Mimic U-Boot configuration to be sure all hardware registers are set
properly. This will be needed for future S2RAM operation.
Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com>
---
drivers/pci/controller/pci-aardvark.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/pci/controller/pci-aardvark.c
b/drivers/pci/controller/pci-aardvark.c
index 18120e312ae1..0f50163ae072 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -100,6 +100,8 @@
#define PCIE_CORE_CTRL2_STRICT_ORDER_ENABLE BIT(5)
#define PCIE_CORE_CTRL2_OB_WIN_ENABLE BIT(6)
#define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
+#define PCIE_PHY_REFCLK (CONTROL_BASE_ADDR +
0x14)
+#define PCIE_PHY_REFCLK_BUF_CTRL 0x1342
#define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30)
#define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
#define PCIE_MSG_PM_PME_MASK BIT(7)
@@ -243,6 +245,9 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
+ /* Set HW Reference Clock Buffer Control */
+ advk_writel(pcie, PCIE_PHY_REFCLK_BUF_CTRL, PCIE_PHY_REFCLK);
+
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
reg &= ~(CTRL_MODE_MASK << CTRL_MODE_SHIFT);
@@ -274,6 +279,15 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
PCIE_CORE_CTRL2_TD_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+ /* Set PCIe Device Control and Status 1 PF0 register */
+ reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
+ PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE;
+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
+
+ /* Program PCIe Control 2 to disable strict ordering */
+ reg = PCIE_CORE_CTRL2_RESERVED | PCIE_CORE_CTRL2_TD_ENABLE;
+ advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
+
/* Set GEN2 */
reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
reg &= ~PCIE_GEN_SEL_MSK;
--
2.19.1
