On 10.1.2019 14:57, Shawn Guo wrote:
> @Vokáč,
>
> Please generate your patches against my for-next branch with dt-bindings
> being separate patch from dts one.
OK, thank you Shawn.
Michal
On Tue, Jan 08, 2019 at 12:11:50PM -0600, Rob Herring wrote:
> Humm, I thought Shawn had applied to his tree as there were some conflicts.
>
> Shawn, do you need me to resend?
Sorry. I was actually dropping the conflicting changes from my tree and
expecting you send the json-schema patch via
On Tue, Jan 8, 2019 at 10:09 AM Vokáč Michal wrote:
>
> On 8.1.2019 16:00, Vokáč Michal wrote:
> > On 8.1.2019 15:56, Rob Herring wrote:
> >> On Tue, Jan 8, 2019 at 5:43 AM Vokáč Michal wrote:
> >>>
> >>> On 29.12.2018 00:25, Rob Herring wrote:
> On Tue, Dec 18, 2018 at 02:42:11PM +,
On 8.1.2019 16:00, Vokáč Michal wrote:
> On 8.1.2019 15:56, Rob Herring wrote:
>> On Tue, Jan 8, 2019 at 5:43 AM Vokáč Michal wrote:
>>>
>>> On 29.12.2018 00:25, Rob Herring wrote:
On Tue, Dec 18, 2018 at 02:42:11PM +, Vokáč Michal wrote:
> These are i.MX6S/DL based SBCs embedded in
On 8.1.2019 15:56, Rob Herring wrote:
> On Tue, Jan 8, 2019 at 5:43 AM Vokáč Michal wrote:
>>
>> On 29.12.2018 00:25, Rob Herring wrote:
>>> On Tue, Dec 18, 2018 at 02:42:11PM +, Vokáč Michal wrote:
These are i.MX6S/DL based SBCs embedded in various Y Soft products.
All share the
On Tue, Jan 8, 2019 at 5:43 AM Vokáč Michal wrote:
>
> On 29.12.2018 00:25, Rob Herring wrote:
> > On Tue, Dec 18, 2018 at 02:42:11PM +, Vokáč Michal wrote:
> >> These are i.MX6S/DL based SBCs embedded in various Y Soft products.
> >> All share the same board design but have slightly
On Tue, Jan 8, 2019 at 8:25 AM Vokáč Michal wrote:
>
> On 8.1.2019 12:43, Vokáč Michal wrote:
> > On 29.12.2018 00:25, Rob Herring wrote:
> >> On Tue, Dec 18, 2018 at 02:42:11PM +, Vokáč Michal wrote:
> [...]
> >>> + {
> >>> + clock-frequency = <10>;
> >>> + pinctrl-names = "default";
On 8.1.2019 12:43, Vokáč Michal wrote:
> On 29.12.2018 00:25, Rob Herring wrote:
>> On Tue, Dec 18, 2018 at 02:42:11PM +, Vokáč Michal wrote:
[...]
>>> + {
>>> + clock-frequency = <10>;
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <_i2c3>;
>>> + status = "disabled";
>>> +
>>>
On 29.12.2018 00:25, Rob Herring wrote:
> On Tue, Dec 18, 2018 at 02:42:11PM +, Vokáč Michal wrote:
>> These are i.MX6S/DL based SBCs embedded in various Y Soft products.
>> All share the same board design but have slightly different HW
>> configuration.
>>
>> Ursa
>> - i.MX6S SoC, 512MB RAM
On 28.12.2018 19:20, Fabio Estevam wrote:
> On Tue, Dec 18, 2018 at 12:42 PM Vokáč Michal wrote:
>
>> + {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <_enet>;
>> + phy-mode = "rgmii-id";
>> + phy-reset-gpios = < 25 GPIO_ACTIVE_HIGH>;
>
> Are you sure this is active
On Tue, Dec 18, 2018 at 02:42:11PM +, Vokáč Michal wrote:
> These are i.MX6S/DL based SBCs embedded in various Y Soft products.
> All share the same board design but have slightly different HW
> configuration.
>
> Ursa
> - i.MX6S SoC, 512MB RAM DDR3, 4GB eMMC, microSD
> - parallel WVGA 7" LCD
Hi Vokáč,
On Tue, Dec 18, 2018 at 12:42 PM Vokáč Michal wrote:
> + {
> + pinctrl-names = "default";
> + pinctrl-0 = <_enet>;
> + phy-mode = "rgmii-id";
> + phy-reset-gpios = < 25 GPIO_ACTIVE_HIGH>;
Are you sure this is active high?
The FEC driver ignores the polarity
These are i.MX6S/DL based SBCs embedded in various Y Soft products.
All share the same board design but have slightly different HW
configuration.
Ursa
- i.MX6S SoC, 512MB RAM DDR3, 4GB eMMC, microSD
- parallel WVGA 7" LCD with touch panel
- 1x Eth (QCA8334 switch)
- USB OTG
- USB host (micro-B)
13 matches
Mail list logo
