Signed-off-by: Frank Wang <frank.w...@rock-chips.com>
Acked-by: Rob Herring <r...@kernel.org>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
---

Changes in v7: None

Changes in v6:
 - Changed '_' to '-' for otg-id and otg-bvalid property.

Changes in v5:
 - Added 'reg' property to identify the different phy-blocks.

Changes in v4:
 - Used 'phy-supply' instead of 'vbus_*-supply'.

Changes in v3:
 - Added 'clocks' and 'clock-names' optional properties.
 - Specified 'otg-port' and 'host-port' as the sub-node name.

Changes in v2:
 - Changed vbus_host optional property from gpio to regulator.
 - Specified vbus_otg-supply optional property.
 - Specified otg_id and otg_bvalid property.

 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   64 ++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt 
b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
new file mode 100644
index 0000000..3c29c77
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,64 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+       * "rockchip,rk3366-usb2phy"
+       * "rockchip,rk3399-usb2phy"
+ - reg : the address offset of grf for usb-phy configuration.
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+
+Required nodes : a sub-node is required for each port the phy provides.
+                The sub-node name is used to identify host or otg port,
+                and shall be the following entries:
+       * "otg-port" : the name of otg port.
+       * "host-port" : the name of host port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+       * "otg-id" : for the otg id interrupt.
+       * "otg-bvalid" : for the otg vbus interrupt.
+       * "linestate" : for the host/otg linestate interrupt.
+
+Optional properties:
+ - phy-supply : phandle to a regulator that provides power to VBUS.
+               See ./phy-bindings.txt for details.
+
+Example:
+
+grf: syscon@ff770000 {
+       compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+...
+
+       u2phy: usb2-phy@700 {
+               compatible = "rockchip,rk3366-usb2phy";
+               reg = <0x700 0x2c>;
+               #clock-cells = <0>;
+               clock-output-names = "sclk_otgphy0_480m";
+
+               u2phy_otg: otg-port {
+                       #phy-cells = <0>;
+                       interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "otg-id", "otg-bvalid", "linestate";
+                       status = "okay";
+               };
+
+               u2phy_host: host-port {
+                       #phy-cells = <0>;
+                       interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "linestate";
+                       status = "okay";
+               };
+       };
+};
-- 
1.7.9.5


Reply via email to