ will be turned off if the drive is Maxtor on MCP51 or
MCP55 rev 0xa2 platform.
From: Kuan Luo <[EMAIL PROTECTED]>
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
controller. NCQ function is disable by default, you can enable it with
'swncq=1'. NCQ will be turned off if the drive is Maxtor on MCP51 or
MCP55 rev 0xa2 platform.
Signed-off-by: Kuan Luo
From: Kuan Luo [EMAIL PROTECTED]
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
controller. NCQ function is disable by default, you can enable it with
'swncq=1'. NCQ will be turned off if the drive is Maxtor on MCP51 or
MCP55 rev 0xa2 platform.
Signed-off-by: Kuan Luo
Zoltan Boszormenyi wrote:
Hi,
Zoltan Boszormenyi írta:
Hi,
I am testing your current code with akpm's beautifying patches
for about an hour now. I have seen no problems with it so far.
Still using the patch on 2.6.22-rc6 and no problems so far.
It's really stable. I am looking forward to
Zoltan Boszormenyi wrote:
Hi,
Zoltan Boszormenyi írta:
Hi,
I am testing your current code with akpm's beautifying patches
for about an hour now. I have seen no problems with it so far.
Still using the patch on 2.6.22-rc6 and no problems so far.
It's really stable. I am looking forward to
Hi,
Zoltan Boszormenyi írta:
Hi,
I am testing your current code with akpm's beautifying patches
for about an hour now. I have seen no problems with it so far.
Still using the patch on 2.6.22-rc6 and no problems so far.
It's really stable. I am looking forward to the next version and
the
Hi,
Zoltan Boszormenyi írta:
Hi,
I am testing your current code with akpm's beautifying patches
for about an hour now. I have seen no problems with it so far.
Still using the patch on 2.6.22-rc6 and no problems so far.
It's really stable. I am looking forward to the next version and
the
Am Mittwoch 27 Juni 2007 schrieb Peer Chen:
> We did the many test with the new version driver and didn't encounter
> that problem, but in certain cases, DMASETUP command packets from drive
> to the controller are corrupted, and the controller issues an R_ERR to
> the drive. Drives that comply
Hi,
I am testing your current code with akpm's beautifying patches
for about an hour now. I have seen no problems with it so far.
**A pretty good way. I will modify my code.
Please, cc me when sending your next patch to LKML, thanks.
Best regards,
Zoltán Böszörményi
-
To unsubscribe
A pretty good way. I will modify my code.
-Original Message-
From: Andrew Morton [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 27, 2007 5:21 PM
To: Kuan Luo
Cc: linux-kernel@vger.kernel.org; [EMAIL PROTECTED]; Peer Chen
Subject: Re: [PATCH] ata: Add the SW NCQ support to sata_nv for
On Wed, 27 Jun 2007 17:09:29 +0800 "Kuan Luo" <[EMAIL PROTECTED]> wrote:
> > +static void nv_swncq_qc_to_dq(struct ata_port *ap, struct
> ata_queued_cmd *qc)
> > +{
> > + struct nv_swncq_port_priv *pp = ap->private_data;
> > + defer_queue_t *dq = >defer_queue;
> > +
> > + /* queue is
> +static void nv_swncq_qc_to_dq(struct ata_port *ap, struct
ata_queued_cmd *qc)
> +{
> + struct nv_swncq_port_priv *pp = ap->private_data;
> + defer_queue_t *dq = >defer_queue;
> +
> + /* queue is full */
> + WARN_ON((dq->rear + 1) % (ATA_MAX_QUEUE + 1) == dq->front);
Peer Chen wrote:
We did the many test with the new version driver and didn't encounter
that problem, but in certain cases, DMASETUP command packets from drive
to the controller are corrupted, and the controller issues an R_ERR to
the drive. Drives that comply with SATA spec will re-transmit the
We did the many test with the new version driver and didn't encounter
that problem, but in certain cases, DMASETUP command packets from drive
to the controller are corrupted, and the controller issues an R_ERR to
the drive. Drives that comply with SATA spec will re-transmit the
corrupted packet
We did the many test with the new version driver and didn't encounter
that problem, but in certain cases, DMASETUP command packets from drive
to the controller are corrupted, and the controller issues an R_ERR to
the drive. Drives that comply with SATA spec will re-transmit the
corrupted packet
Peer Chen wrote:
We did the many test with the new version driver and didn't encounter
that problem, but in certain cases, DMASETUP command packets from drive
to the controller are corrupted, and the controller issues an R_ERR to
the drive. Drives that comply with SATA spec will re-transmit the
+static void nv_swncq_qc_to_dq(struct ata_port *ap, struct
ata_queued_cmd *qc)
+{
+ struct nv_swncq_port_priv *pp = ap-private_data;
+ defer_queue_t *dq = pp-defer_queue;
+
+ /* queue is full */
+ WARN_ON((dq-rear + 1) % (ATA_MAX_QUEUE + 1) == dq-front);
This is
On Wed, 27 Jun 2007 17:09:29 +0800 Kuan Luo [EMAIL PROTECTED] wrote:
+static void nv_swncq_qc_to_dq(struct ata_port *ap, struct
ata_queued_cmd *qc)
+{
+ struct nv_swncq_port_priv *pp = ap-private_data;
+ defer_queue_t *dq = pp-defer_queue;
+
+ /* queue is full */
+
A pretty good way. I will modify my code.
-Original Message-
From: Andrew Morton [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 27, 2007 5:21 PM
To: Kuan Luo
Cc: linux-kernel@vger.kernel.org; [EMAIL PROTECTED]; Peer Chen
Subject: Re: [PATCH] ata: Add the SW NCQ support to sata_nv for
Hi,
I am testing your current code with akpm's beautifying patches
for about an hour now. I have seen no problems with it so far.
**A pretty good way. I will modify my code.
Please, cc me when sending your next patch to LKML, thanks.
Best regards,
Zoltán Böszörményi
-
To unsubscribe
Am Mittwoch 27 Juni 2007 schrieb Peer Chen:
We did the many test with the new version driver and didn't encounter
that problem, but in certain cases, DMASETUP command packets from drive
to the controller are corrupted, and the controller issues an R_ERR to
the drive. Drives that comply with
On Wed, 27 Jun 2007 11:04:44 +0800 "kuan luo" <[EMAIL PROTECTED]> wrote:
> Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
> controller.
> NCQ function is disable by default, you can enable it with 'swncq=1'
>
This patch adds a large amount of new trailing whitespace.
>
kuan luo wrote:
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
controller.
NCQ function is disable by default, you can enable it with 'swncq=1'
Signed-off-by: Kuan Luo <[EMAIL PROTECTED]>
Signed-off-by: Peer Chen <[EMAIL PROTECTED]>
Haven't reviewed in detail, but does
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA controller.
NCQ function is disable by default, you can enable it with 'swncq=1'
Signed-off-by: Kuan Luo <[EMAIL PROTECTED]>
Signed-off-by: Peer Chen <[EMAIL PROTECTED]>
---
diff -Nurp a/sata_nv.c b/sata_nv.c
--- a/sata_nv.c
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA controller.
NCQ function is disable by default, you can enable it with 'swncq=1'
Signed-off-by: Kuan Luo [EMAIL PROTECTED]
Signed-off-by: Peer Chen [EMAIL PROTECTED]
---
diff -Nurp a/sata_nv.c b/sata_nv.c
--- a/sata_nv.c
kuan luo wrote:
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
controller.
NCQ function is disable by default, you can enable it with 'swncq=1'
Signed-off-by: Kuan Luo [EMAIL PROTECTED]
Signed-off-by: Peer Chen [EMAIL PROTECTED]
Haven't reviewed in detail, but does
On Wed, 27 Jun 2007 11:04:44 +0800 kuan luo [EMAIL PROTECTED] wrote:
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA
controller.
NCQ function is disable by default, you can enable it with 'swncq=1'
This patch adds a large amount of new trailing whitespace.
---
diff
32 matches
Mail list logo
