Thanks for your suggestion!
I will change the code.
thanks.
-Original Message-
From: Florian Fainelli
Sent: 2020年7月21日 12:57
To: Hongbo Wang ; Xiaoliang Yang
; allan.niel...@microchip.com; Po Liu
; Claudiu Manoil ; Alexandru Marginean
; Vladimir Oltean ; Leo
Li ; Mingkai Hu ;
On 7/20/2020 3:41 AM, hongbo.w...@nxp.com wrote:
> From: "hongbo.wang"
>
> the following command can be supported:
> ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
You should probably include the switch driver that is going to be
benefiting from doing these changes in
Hi Nikolay,
Thanks for your comments.
The original intention is that I want to run a command to set single port into
QinQ mode,
the related commands are:
ip link set br0 type bridge vlan_protocol 802.1ad // this command will set all
ports under the bridge br0
ip link add link swp1 name
On 20/07/2020 13:41, hongbo.w...@nxp.com wrote:
> From: "hongbo.wang"
>
> the following command can be supported:
> ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
>
> Signed-off-by: hongbo.wang
> ---
> include/uapi/linux/if_bridge.h | 1 +
> net/dsa/slave.c
From: "hongbo.wang"
the following command can be supported:
ip link add link swp1 name swp1.100 type vlan protocol 802.1ad id 100
Signed-off-by: hongbo.wang
---
include/uapi/linux/if_bridge.h | 1 +
net/dsa/slave.c| 9 +++--
2 files changed, 8 insertions(+), 2 deletions(-)
5 matches
Mail list logo