..@kernel.org; mark.rutl...@arm.com; Michal Simek
> ; linux-me...@vger.kernel.org;
> devicet...@vger.kernel.org; hans.verk...@cisco.com; linux-arm-
> ker...@lists.infradead.org; linux-kernel@vger.kernel.org; Dinesh Kumar
> ; Sandip Kothari ; Luca Ceresoli
> ; Jacopo Mondi
> Subject: Re: [PA
Hi Vishal,
On Fri, Jun 07, 2019 at 07:11:47AM +, Vishal Sagar wrote:
...
> > > +/**
> > > + * xcsi2rxss_s_ctrl - This is used to set the Xilinx MIPI CSI-2 V4L2
> > > controls
> > > + * @ctrl: V4L2 control to be set
> > > + *
> > > + * This function is used to set the V4L2 controls for the
nel.org; mark.rutl...@arm.com; Michal
> Simek ; linux-me...@vger.kernel.org;
> devicet...@vger.kernel.org; hans.verk...@cisco.com; linux-arm-
> ker...@lists.infradead.org; linux-kernel@vger.kernel.org; Dinesh Kumar
> ; Sandip Kothari ; Luca Ceresoli
> ; Jacopo Mondi
> Subject: Re: [PATCH v8
Subject: Re: [PATCH v8 2/2] media: v4l: xilinx: Add Xilinx MIPI CSI-2 Rx
> Subsystem driver
>
> EXTERNAL EMAIL
>
> Hi Vishal,
>
> Some comments below...
>
> On 6/3/19 11:59 AM, Vishal Sagar wrote:
> > The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to captur
Hi Vishal,
On Mon, Jun 03, 2019 at 03:29:31PM +0530, Vishal Sagar wrote:
> The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images
> from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready
> for image processing. Please refer to PG232 for details.
>
> The driver is
Hi Vishal,
Some comments below...
On 6/3/19 11:59 AM, Vishal Sagar wrote:
> The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images
> from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready
> for image processing. Please refer to PG232 for details.
>
> The driver is
The Xilinx MIPI CSI-2 Rx Subsystem soft IP is used to capture images
from MIPI CSI-2 camera sensors and output AXI4-Stream video data ready
for image processing. Please refer to PG232 for details.
The driver is used to set the number of active lanes, if enabled
in hardware. The CSI2 Rx controller
7 matches
Mail list logo
