On 01 July 2020 19:24, Pierre-Louis Bossart wrote: > Fix W=1 warning, the kernel-doc syntax was probably from Doxygen? > > Signed-off-by: Pierre-Louis Bossart <pierre-louis.boss...@linux.intel.com>
So is the issue that the Kernel warning mechanism doesn't like Doxygen syntax? If so then: Acked-by: Adam Thomson <adam.thomson.opensou...@diasemi.com> > --- > sound/soc/codecs/da7210.c | 12 +++++++----- > 1 file changed, 7 insertions(+), 5 deletions(-) > > diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c > index 0c99dcf242e4..2bb727dd3a20 100644 > --- a/sound/soc/codecs/da7210.c > +++ b/sound/soc/codecs/da7210.c > @@ -971,14 +971,16 @@ static int da7210_set_dai_sysclk(struct snd_soc_dai > *codec_dai, > > /** > * da7210_set_dai_pll :Configure the codec PLL > - * @param codec_dai : pointer to codec DAI > - * @param pll_id : da7210 has only one pll, so pll_id is always zero > - * @param fref : MCLK frequency, should be < 20MHz > - * @param fout : FsDM value, Refer page 44 & 45 of datasheet > - * @return int : Zero for success, negative error code for > error > + * @codec_dai: pointer to codec DAI > + * @pll_id: da7210 has only one pll, so pll_id is always zero > + * @source: clock source > + * @fref: MCLK frequency, should be < 20MHz > + * @fout: FsDM value, Refer page 44 & 45 of datasheet > * > * Note: Supported PLL input frequencies are 12MHz, 13MHz, 13.5MHz, 14.4MHz, > * 19.2MHz, 19.6MHz and 19.8MHz > + * > + * Return: Zero for success, negative error code for error > */ > static int da7210_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, > int source, unsigned int fref, unsigned int fout) > -- > 2.25.1
