+ Stephen Rothwell
On 25 August 2015 at 14:06, Ulf Hansson wrote:
> On 17 August 2015 at 13:58, Srinivas Kandagatla
> wrote:
>> Some of the pin-controllers like the Qualcomms "qcom,pm8921", which
>> require a pinconf to be setup to use pins as gpios. Using the pins
>> directly without pinconf
+ Stephen Rothwell
On 25 August 2015 at 14:06, Ulf Hansson ulf.hans...@linaro.org wrote:
On 17 August 2015 at 13:58, Srinivas Kandagatla
srinivas.kandaga...@linaro.org wrote:
Some of the pin-controllers like the Qualcomms qcom,pm8921, which
require a pinconf to be setup to use pins as gpios.
On 17 August 2015 at 13:58, Srinivas Kandagatla
wrote:
> Some of the pin-controllers like the Qualcomms "qcom,pm8921", which
> require a pinconf to be setup to use pins as gpios. Using the pins
> directly without pinconf setup would result in incorrect output voltage
> or load settings. On the
On 17 August 2015 at 13:58, Srinivas Kandagatla
srinivas.kandaga...@linaro.org wrote:
Some of the pin-controllers like the Qualcomms qcom,pm8921, which
require a pinconf to be setup to use pins as gpios. Using the pins
directly without pinconf setup would result in incorrect output voltage
or
Some of the pin-controllers like the Qualcomms "qcom,pm8921", which
require a pinconf to be setup to use pins as gpios. Using the pins
directly without pinconf setup would result in incorrect output voltage
or load settings. On the other hand pwrseq code does not configure the
pinctrl by default
Some of the pin-controllers like the Qualcomms qcom,pm8921, which
require a pinconf to be setup to use pins as gpios. Using the pins
directly without pinconf setup would result in incorrect output voltage
or load settings. On the other hand pwrseq code does not configure the
pinctrl by default as
6 matches
Mail list logo
