|
To get the eepro100 ethernet card going on this
motherboard (Intel D815EAA)
I had to add....
***
linux-2.4.0-test8/drivers/net/eepro100.c Sat Aug 12 14:14:46 2000
--- linux-2.4.0-test8-old/drivers/net/eepro100.c Thu Sep 21 13:20:15 2000 *************** *** 2273,2278 **** --- 2273,2280 ---- PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ID1030, PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82820FW_4, + PCI_ANY_ID, PCI_ANY_ID, }, { 0,} }; MODULE_DEVICE_TABLE(pci, eepro100_pci_tbl); This makes the eepro100 driver work with the
ethernet card . I've been using it for the last 3 days perfectly well with no
errors...
Bus 1, device 8, function 0: Ethernet controller: Intel Corporation 82820 820 (Camino 2) Chipset Ethernet (rev 1). IRQ 11. Master Capable. Latency=64. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xff8ff000 [0xff8fffff]. I/O at 0xdf00 [0xdf3f]. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.33 $ 2000/05/24 Modified by Andrey V. Savochkin <[EMAIL PROTECTED]> and others eth1: Intel Corporation 82820 820 (Camino 2) Chipset Ethernet, 00:D0:B7:C6:BF:89, IRQ 11. Receiver lock-up bug exists -- enabling work-around. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). |
