On 11/3/2020 9:35 AM, Dan Murphy wrote:
> Andrew
>
> On 11/3/20 11:18 AM, Andrew Lunn wrote:
>> On Tue, Nov 03, 2020 at 11:07:00AM -0600, Dan Murphy wrote:
>>> Andrew
>>>
>>> On 10/30/20 3:15 PM, Andrew Lunn wrote:
> +static int dp83td510_config_init(struct phy_device *phydev)
> +{
> > > > drivers/net/phy/dp83td510.c:70:11: warning: symbol
> > > > 'dp83td510_feature_array' was not declared. Should it be static?
> > > I did not see this warning. Did you use W=1?
> > I _think_ that one is W=1. All the PHY drivers are W=1 clean, and i
> > want to keep it that way. And i hope
Andrew
On 11/3/20 11:18 AM, Andrew Lunn wrote:
On Tue, Nov 03, 2020 at 11:07:00AM -0600, Dan Murphy wrote:
Andrew
On 10/30/20 3:15 PM, Andrew Lunn wrote:
+static int dp83td510_config_init(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510 = phydev->priv;
+ int
Andrew
On 11/3/20 11:21 AM, Andrew Lunn wrote:
On Tue, Nov 03, 2020 at 11:09:44AM -0600, Dan Murphy wrote:
Hello
On 10/30/20 6:03 PM, Jakub Kicinski wrote:
On Fri, 30 Oct 2020 12:29:50 -0500 Dan Murphy wrote:
The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that
On Tue, Nov 03, 2020 at 11:09:44AM -0600, Dan Murphy wrote:
> Hello
>
> On 10/30/20 6:03 PM, Jakub Kicinski wrote:
> > On Fri, 30 Oct 2020 12:29:50 -0500 Dan Murphy wrote:
> > > The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
> > > that supports 10M single pair cable.
> >
On Tue, Nov 03, 2020 at 11:07:00AM -0600, Dan Murphy wrote:
> Andrew
>
> On 10/30/20 3:15 PM, Andrew Lunn wrote:
> > > +static int dp83td510_config_init(struct phy_device *phydev)
> > > +{
> > > + struct dp83td510_private *dp83td510 = phydev->priv;
> > > + int mst_slave_cfg;
> > > + int ret = 0;
Hello
On 10/30/20 6:03 PM, Jakub Kicinski wrote:
On Fri, 30 Oct 2020 12:29:50 -0500 Dan Murphy wrote:
The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that supports 10M single pair cable.
The device supports both 2.4-V p2p and 1-V p2p output voltage as defined
by IEEE
Andrew
On 10/30/20 3:15 PM, Andrew Lunn wrote:
+static int dp83td510_config_init(struct phy_device *phydev)
+{
+ struct dp83td510_private *dp83td510 = phydev->priv;
+ int mst_slave_cfg;
+ int ret = 0;
+
+ if (phy_interface_is_rgmii(phydev)) {
+ if
On Fri, Oct 30, 2020 at 12:29:50PM -0500, Dan Murphy wrote:
> The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
> that supports 10M single pair cable.
>
> The device supports both 2.4-V p2p and 1-V p2p output voltage as defined
> by IEEE 802.3cg 10Base-T1L specfications.
On Fri, 30 Oct 2020 12:29:50 -0500 Dan Murphy wrote:
> The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
> that supports 10M single pair cable.
>
> The device supports both 2.4-V p2p and 1-V p2p output voltage as defined
> by IEEE 802.3cg 10Base-T1L specfications. These
> +static int dp83td510_config_init(struct phy_device *phydev)
> +{
> + struct dp83td510_private *dp83td510 = phydev->priv;
> + int mst_slave_cfg;
> + int ret = 0;
> +
> + if (phy_interface_is_rgmii(phydev)) {
> + if (dp83td510->rgmii_delay) {
> +
The DP83TD510E is an ultra-low power Ethernet physical layer transceiver
that supports 10M single pair cable.
The device supports both 2.4-V p2p and 1-V p2p output voltage as defined
by IEEE 802.3cg 10Base-T1L specfications. These modes can be forced via
the device tree or the device is defaulted
12 matches
Mail list logo
