On Fri, 6 Jul 2001 07:56:39, [EMAIL PROTECTED] wrote:
> What I don't get about your patch is the following:
Two things:
1) I must not try to type in patches while watching my phone bill to
BT click up the pennies!
2) I must check the source I'm diffing against to make sure that Alan
hasn't
> There's a bug in i91uscsi.c, init_tulip where it cycles through the
> onboard NVRAM config. On the controller there's a single byte per
> device but it cycles through the NVRAM in words. Since x86 words are
> two bytes a piece this means that the code uses the NVRAM config for
> the device on
There's a bug in i91uscsi.c, init_tulip where it cycles through the
onboard NVRAM config. On the controller there's a single byte per
device but it cycles through the NVRAM in words. Since x86 words are
two bytes a piece this means that the code uses the NVRAM config for
the device on twice
On Fri, 6 Jul 2001 07:56:39, [EMAIL PROTECTED] wrote:
What I don't get about your patch is the following:
Two things:
1) I must not try to type in patches while watching my phone bill to
BT click up the pennies!
2) I must check the source I'm diffing against to make sure that Alan
hasn't
On Thu, 5 Jul 2001 11:32:12, [EMAIL PROTECTED] wrote:
> > I have a problem with the driver for Initio SCSI Controller 9100 SCSI,
> > a dual channel UW SCSI-Controller. On checking the SCSI bus the systems
> > has problems to initialize the CD-RW Sanyo (aka Brainwave) BP4-N SCSI
> > The CD-RW has
Hi Ingo,
> I have a problem with the driver for Initio SCSI Controller 9100 SCSI,
> a dual channel UW SCSI-Controller. On checking the SCSI bus the systems
> has problems to initialize the CD-RW Sanyo (aka Brainwave) BP4-N SCSI
> The CD-RW has SCSI-ID 6 on the second Controller. It is shown on
>
Hi Ingo,
I have a problem with the driver for Initio SCSI Controller 9100 SCSI,
a dual channel UW SCSI-Controller. On checking the SCSI bus the systems
has problems to initialize the CD-RW Sanyo (aka Brainwave) BP4-N SCSI
The CD-RW has SCSI-ID 6 on the second Controller. It is shown on
On Thu, 5 Jul 2001 11:32:12, [EMAIL PROTECTED] wrote:
I have a problem with the driver for Initio SCSI Controller 9100 SCSI,
a dual channel UW SCSI-Controller. On checking the SCSI bus the systems
has problems to initialize the CD-RW Sanyo (aka Brainwave) BP4-N SCSI
The CD-RW has SCSI-ID
Hallo,
I have a problem with the driver for Initio SCSI Controller 9100 SCSI,
a dual channel UW SCSI-Controller. On checking the SCSI bus the systems
has problems to initialize the CD-RW Sanyo (aka Brainwave) BP4-N SCSI
The CD-RW has SCSI-ID 6 on the second Controller. It is shown on
system
Hallo,
I have a problem with the driver for Initio SCSI Controller 9100 SCSI,
a dual channel UW SCSI-Controller. On checking the SCSI bus the systems
has problems to initialize the CD-RW Sanyo (aka Brainwave) BP4-N SCSI
The CD-RW has SCSI-ID 6 on the second Controller. It is shown on
system
10 matches
Mail list logo